Which Cisco gateway are you using? Is it the Voip
gateway on the router, or the 3540 / 3526 videoconferencing
gateway?
does not cover
info on how inbound from gateway to EP is accomplished (whether dial-peers
need to be created, and how. am only familiar with POTS and VOIP dial peers
but it seems not to work with an H323 EP like openphone). available info is
how to configure the cisco as a gateway, which i already have. what i want to
accomplish is to simulate an inbound call to an EP that is registered with GK.
example:
EP is
2124569870
from the gateway,
i should be able to send an inbound to this endpoint by
issuing:
csim start
2124569870
and it should
ring the EP.
-----Original Message-----
From:
openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx
[mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of
Rafat Subhan
Sent: Thursday, September 02, 2004 9:54
PM
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: Re:
Cisco Gateway and GK
----- Original Message -----
Sent: Thursday, September 02, 2004
05:50 PM
Subject: Cisco
Gateway and GK
Is anyone
familiar on how to configure a Cisco gateway so that I can
send calls from that gateway to a gnugk endpoint? The gateway registers
with GK.
I am able to
place calls from the EP via the gateway, but I am not familiar on the
configuration of the gateway so that it is able to send incoming calls to
the EP.
