Is the sample tariff table not enough? I built it up from the asc file and I used those destination prefixes -----Original Message----- From: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Michal Zygmuntowicz Sent: Wednesday, August 04, 2004 10:51 PM To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Subject: RE: Help So if you do not have tariff tables set up - your calls will not be billed - that's rather obvious... no price = no cost If you want a billing, you need to setup tariff tables with destination prefixes and pricing info. On Wed, 2004-08-04 at 16:18, Abano, Fernando A. (ePerformax) wrote: > Yes I do not have entries for those 2 tables. Still figuring out what > to fill them with. Only the voipuser table is examined for > authentication, and calls are logged in voipcall but all without cost. > The tariff table was filled with the sample file ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
