You should then setup this gw as a neighbor and allow calls from neighbors or allow all calls from unregistered endpoints. Please browse the archive for more details. ----- Original Message ----- From: "Alexandru Coseru" <alex_spam@distinctgroup.net> Sent: Wednesday, February 11, 2004 8:43 AM > I thought so... > > I've tried with gk in routed mode , but now I get in cdrs unconnected and > call duration is 0 seconds. > > Could it be due the fact that in cisco i'm using session target ipv4 rather > that session target ras ? > > > Regards > Alex > ----- Original Message ----- > From: "Zygmuntowicz Michal" <m.zygmuntowicz@onet.pl> > To: <openh323gk-users@lists.sourceforge.net> > Sent: Wednesday, February 11, 2004 1:03 AM > Subject: Re: Call duration difference in gnugk and as5310 > > > > Two things: > > 1. you will never get call duration as accurate as from a termination > gateway with gnugk, > > but this should be close enough for real life situations > > 2. if you are not using routed mode, using call duration reported from the > gatekeeper > > is rather questionable - the gatekeeper can only measure time between > ARQ and DRQ. > > This causes call duration to include pre-setup (from arq to Setup) and > "ringback" time (from Setup to Connect) > > - I think that's the reason of the difference. > > > > ----- Original Message ----- > > From: "Alexandru Coseru" <alex_spam@distinctgroup.net> > > Sent: Tuesday, February 10, 2004 7:48 PM > > > > > > Hello.. > > > > I have connected some cisco's to my gnugk 2.07 and I've observed some > differences betweens the cdr's in the gnugk and cisco's... > > > > > > Here is from gnugk: > > > > > > CDR|335|43 42 e7 4f 6e 1e d6 11 94 b8 44 45 53 54 00 00|207|Tue, 10 Feb > 2004 18:37:08 GMT|Tue, 10 Feb 2004 18:40:35 > > GMT|xx.yy.zz.ww:2063| > |aa.bb.cc.dd:1720|3285_endp|00441629540767:dialedDigits|aaa@bbb:h323_ID|ukgk > 01; > > > > > > > > Here is a : show call history voice brief in cisco.. > > > > 2AC9 : 9959222hs.3495 +1163 +19489 pid:5555 Originate 00441629540767 > > dur 00:03:03 tx:1366/65568 rx:2249/53976 10 (normal call clearing.) > > Telephony 0:D (3476): tx:183060/2250/0ms g723r63 noise:-57dBm acom:0dBm > > > > 2AC9 : 9958045hs.3496 +2340 +20683 pid:0 Answer > > dur 00:03:03 tx:2249/53976 rx:1366/65568 10 (normal call clearing.) > > IP xx.yy.zz.ww:5474 rtt:0ms pl:26980/5340ms lost:19/4/9 > delay:102/69/119ms g723r63 > > > > It is a difference of several seconds (207 in gk , 183 in cisco) , and I > cannot find the cause... > > > > I'm running the gk without GKrouted or H245 routed.. > > The cisco is registred with the gk ... > > > > > > Thanks a lot > > Alex > > > > > > > > ------------------------------------------------------- > > The SF.Net email is sponsored by EclipseCon 2004 > > Premiere Conference on Open Tools Development and Integration > > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > > http://www.eclipsecon.org/osdn > > _______________________________________________ > > List: Openh323gk-users@lists.sourceforge.net > > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > > Homepage: http://www.gnugk.org/ > > > > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > List: Openh323gk-users@lists.sourceforge.net > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
