Re: Problem with a Cisco AS5400

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please search trough the list - there have been a lot of postings on the 
subject in the last few days...

Andrey.

В сообщении от Понедельник 10 Ноябрь 2003 14:14 Stelios V. Vaiopoulos написал:
> Hi all,
> 
> I have the following configuration:
> 
> Cisco AS5400 -> GNUGK v2.0.6 (routed mode) -> Cisco GW
> 
> GNUGK receives directly Call Setup from the AS5400 and directs it to the 
ending GW.
> The problem is that the calls don't last more than 30-50 seconds and they 
turn down with a Release Complete reason "Recovery on timer expiry" from the 
originating GW. Cisco site didn't help much as they talk about T304, T310 
ISDN timers which not apply on the current configuration of the AS5400.
> 
> I also observed that between Proceeding and Alerting messages I usually get 
a  "Proxy....read timeout?" message from the AS5400 and also I sometimes 
receive duplicate Call Setups from it.
> Pings between the AS5400 and GNUGK are near 200ms and another 150ms is 
between GNUGK and ending GW, so there must be no network problem.
> 
> Testing from a local softphone I have no problems at all.
> 
> Any help on that would be appreciated.
> 
> Stelios Vaiopoulos
> 



-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003,
16-19 November in Las Vegas. Learn firsthand the latest
developments in Apache, PHP, Perl, XML, Java, MySQL,
WebDAV, and more! http://www.apachecon.com/
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id┘49
Homepage: http://www.gnugk.org/


[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux