To all,
I am debugging a system for a customer, and it appears that GnuGK
is using the wrong port when sending calls an endpoint.
Here is the scenario:
1) The customer is running GnuGK in proxy mode, so all signalling
connections are made through GnuGK
2) I have an endpoint registered with GnuGK, and it has told GnuGK to
use port use 10130 for signalling. The important part of the RRQ is
below:
registrationRequest {
requestSeqNum = 62336
protocolIdentifier = 0.0.8.2250.0.4
discoveryComplete = TRUE
callSignalAddress = 1 entries {
[0]=ipAddress {
ip = 4 octets {
..removed...
}
port = 10130
}
}
rasAddress = 1 entries {
[0]=ipAddress {
ip = 4 octets {
..removed...
}
port = 10131
}
}
3) When I use another endpoint to make a call to this endpoint, the
incoming signalling connection from GnuGK is made to port 1720 on the
endpoint, not port 10130. This is NOT correct
Before I tell the customer to start looking for the incorrect code in
GnuGK, can someone else confirm that this is actually a bug in GnuGK, or
whether it is this likely to be a configuration problem?
Craig
-----------------------------------------------------------------------
Craig Southeren, craigs@xxxxxxxxxxxxxxxxx http://www.postincrement.com
Post Increment - Software, Consulting and Services
Co-founder of the only open source H.323 project
Phone: +61 2 43654666 Fax: +61 2 43673140 Mobile: +61 417 231046
ICQ: #86852844 MSN: craig_southeren@xxxxxxxxxxx
PGP Key: http://www.postincrement.com/pgp.txt
Blog: http://www.southeren.com/blog
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
