You should not setup GK2 as your neighbor. The config entry: [RasSrv::Neighbors] GK2=GK2_IP_ADDRESS is just present to signal that calls incoming from this GK to your GK should be classified as "neighbor calls". Important note is that you should not define here anything more to the IP address (no prefix,...), because you do not want to send LRQ messages GK2. GK2 is configured as a permament endpoint and has a prefix assigned in other config sections. ----- Original Message ----- From: "Ray Jackman" <ray@havenet.com> Sent: Friday, October 03, 2003 11:21 PM > first i would like to thank michal and others for your detailed and thoughtful response. > > i now understand the problem in detail. i have tried the below configuration but i will have to > make changes to the GK2 (not mine) as when i set it up he configured me as an endpoint or > GW and when i put him in as a neighbor he is not accepting my LRQ request it seems. in > logging it indicates cannot find destination. i did make the config file exactly as you > suggested, i added the dial prefixes (555) for which i pad the front of teh call that i send to > him. this is what i had when i include him as perm endpoing and routing works fine. in my > last test GK1 originates call as neighbor, i recieve call and attempt to route to peremant > endpoint defined in gnugk. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
