need to know how to include framed-ip-address of the origin on this setup: origin termination Cisco ---> GnuGK ---> Gateway Hardware wherein: GnuGK = xyz.xxx.yyy.zzz Dialled number = xxxxxxx Termination = abc.aaa.bbb.ccc See Radius Log: Acct-Status-Type = Start NAS-IP-Address = xyz.xxx.yyy.zzz NAS-Identifier = "Gatekeeper" NAS-Port-Type = 5 Service-Type = Login-User Acct-Session-Id = "c5c2000d" User-Name = "voip" Called-Station-Id = "xxxxxxx" h323-gw-id = "h323-gw-id=Gatekeeper" h323-conf-id = "h323-conf-id=34303863 32323034 37656363 38376139" h323-call-origin = "h323-call-origin=proxy" h323-call-type = "h323-call-type=VoIP" h323-setup-time = "h323-setup-time=12:44:49 PHT Thu Oct 16 2003" h323-remote-address = "h323-remote-address=abc.aaa.bbb.ccc" Acct-Delay-Time = 0 See radacct Config: [Gatekeeper::Acct] RadAcct=required;start,stop,update,on,off FileAcct=required [FileAcct] DetailFile=/var/log/cdr.log Rotate=0 [RadAcct] Servers=xxx.yyy.zzz.1 RadiusPortRange=10000-11000 DefaultAcctPort=1813 SharedSecret=somesecret RequestTimeout=3500 IdCacheTimeout=9000 SocketDeleteTimeout=60000 RequestRetransmissions=4 RoundRobinServers=1 AppendCiscoAttributes=1 IncludeEndpointIP=1 <---- I was even hoping this could help. FixedUsername=someuser I need to have a Framed-IP-Address.. i use ICRadius 0.18.1 and GnuGK v2.0.6. I also noticed error like this found on my gnugk.log: 2003/10/16 12:54:57.617 2 radacct.cxx(330) RADACCT Could not determine Calling-Station-Id for the call 0 Thank you very much. regards, gene ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/