Hi,
I'm new to this list. I searched the archive, but I did not found any message that could be helpful for me.
Here is my problem...
I set up an MCU and a gatekeeper on a distant site, and I trie to hold a videoconference like this:
-----------
|GK1 + MCU|
-----------
|
------------+------------
|
| Internet
|
------------+------------
| LAN
------
| FW |
------
|
-------
| GK2 | as proxy
-------
/\
/ \
--- ---
|1| |2|
--- ---
1 and 2 are both H.323 terminals
I configured GK2 as an endpoint, child of GK1.
1 and 2 can both connect with the MCU, but can't see any image. It seems like video data is actualy received. Here is Gnomemeeting's logfile :
17:50:09 Calling test
17:50:13 Gatekeeper set to OpenH323GK@192.168.1.41
17:50:13 Started New Logical Channel...
17:50:13 Sending SpeexNarrow-8k{sw}
17:50:13 Enabled silence detection for SpeexNarrow-8k{sw}
17:50:13 Opening Video device
17:50:13 Started New Logical Channel...
17:50:13 Sending H.261-QCIF
17:50:13 Fast start disabled
17:50:13 H.245 Tunnelling enabled
17:50:13 Connected with test using OpenH323 Project OpenMCU 1.1.7
17:50:13 Started New Logical Channel...
17:50:13 Receiving SpeexNarrow-8k{sw}
17:50:13 Started New Logical Channel...
17:50:13 Receiving H.261-CIF
17:50:13 Requesting remote to send video quality: 70%
17:50:15 Request ok
Netmeeting doesn't give better results.
Any ideas?
Martin
-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner.
Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission!
INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
