|
This
is my GW configuration, this is the GW to terminate calls
IMAGE:
c5300-is-mz.122-6.bin
interface FastEthernet0
ip
address 192.168.0.10
255.255.255.0
no ip
mroute-cache
duplex half
speed 10
no cdp
enable
h323-gateway voip interface
h323-gateway voip id gk-01
ipaddr [put here ip-gatekeeper] 1719
h323-gateway voip
h323-id voip-gw-03
h323-gateway voip tech-prefix
78#
h323-gateway voip tech-prefix 60#
dial-peer voice 89
pots
destination-pattern 78#T
direct-inward-dial
port
2:D
dial-peer voice 90
pots
destination-pattern 60#T
direct-inward-dial
port
0:0
this
is my Gatekeeper configuration file.
[Gatekeeper::Main]
Fourtytwo=42
Name=gk-01
Home=put here ip-listening
TimeToLive=600
[RoutedMode]
GKRouted=1
H245Routed=1
[RasSrv::PermanentEndpoints]
xxx.xxx.xxx.xxx=voip-gw-02;88#
192.168.0.10=voip-gw-03;78#,60#
Maybe Sebastian could post his As5300 config and
ini settings for the GK. Could you also let us what version of Cisco IOS
you are using.
Thanks!
----- Original Message -----
Sent: Monday, July 28, 2003 1:53
PM
Subject: Re: [Openh323gk-users] CISCO
gateways and GNUGK
i was taling about AS5350 not AS5300.
Thankx
----- Original Message -----
Sent: Monday, July 28, 2003 10:57
PM
Subject: RE: [Openh323gk-users] CISCO
gateways and GNUGK
I have AS5300 in both sides and I have not problems with GNUGK... I
use it in Routed mode.
Hello,
I am having problem with CiscoAS5300, i
think there are some compatibility issues.
Thankx,
Hemant
----- Original Message -----
Sent: Monday, July 28, 2003 8:44
PM
Subject: [Openh323gk-users] CISCO
gateways and GNUGK
Does the
GNUGK except inbound traffic from Cisco gateways? VG200, AS5300
and AS5350. I saw the compatiblity list but we are unable to get
this to work with traffic coming from a gateway. Does anyone
have this working?
We have it
working with terminals and outbound trafic to the gateways works fine
too. It the inbound from the gateway to the GK that is the
problem.
user ->
gateway -> gatekeeper -> gateway -> user
Please
post your ini and dial- peers
We are not
having the gateways register with GNUGK.
| 