Greate, How can I configure it? -----Original Message----- From: openh323gk-users-admin@lists.sourceforge.net [mailto:openh323gk-users-admin@lists.sourceforge.net]On Behalf Of Zygmuntowicz Michal Sent: Sunday, September 21, 2003 1:01 PM To: openh323gk-users@lists.sourceforge.net Subject: Re: multiple definitions linker error when building 2.0.5 No H.323 endpoint that is not registered with GK will send ARQ ever (RRQ or anything else). If you send signalling from cisco router to GK address, then you will have a chance to authenitcate calls through Q.931 Setup authentication modules. Currently, only RadAliasAuth implements Setup authentication. ----- Original Message ----- From: "Oleg Ustinov" <Oleg.Ustinov@nectis.com> Sent: Sunday, September 21, 2003 12:35 PM > Is Auth for unregistered endpoints works in Routed mode only? > my problem - I have endpoint CISCO router (originating call) but wish not to > register on the Gatekeeper. > I specified it as PermanentEndPoint and give as terminal (no prefixes) but > it's not help. > I see no ARQ and its Alias in the current call infos... ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
