Hello, I have a gnugk 2.0.7 with latest pwlib-1.6.2/openh323-1.13.2 running on a 2GHz Celeron and 1GB RAM slack instalation working as a h323 full proxy. When under heavy load it's making 90-150 concurent calls. uptime is ~0.50 cpuload is @60% memory is hardly used The problem is as follows: - it gets a setup message - sends a setup to other party - gets/sends a connect (call established) - call runs for some time and is disconnected with DRQ/ReleaseComplete - origination and termination parties both understand that the call has ended - my gnugk - does not; the call keeps hanging in the call list (shows after 'c' on :7000) - after timeout, the gnugk removes the call from its call list and does all the accounting actions it usually does. Thus, I'm left with real calls for which both (orig/term) parties have a correct accounting and I have a max-duration call in mine. If anyone has experienced anything similar or has a solution for this particular problem, I'll be very happy to hear about it. BTW, when I reroute the calls to come to the gnugk via a cisco IPIP gateway - the problem disappears - even under heavy load. Looks to me like a signaling interoperability problem but who knows... All info is much appreciated. Thanks, KTsolov -- "Talk is cheap because supply always exceeds demand." -- source unknown /~\ The ASCII \ / Ribbon Campaign X Against HTML Konstantin Tsolov.............ktsolov at etel dot bg / \ Email! Systems Administrator......eTel Ltd, Sofia, Bulgaria ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&opМk _______________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id…49 Homepage: http://www.gnugk.org/
