Hello FeFe, the fxo -- Best regards, Danny mailto:dannyz@belgonet.com belGOnet.com a Euro-pictures division - internet solutions place princesse elisabeth 9/11 - 1030 Brussels - Belgium Tel : +32-(0)2-215.67.65 - Fax : +32-(0)2-215.66.65 Tuesday, June 24, 2003, 6:42:16 PM, you wrote: >> Hello FeFe, >> >>>>> >>>>> 2 - In the cdrfile I have not the phone number I composed. I have only >>>>> the >>>>> prefix I compose to go to the gateway: the number to go after the >>>>> gateway >>>>> (the phone number) is not loaded. Is it possible to save this number? >>>> >>>> IMHO, that is wrong. The called numbe can be seen in the CDR record. >> >> i know the trouble you are having.. the called number can't be seen in >> the CDR if you are using a gateway that gives a dialtone afterwards >> (non cisco stuff); you should reconfigure your gateway to NOT allow to >> give a dialtone at the end, >> >> so eg. >> >> your gateway is 777 >> >> when the user dials 7770504060795 it will only show 777 in the CDR. >> >> FA> I reconfigure the FXO or the FXS? FA> guillaume ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
