Hi list: I have several questions, to see if somebody can help a little. I have gateway with four entrances FXS, in these I have connected four telephone, each one of these has assigned I number for example : Line 1 = 101 Line 2 = 102 Line 3 = 103 Line 4 = 104 I connect the Gateway with the Gatekeeper working with radius. When I make a call from line 101 in the data base is stored that the call became from that gateway from line 101, but when I make a call from line 102 in the data base does not insert the 102 if not that puts 101, this is correct? not to put 102? and this is what it is seen in port 7000 of gatekeeper: ACF|192.168.1.38:1720|2165_endp|22665|11111159842446552:dialedDigits=0059842446552:dialedDigits|gwpde-dos:h323_ID=00040f004cb9:h323_ID=102:dialedDigits|false; RCF|192.168.1.38:1720|gwpde-dos:h323_ID=101:dialedDigits=102:dialedDigits=103:dialedDigits=104:dialedDigits|gateway|2165_endp; RCF|192.168.1.38:1720|gwpde-dos:h323_ID=101:dialedDigits=102:dialedDigits=103:dialedDigits=104:dialedDigits|gateway|2165_endp; CDR|2|00 04 0f 00 4c b9 02 87 73 27 ee 30 11 72 03 b6|0|unconnected|Wed, 29 Oct 2003 07:39:02 -0300|192.168.197.38:1720|2165_endp|192.168.0.1:1720|2164_endp|93734559842446552:dialedDigits=0059842446552:dialedDigits|gwpde-dos:h323_ID=00040f004cb9:h323_ID=102:dialedDigits|RadiusGK; DCF|192.168.1.38|2165_endp|22665|normalDrop; that call was made from line 102 but in the data base inserted 101, but this is what it shows radius to me: rad_recv: Accounting-Request packet from host 192.168.1.180:10761, id=218, length=443 Acct-Status-Type = Stop NAS-IP-Address = 192.168.1.180 NAS-Identifier = "RadiusGK" NAS-Port-Type = Virtual Service-Type = Login-User Acct-Session-Id = "b5d70002" User-Name = "gwpde-dos" Framed-IP-Address = 192.168.197.38 Acct-Session-Time = 0 Calling-Station-Id = "101" Called-Station-Id = "11111159842446552" h323-gw-id = "h323-gw-id=RadiusGK" h323-conf-id = "h323-conf-id=40F00 4CB90287 73288436 108003B8" h323-call-origin = "h323-call-origin=proxy" h323-call-type = "h323-call-type=VoIP" h323-setup-time = "h323-setup-time=07:40:21.000 UYT Wed Oct 29 2003" h323-disconnect-time = "h323-disconnect-time=07:40:30.000 UYT Wed Oct 29 2003" h323-disconnect-cause = "h323-disconnect-cause=0" h323-remote-address = "h323-remote-address=192.168.0.1" Acct-Delay-Time = 0 So that it puts 101 in "Calling-Station-Id" instead of 102. this is normal? I need that I inserted in the data base I real number of where I am made the call. the same it happens if I call of the other lines (102, 103, 104) it always inserts 101. I have some questions but but it will leave them for but late in the day. Cheers. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Homepage: http://www.gnugk.org/
