Hi, I am trying to get a gnu-gk working for the first time. I would like it to interwork with my service provider's Cisco H323 infrastructure. Currently I have it half working. It routes E.164 calls in to the zone and out of the zone to other destinations where the endpoints are PolyCom iPower 2.0.4. These remote terminals register with a Cisco MCM/proxy and are part of the educational networks Global Dialing Scheme using a E.164 number plan. Addresses are resolved via a top-level 'directory gatekeeper' (another Cisco). But when I try to or from an MCU (a PolyCom MGC 100) in the same way (the MCU is also registered with a Cisco), the call fails. My gnu-gk outputs sensible LCF messages (I think the address resolution works), but then it outputs the following: ARJ|192.88.9.6:1720|4401970639469:dialedDigits=100:dialedDigits=aber-penglai s-wv @aber.ac.uk:h323_ID|ED-JCMB-2009:h323_ID=0044011491001:dialedDigits|true|rou teCallToGatekeeper; I have also tried connecting to a newer PolyCom using E.164: that works, but it can't connect to me (Destination Unreachable) it is running current PolyCom iPower software. I get a similar ARJ message when it tries. None of this works using IP addresses either....and it doesn't make a difference if the gnu-gk is in routed mode or not. I have asked for a copy of the config of the remote end gatekeeper Ciscos to compare to the ones that do work, but the only other difference between the successful calls and the unsuccessful calls is that the successful calls are running later versions of the PolyCom software (MCU or terminal). Have others been able to get gnu-gk interworking with PolyComs registered with Ciscos? I have tried using ArjReasonRouteCallToGatekeeper=0 - but that didn't seem to make a difference. The gnu-gk config.ini file I am using is below. The gnu-gk website claims compatibility with the Accord 100 MCU and the PolyCom 512, ViewStation and Via Video, but it does not mention the iPower or the PolyCom MGC 100 - is this because they don't interwork? has anyone got them to do so? have tried to RTFM to no avail. Any comments appreciated. Many thanks, Geoff (gatekeeper.ini is below signature) Geoff Constable Canolfan Cyfnogaeth Rhwydwaith Fideo Cymru Welsh Video Network Support Centre Prifysgol Cymru, University of Wales, Aberystwyth e: ccc@xxxxxxxxxx ff/t: 01970 622475 s/m: 07866 593773 e.164: 004401101100 vc ip: 192.88.9.6 vc isdn: 01970 639469 http://www.wvn.ac.uk [Gatekeeper::Main] Fourtytwo=42 Name=test-gk [Gatekeeper::Auth] #method of authentication of endpoints AliasAuth=required;RRQ default=allow [RasSrv::RRQAuth] #definition of allowable endpoints 100=sigip:xxx.xx.x.x:1720 102=sigip:xxx.xx.x.x:1720 default=reject [GkStatus::Auth] #who can view the gk status rule=explicit xxx.xx.x.x=1 [RasSrv::Neighbors] #neighbour gatekeeper - send LRQs to here name.domain.net=xxx.xx.xx.xx:1719;* [RasSrv::LRQFeatures] #parameters for forwarding LRQs to neighbour AlwaysForwardLRQ=1 IncludeDestinationInfoInLCF=0 NeighborTimeout=2 ForwardHopCount=9 CiscoGKCompatible=1 ForwardHopCount=9 [RoutedMode] #routed mode configuration GKRouted=1 H245Routed=1 AcceptNeighborCalls=1 RemoveH245AddressOnTunneling=1 DropCallsByReleaseComplete=1 SendReleaseCompleteOnDRQ=1 [Proxy] #is there but we don't want it at the moment. Enable=0 [RasSrv::RewriteE164] #strip this number from incoming E164 addresses 004401173= ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
