Re[2]: [Openh323gk-users] How to complete the CDR file?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello FeFe,

>>>
>>> 2 - In the cdrfile I have not the phone number I composed. I have only 
>>> the
>>> prefix I compose to go to the gateway: the number to go after the 
>>> gateway
>>> (the phone number) is not loaded. Is it possible to save this number?
>>
>> IMHO, that is wrong. The called numbe can be seen in the CDR record.

i know the trouble you are having.. the called number can't be seen in
the CDR if you are using a gateway that gives a dialtone afterwards
(non cisco stuff); you should reconfigure your gateway to NOT allow to
give a dialtone at the end,

so eg.

your gateway is 777

when the user dials 7770504060795 it will only show 777 in the CDR.



-- 
Best regards,
 Danny                            mailto:dannyz@belgonet.com

belGOnet.com    a Euro-pictures division - internet solutions
place princesse elisabeth 9/11   -   1030 Brussels  - Belgium
Tel : +32-(0)2-215.67.65      -      Fax : +32-(0)2-215.66.65



-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner.
Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission!
INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux