----- Original Message -----
Sent: Monday, July 28, 2003 6:00
PM
Subject: Re: [Openh323gk-users] CISCO
gateways and GNUGK
Ok let me be a little more
clear:
caller -> gateway a ->(voip
peer) GK --> (xxx pots peer )gateway b ->
caller
Without registration how does gateway "a" get
to gateway "b" though the GK? What does the "VOIP" dial peer look
like on gateway "a"
Here is our VOIP dial peer from gateway
"a":
dial-peer voice 3232
voip
destination-pattern 3232
progress_ind setup enable
3
progress_ind alert enable 8
voice-class codec
1
voice-class h323 1
session target
ipv4:172.25.96.100
no
vad
Where the session target is the
gatekeeper. This dial-peer does not work with the GK.
Thanks
----- Original Message -----
Sent: Monday, July 28, 2003 4:40
PM
Subject: Re: [Openh323gk-users]
CISCO gateways and GNUGK
Hi,
the XXXX peer is like
this
dial-peer voice XXXX pots
destination-pattern
XXXXXXXXT
direct-inward-dial
port
3/0:D
prefix 07
!
This is the LOG from Cisco
AS5350:
D9E : 54934784hs.487340 +-1 +8 pid:XXXXX
Originate XXXXXXXXXXXXXX
dur 00:00:00 tx:0/0 rx:0/0 65 (message in
incomp call state (101)) IP 0.0.0.0:0 rtt:0ms pl:0/0ms lost:0/0/0
delay:0/0/0ms g729r8 pre-ietf
Thankx and rgds,
Hemant
----- Original Message -----
Sent: Tuesday, July 29, 2003 1:43
AM
Subject: Re: [Openh323gk-users]
CISCO gateways and GNUGK
Can we see your voip dial
peer?
Thanks
----- Original Message -----
Sent: Monday, July 28, 2003
4:04 PM
Subject: RE: [Openh323gk-users]
CISCO gateways and GNUGK
this gw that generate calls...
interface FastEthernet0
ip
address xxx.xxx.xxx.xxx 255.255.255.248
no ip
route-cache
no ip mroute-cache
duplex
auto
speed auto
h323-gateway voip
interface
h323-gateway voip id gk-01
ipaddr xxx.xxx.xxx.xxx 1719 -> ip del
gatekeeper.
h323-gateway voip h323-id voip-gw-02
h323-gateway voip tech-prefix 88#
This is my GW configuration, this is the
GW to terminate calls
IMAGE: c5300-is-mz.122-6.bin
interface
FastEthernet0
ip address 192.168.0.10 255.255.255.0
no ip
mroute-cache
duplex half
speed 10
no
cdp enable
h323-gateway voip
interface
h323-gateway voip id gk-01 ipaddr [put here ip-gatekeeper]
1719
h323-gateway voip h323-id voip-gw-03
h323-gateway voip
tech-prefix 78#
h323-gateway voip tech-prefix
60#
dial-peer voice 89
pots
destination-pattern
78#T
direct-inward-dial
port 2:D
dial-peer voice 90
pots
destination-pattern
60#T
direct-inward-dial
port 0:0
this is my Gatekeeper configuration
file.
[Gatekeeper::Main]
Fourtytwo=42
Name=gk-01
Home=put here ip-listening
TimeToLive=600
[RoutedMode]
GKRouted=1
H245Routed=1
[RasSrv::PermanentEndpoints]
xxx.xxx.xxx.xxx=voip-gw-02;88#
192.168.0.10=voip-gw-03;78#,60#
Maybe Sebastian could post his
As5300 config and ini settings for the GK. Could you also
let us what version of Cisco IOS you are using.
Thanks!
----- Original Message -----
Sent: Monday, July 28,
2003 1:53 PM
Subject: Re:
[Openh323gk-users] CISCO gateways and GNUGK
i was taling about AS5350 not
AS5300.
Thankx
----- Original Message -----
Sent: Monday, July 28,
2003 10:57 PM
Subject: RE:
[Openh323gk-users] CISCO gateways and GNUGK
I have AS5300 in both sides and I have
not problems with GNUGK... I use it in Routed
mode.
Hello,
I am having problem with
CiscoAS5300, i think there are some compatibility issues.
Thankx,
Hemant
----- Original Message
-----
Sent: Monday, July
28, 2003 8:44 PM
Subject:
[Openh323gk-users] CISCO gateways and GNUGK
Does the GNUGK except inbound traffic from Cisco
gateways? VG200, AS5300 and AS5350. I saw
the compatiblity list but we are unable to get this to
work with traffic coming from a gateway. Does
anyone have this working?
We have it working with terminals and outbound
trafic to the gateways works fine too. It the
inbound from the gateway to the GK that is the
problem.
user -> gateway -> gatekeeper -> gateway
-> user
Please post your ini and dial-
peers
We are not having the gateways register with
GNUGK.
