If you register ohphone listening with the signalling port other than 1720,
the calls are routed correctly. I use such setup very often to run a few
H.323 endpoints on one machine for tests.
----- Original Message -----
From: "Craig Southeren" <craigs@xxxxxxxxxxxxxxxxx>
Sent: Friday, March 19, 2004 8:03 AM
> To all,
>
> I am debugging a system for a customer, and it appears that GnuGK
> is using the wrong port when sending calls an endpoint.
>
> Here is the scenario:
>
> 1) The customer is running GnuGK in proxy mode, so all signalling
> connections are made through GnuGK
>
> 2) I have an endpoint registered with GnuGK, and it has told GnuGK to
> use port use 10130 for signalling. The important part of the RRQ is
> below:
>
> registrationRequest {
> requestSeqNum = 62336
> protocolIdentifier = 0.0.8.2250.0.4
> discoveryComplete = TRUE
> callSignalAddress = 1 entries {
> [0]=ipAddress {
> ip = 4 octets {
> ..removed...
> }
> port = 10130
> }
> }
> rasAddress = 1 entries {
> [0]=ipAddress {
> ip = 4 octets {
> ..removed...
> }
> port = 10131
> }
> }
>
> 3) When I use another endpoint to make a call to this endpoint, the
> incoming signalling connection from GnuGK is made to port 1720 on the
> endpoint, not port 10130. This is NOT correct
>
> Before I tell the customer to start looking for the incorrect code in
> GnuGK, can someone else confirm that this is actually a bug in GnuGK, or
> whether it is this likely to be a configuration problem?
>
> Craig
>
>
> -----------------------------------------------------------------------
> Craig Southeren, craigs@xxxxxxxxxxxxxxxxx http://www.postincrement.com
> Post Increment - Software, Consulting and Services
> Co-founder of the only open source H.323 project
> Phone: +61 2 43654666 Fax: +61 2 43673140 Mobile: +61 417 231046
> ICQ: #86852844 MSN: craig_southeren@xxxxxxxxxxx
> PGP Key: http://www.postincrement.com/pgp.txt
> Blog: http://www.southeren.com/blog
>
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
