----- Original Message -----
Sent: Thursday, July 24, 2003 7:24
PM
Subject: [Openh323gk-users] Cisco and
GNUGK
Ok we have the
GNUGK working with terminal endpoints no problem. However what if we
want to turn it around and have a call from the pstn call into a gateway and
the gateway connect to the GK and the GK forward the call to either another
gateway or a terminal we cant seem to get this working. The gateway
complains that there is no route to host. I have verified connectivity.
Can the GNUGK connect two gateways? If so will someone please post their
ini with this config. So here is what we are looking to
do:
caller-->
gateway(VG200) -> gatekeeper -> gateway(AS5300) ->
caller
By the way this
config works fine if I take the GK out of the mix and point my VG200 dialpeer
to the AS5300.
here is what
our ini looks like:
[Gatekeeper::Main]
Fourtytwo=42
Name=winGK1
StatusPort=7000
;Home=172.25.49.8
;RedirectGK=Endpoints > 100 || Calls >
50
;AlternateGKs=172.25.51.12:1719:false:10:windersGK
;SendTo=172.25.51.12:1719
;SkipForwards=172.25.51.12
[GkStatus::Auth]
rule=allow
[Routed
Mode]
GKRouted=1
H245Routed=1
AcceptUnregisteredEndpoints=1
;CallSignalPort=1721
;RemoveH245AddressOnTunneling=1
[RasSrv::GWPrefixes]
;vg200=859
;copperpri=513
;AS5300=3232
[RasSrv::PermanentEndpoints]
172.25.96.6=vg200;859
172.25.96.5=copperpri;513
;172.25.96.13=AS5300;3232
[RasSrv::LRQFeatures]
CiscoGKCompatible=1
[Endpoint]
;Type=Gateway
the cisco config
is just a dial-peer because we will be unable to have the remote gateways all
register to the GK
dial-peer voice
3232 voip
destination-pattern 3232
progress_ind setup enable
3
progress_ind alert enable 8
voice-class codec
1
voice-class h323 1
session target
ipv4:172.25.49.8
dtmf-relay h245-alphanumeric
no
vad
