Calling-Station-Id = "101" because this is the first dialedDigits alias in registration table (see your RCF messages)... CallRec::GenerateCDR() shows you m_srcInfo taken from ACF, and RadAcct module gets Calling-Station-Id from callingEP->GetAliases() dialedDigits first (101:dialedDigits in your case)... -- Best regards, Andrey S Pankov. > Hi list: > I have several questions, to see if somebody can help a little. > > I have gateway with four entrances FXS, in these I have connected four > telephone, each one of these has assigned I number for example : > > Line 1 = 101 > Line 2 = 102 > Line 3 = 103 > Line 4 = 104 > > I connect the Gateway with the Gatekeeper working with radius. > When I make a call from line 101 in the data base is stored that the call > became from that gateway from line 101, but when I make a call from line > 102 in the data base does not insert the 102 if not that puts 101, this is > correct? not to put 102? > > and this is what it is seen in port 7000 of gatekeeper: > > ACF|192.168.1.38:1720|2165 > endp|22665|11111159842446552:dialedDigits=0059842446552:dialedDigits|gwpde- >dos:h323 ID=00040f004cb9:h323 ID=102:dialedDigits|false; > RCF|192.168.1.38:1720|gwpde-dos:h323 > ID=101:dialedDigits=102:dialedDigits=103:dialedDigits=104:dialedDigits|gate >way|2165 endp; RCF|192.168.1.38:1720|gwpde-dos:h323 > ID=101:dialedDigits=102:dialedDigits=103:dialedDigits=104:dialedDigits|gate >way|2165 endp; CDR|2|00 04 0f 00 4c b9 02 87 73 27 ee 30 11 72 03 > b6|0|unconnected|Wed, 29 Oct 2003 07:39:02 > -0300|192.168.197.38:1720|2165 endp|192.168.0.1:1720|2164 > endp|93734559842446552:dialedDigits=0059842446552:dialedDigits|gwpde-dos:h3 >23 ID=00040f004cb9:h323 ID=102:dialedDigits|RadiusGK; DCF|192.168.1.38|2165 > endp|22665|normalDrop; > > > that call was made from line 102 but in the data base inserted 101, but > this is what it shows radius to me: > > rad recv: Accounting-Request packet from host 192.168.1.180:10761, id=218, > length=443 > Acct-Status-Type = Stop > NAS-IP-Address = 192.168.1.180 > NAS-Identifier = "RadiusGK" > NAS-Port-Type = Virtual > Service-Type = Login-User > Acct-Session-Id = "b5d70002" > User-Name = "gwpde-dos" > Framed-IP-Address = 192.168.197.38 > Acct-Session-Time = 0 > Calling-Station-Id = "101" > Called-Station-Id = "11111159842446552" > h323-gw-id = "h323-gw-id=RadiusGK" > h323-conf-id = "h323-conf-id=40F00 4CB90287 73288436 108003B8" > h323-call-origin = "h323-call-origin=proxy" > h323-call-type = "h323-call-type=VoIP" > h323-setup-time = "h323-setup-time=07:40:21.000 UYT Wed Oct 29 2003" > h323-disconnect-time = "h323-disconnect-time=07:40:30.000 UYT Wed Oct 29 > 2003" > h323-disconnect-cause = "h323-disconnect-cause=0" > h323-remote-address = "h323-remote-address=192.168.0.1" > Acct-Delay-Time = 0 > > So that it puts 101 in "Calling-Station-Id" instead of 102. this is normal? > I need that I inserted in the data base I real number of where I am made > the call. > the same it happens if I call of the other lines (102, 103, 104) it always > inserts 101. > > I have some questions but but it will leave them for but late in the day. > Cheers. > > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > Does SourceForge.net help you be more productive? Does it > help you create better code? SHARE THE LOVE, and help us help > YOU! Click Here: http://sourceforge.net/donate/ > > List: Openh323gk-users@lists.sourceforge.net > Archive: http://sourceforge.net/mailarchive/forum.php?forum id?49 > Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Homepage: http://www.gnugk.org/