I thought so...
I've tried with gk in routed mode , but now I get in cdrs unconnected and
call duration is 0 seconds.
Could it be due the fact that in cisco i'm using session target ipv4 rather
that session target ras ?
Regards
Alex
----- Original Message -----
From: "Zygmuntowicz Michal" <m.zygmuntowicz@onet.pl>
To: <openh323gk-users@lists.sourceforge.net>
Sent: Wednesday, February 11, 2004 1:03 AM
Subject: Re: Call duration difference in gnugk and as5310
> Two things:
> 1. you will never get call duration as accurate as from a termination
gateway with gnugk,
> but this should be close enough for real life situations
> 2. if you are not using routed mode, using call duration reported from the
gatekeeper
> is rather questionable - the gatekeeper can only measure time between
ARQ and DRQ.
> This causes call duration to include pre-setup (from arq to Setup) and
"ringback" time (from Setup to Connect)
> - I think that's the reason of the difference.
>
> ----- Original Message -----
> From: "Alexandru Coseru" <alex_spam@distinctgroup.net>
> Sent: Tuesday, February 10, 2004 7:48 PM
>
>
> Hello..
>
> I have connected some cisco's to my gnugk 2.07 and I've observed some
differences betweens the cdr's in the gnugk and cisco's...
>
>
> Here is from gnugk:
>
>
> CDR|335|43 42 e7 4f 6e 1e d6 11 94 b8 44 45 53 54 00 00|207|Tue, 10 Feb
2004 18:37:08 GMT|Tue, 10 Feb 2004 18:40:35
> GMT|xx.yy.zz.ww:2063|
|aa.bb.cc.dd:1720|3285_endp|00441629540767:dialedDigits|aaa@bbb:h323_ID|ukgk
01;
>
>
>
> Here is a : show call history voice brief in cisco..
>
> 2AC9 : 9959222hs.3495 +1163 +19489 pid:5555 Originate 00441629540767
> dur 00:03:03 tx:1366/65568 rx:2249/53976 10 (normal call clearing.)
> Telephony 0:D (3476): tx:183060/2250/0ms g723r63 noise:-57dBm acom:0dBm
>
> 2AC9 : 9958045hs.3496 +2340 +20683 pid:0 Answer
> dur 00:03:03 tx:2249/53976 rx:1366/65568 10 (normal call clearing.)
> IP xx.yy.zz.ww:5474 rtt:0ms pl:26980/5340ms lost:19/4/9
delay:102/69/119ms g723r63
>
> It is a difference of several seconds (207 in gk , 183 in cisco) , and I
cannot find the cause...
>
> I'm running the gk without GKrouted or H245 routed..
> The cisco is registred with the gk ...
>
>
> Thanks a lot
> Alex
>
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> List: Openh323gk-users@lists.sourceforge.net
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Homepage: http://www.gnugk.org/
>
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
