Thanks Teodor ; But i am sorry , can u help me to know how to implement the interaction between Siemens and Gnugk is via RRQ. thanks in advance eric ----- Original Message ----- From: "Teodor Georgiev" <teodor@xxxxxxxxx> To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx> Sent: Thursday, February 19, 2004 10:03 AM Subject: Re: Proxy mode With Siemens Hipath 5500 > > > Yes, > > I had the same problem with Siemens HiPath + VG-150 H.323 module. > When Gnugk is in proxy mode, it doesn't work. > As I saw, the only way for interaction between Siemens (they use RadVision's > H.323 stack) and Gnugk is via RRQ. > Also, I was not able to find in their documentation how to route all calls > with a prefix to the gatekeeper. Honestly said, it is a big shame for > Siemens, because their H.323 implementation SUX. They do not have an option > to set the RRQ TTL or the H.323 ID. > > > On Wednesday 18 February 2004 16:51, General wrote: > > Hi all, > > How r u .? > > does any one install and configure GnuGK with Siemens Hipath 5500 .? > > i installed Siemens Hipath in my Private IP LAN ..behined Firewall. > > i use VPN to connect our external user to LAN , and Siemens Hipath Does = > > not work with VPN . so i decide to use GNUGK in Proxy mod > > GNUGK work will if it is stand alone GK, But When Configure it with = > > Siemens Hipath in Proxy mode , it do not work > > > > My GNUGK configuration is > > > > -------------------------------------------------------------------------- - > >------------------------------------------------ > > > > [Gatekeeper::Main] > > > > Fourtytwo=42 > > > > TimeToLive=600 > > > > [RoutedMode] > > > > GKRouted=1 > > > > H245Routed=0 > > > > CallSignalPort=1721 > > > > SupportNATedEndpoints=1 > > > > [Proxy] > > > > Enable=1 > > > > InternalNetwork=172.16.3.0/23,127.0.0.0/8 > > > > T120PortRange=40000-40999 > > > > RTPPortRange=50000-59999 > > > > ProxyForNAT=1 > > > > ProxyForSameNAT=0 > > > > [Endpoint] > > > > Gatekeeper=MY_SIEMENS_GK_IP > > > > Type=Gateway > > > > H323ID=THE_ALLOWED_EXTERNAL_USER_ID > > > > TimeToLive=900 > > > > RRQRetryInterval=10 > > > > ARQTimeout=2 > > > > [GkStatus::Auth] > > > > rule=explicit > > > > 127.0.0.1=allow > > > > Default=forbid > > > > > > -------------------------------------------------------------------------- - > >---------------------------------------------------and at Siemens Hipath > > 5500 , i configured the EXTERNAL_USER subscriber account as > > PreAuthanticated user through the IP of GNUGK. can any one Help me..? > > Thanks > > > > > > Eric. > > -- > Best regards, > > Teodor Georgiev > Information Services Plc. > Tel : +359 2 96562008 > Mobile: +359 887 508989 > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ > ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
