Maybe be gateway sends malformed ANS.1 encoded message. If so, nothing can be done. Otherwise, details message analysis would be required. ----- Original Message ----- From: "Peter Zeltins" <peter@xxxxxxxxxxxxxxxx> Sent: Friday, March 05, 2004 8:43 AM > Did that, no change whatsoever. Still "couldnt decode message" on GK > console. Any other suggestions? > > > Maybe try to compile the gk with the latest OpenH323 libraries > > and see if the problem persists. > > > > ----- Original Message ----- > > From: "Peter Zeltins" <peter@xxxxxxxxxxxxxx> > > Sent: Tuesday, March 02, 2004 11:24 AM > > > > > >> I have (old) Vocaltec 8 port gateway. It registers with GnuGK fine, > >> but > >> during call setup I'm getting "Cannot decode message" on gatekeeper's > >> console. Calls are not going thru (Asterisk on other end). Any > >> pointers on > >> how to make VGW8 work with GK, or trace the problem to it's cause? ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
