Re: Accepting calls only from authorized GWs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi there,
            See my comments below:

On Friday 19 March 2004 20:09, ray wrote:
> > Wasn't the Neighbors Section made for sending and accepting LRQs from
> > other GKs?
> > In my case, I would receive Setup messages from a well-known GW that is
> > not registered to me. But, I should only accept it's call if the dialed
> > digits have the correct prefix.
>
> you are correct but it is my experience that also putting a GW in the
> neighbors section will also allow GK to accept calls from un-registered
> endpoints if it matches the criteria in the neighbors section. with this in
> mind you can enter this information from this un-registered gw in neighbors
> and i think it should accept and process these calls.

I tried setting the Neighbors Section in the gnugk version 2 beta 3, in order 
to accept incoming calls from unregistered GWs, and it did not work. I tried 
it with a Cisco 3640 with a 2 port FXs card.
Could you send me an ini file along with the scheme were this ini file should 
be set?

>
> > The ARQ message should be sent from my proxy to my GK, in order to know
> > where the call would end. The call flow should be something like this:
> >
> > Foreign GW       My Proxy            My GK    My GW
> >
> >     |------- Setup ----> | ------- ARQ ------>|             |
> >     |
> >     |                        |<------- ACF --------|             |
> >     |                        | -------- Setup ----------------->|
>
> i guess i dont understand what "your proxy" is. is this another gnugk?
> i do think that in order for the proxy to send ARQ messages it will have to
> be successfully registered with gnugk.

Yes. The proxy is another gnugk. And yes, it is succesfully registered to the 
Parent GK (alias My GK).


> regards
> ray
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Homepage: http://www.gnugk.org/



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux