Hope that helps as introduction:
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_example09186a0080093f67.shtml
Sebastian Nocetti wrote:
Mensaje
I am interested on that Cisco Config, can you
be more deep about this?
Not a gatekeeper-feature, but some gateway's (e.g. cisco) allow to use
a feature called RAI (Ressource Availability Indicator) - the gateway
tells the gatekeeper, that it's not available anymore for outgoing
calls - but it stays registered.
This can be helpful, if for example 25 b-channels of a PRI are in use
and the gateway needs to be reachable from the outside so it doesn't
wants to use the last 5 channels for outgoing calls. The feature works
only, if you have more than one gateway serving the same prefix...
//Ronald Heitmann
Francisco J. Cano Sandoval wrote:
Ok. Then, if I want to limit number of endpoints and/or
calls, set these values and it is.
But, what happens if I do not want to limit those numbers?
There will be a number that, if overpassed, performance will
decrease until saturation. Do you know what I mean? I want to know such
a number or an approximation.
Thanks
again,
Francisco.
RedirectGK=Endpoints> 100 || Calls> 50
If you do not define alternate gatekeepers,
this will limit no. of endpoints and c. calls.
----- Original Message -----
From: "Steve Mace" <steve@so...>
Sent: Thursday, December 18, 2003 3:19 PM
> Where is this setting please? :-)
>
> > > 3.- How many connections does each GK support?
Machine limit or
> > > another value, modifiable via configuration files?
> >
> > You can limit max endpoints/calls in the config file.
|
