RE: Cisco Gateway and GK

Glen Sykes <Glen.Sykes@xxxxxxxxxxxxxxxxx> · Fri, 3 Sep 2004 10:17:02 +0100

Title: Message

I'm unfamiliar with the VoIP GW, only the videoconferencing 
GW's.  However they may be similar in their operation.

Have you tried the tech support forum on the Cisco 
website?

From: Abano, Fernando A. (ePerformax) 
[mailto:fabano@xxxxxxxxxxxxxx] 
Sent: 02 September 2004 
23:24
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: 
RE:  Cisco Gateway and GK

Its 
the 3660 VOIP gateway

  -----Original Message-----
From: 
  openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx 
  [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Glen 
  Sykes
Sent: Friday, September 03, 2004 1:20 AM
To: 
  openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: RE: 
   Cisco Gateway and GK

  Which Cisco gateway are you using?  Is it the Voip 
  gateway on the router, or the 3540 / 3526 videoconferencing 
  gateway?

  From: Abano, Fernando A. (ePerformax) 
  [mailto:fabano@xxxxxxxxxxxxxx] 
Sent: 02 September 2004 
  15:48
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: 
  RE:  Cisco Gateway and GK

  does not cover 
  info on how inbound from gateway to EP is accomplished (whether dial-peers 
  need to be created, and how. am only familiar with POTS and VOIP dial peers 
  but it seems not to work with an H323 EP like openphone). available info is 
  how to configure the cisco as a gateway, which i already have. what i want to 
  accomplish is to simulate an inbound call to an EP that is registered with GK. 
  example:

  EP is 
  2124569870

  from the gateway, 
  i should be able to send an inbound to this endpoint by 
  issuing:

  csim start 
  2124569870

  and it should 
  ring the EP.

 -----Original Message-----
From: 
  openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx 
  [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of 
  Rafat Subhan
Sent: Thursday, September 02, 2004 9:54 
  PM
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: Re: 
   Cisco Gateway and GK

    http://www.gnugk.org/h323infolinks.html

      ----- Original Message ----- 
      From: 
      Abano, 
      Fernando A. (ePerformax) 
      To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx 

      Sent: Thursday, September 02, 2004 
      05:50 PM
      Subject:  Cisco 
      Gateway and GK

      Is anyone 
      familiar on how to configure a Cisco gateway so that I can 
      send calls from that gateway to a gnugk endpoint? The gateway registers 
      with GK. 

      I am able to 
      place calls from the EP via the gateway, but I am not familiar on the 
      configuration of the gateway so that it is able to send incoming calls to 
      the EP. 