Actually David i think case 2 is only when GKRouted=1 and H245Routed=1. Case 3 is GKRouted=1, H245Routed=1 and proxy enable=1. Freddy -----Original Message----- From: David Stanaway [mailto:david@dialmex.net] Sent: Monday, December 08, 2003 10:51 AM To: openh323gk-users@lists.sourceforge.net Subject: Re: GKRouted I am not sure if this is a question or a statement, but if you are asking when it uses case II, then that is when you set GKRouted=1 and Enable=1 in the gatekeeper.ini file in the [RoutedMode] and [Proxy] sections respectively. EG: ... [RoutedMode] GKRouted=1 H245Routed=1 ... [Proxy] Enable=1 On Fri, 2003-12-05 at 08:08, Sebastian Nocetti wrote: > > Well, when GateKeeper uses 3rd (Case III) Routed mode?.... > > Case I. > > The gatekeeper doesn't route them. The H.245 control channel > and logical channels are established directly between the > endpoints. > > > Case II. > > The H.245 control channel is routed between the endpoints > through the gatekeeper, while the logical channels are > established directly between the endpoints. > > > Case III. > > The gatekeeper routes the H.245 control channel, as well as > all logical channels, including RTP/RTCP for audio and video, > and T.120 channel for data. In this case, no traffic is passed > directly between the endpoints. This is usually called an > H.323 Proxy, which can be regarded as an H.323-H.323 gateway. > > > > ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Homepage: http://www.gnugk.org/
