RE: Cisco Gateway and GK

["Abano, Fernando A. \(ePerformax\)" <fabano@xxxxxxxxxxxxxx>]

Title: Message

does not cover info on how inbound from gateway to EP is accomplished (whether dial-peers need to be created, and how. am only familiar with POTS and VOIP dial peers but it seems not to work with an H323 EP like openphone). available info is how to configure the cisco as a gateway, which i already have. what i want to accomplish is to simulate an inbound call to an EP that is registered with GK. example:

 

EP is 2124569870

 

from the gateway, i should be able to send an inbound to this endpoint by issuing:

 

csim start 2124569870

 

and it should ring the EP.

 

 

 -----Original Message-----
From: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Rafat Subhan
Sent: Thursday, September 02, 2004 9:54 PM
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: Re: Cisco Gateway and GK

 

http://www.gnugk.org/h323infolinks.html

 

----- Original Message -----

From: Abano, Fernando A. (ePerformax)

To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx

Sent: Thursday, September 02, 2004 05:50 PM

Subject: Cisco Gateway and GK

 

Is anyone familiar on how to configure a Cisco gateway so that I can send calls from that gateway to a gnugk endpoint? The gateway registers with GK.

 

I am able to place calls from the EP via the gateway, but I am not familiar on the configuration of the gateway so that it is able to send incoming calls to the EP.