Hi Zygmuntowicz Michal and everyone, Do you mean that my gateway needs to support H.235 username/password(CAT)? I have not heard about this H.235 before. Does it supported by Cisco gateway only? In fact, My gateway doesn't support H.235, can you give me an example how to configure the gatekeeper using RadAliasAuth? Do I need to set the FixedUsername and FixedPassword attribute? Or, do I just replace [RadAuth] with [RadAliasAuth]? Best Regards, Thomas MSN: support@xxxxxxxxxxxx ----- Original Message ----- From: "Zygmuntowicz Michal" <m.zygmuntowicz@xxxxxxx> To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx> Sent: Thursday, June 10, 2004 7:24 PM Subject: Re: Problem with Radius Server > It usually means that your endpoint is either not configured > to use H.235 username/password (CAT) or does not support > this type of authentication at all. You may use RadAliasAuth then. > > ----- Original Message ----- > From: "Thomas Tam" <development@xxxxxxxxxxxx> > Sent: Thursday, June 10, 2004 12:51 PM > > > Hi everyone, > > I have encountered a problem when I try to connect my GnuGk 2.0.7 to Advanced Radius Server. Let's see my simple configuration: > > ---------------------------- > [Gatekeeper::Main] > Fourtytwo=42 > > [RoutedMode] > GKRouted=1 > H245Routed=1 > CallSignalPort=1720 > SupportNATedEndpoints=1 > AcceptUnregisteredCalls=1 > Q931PortRange=30000-30199 > H245PortRange=30200-30399 > > [GkStatus::Auth] > rule=allow > > [Gatekeeper::Auth] > RadAuth=required;RRQ,ARQ > > [RadAuth] > #Radius server IP and port for Authentication > Servers=218.103.83.156:1812 > SharedSecret=mysecret > LocalInterface=218.103.83.156 > AppendCiscoAttributes=1 > IncludeTerminalAliases=1 > IncludeEndpointIP=1 > > [Gatekeeper::Acct] > RadAcct=required;start,stop > > [RadAcct] > #Radius server IP and port for Accounting > Servers=218.103.83.156:1813 > SharedSecret=mysecret > LocalInterface=218.103.83.156 > AppendCiscoAttributes=1 > IncludeEndpointIP=1 > -------------------------------------- > > When I try to connect a gateway to gatekeeper, after enabling the radius server, I cannot register successfully with the folllowing > message in debug mode: > > RADAUTH RRQ Auth failed - no m_tokens > > >From my status port, I see the following message: > > RRJ|218.103.83.156|abc:h323_id=1000:dialedDigit|gateway|securityDenial > > can somebody help me? > > > Best Regards, > Thomas Tam > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: GNOME Foundation > Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event. > GNOME Users and Developers European Conference, 28-30th June in Norway > http://2004/guadec.org > > _______________________________________________________ > > List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ > > ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
