Hello On Fri, 2008-01-25 at 07:33 -0500, Dan Williams wrote:> On Fri, 2008-01-25 at 10:46 +0530, ritz wrote:> > Hello> > > > On Tue, 2008-01-22 at 18:37 +0000, Paulo J. Matos wrote:> > > On Jan 20, 2008 12:15 AM, George Vlahavas <vlahavas@xxxxxxxxx> wrote:> > > > 2008/1/19, MHR <mhullrich@xxxxxxxxx>:> > > >> > > > > On Jan 19, 2008 11:50 AM, Paulo J. Matos <pocm@xxxxxxxxxxx> wrote:> > > > > >> > > > > > On Jan 17, 2008 9:59 PM, Paulo J. Matos <pocm@xxxxxxxxxxx > wrote:> > > > > > > Hello all,> > > > > > >> > > > > > > In gnome 2.20, I've always had hotplug working. Each time I plug my> > > > > > > external HD, it gets mounted, or my camera, or mp3 player or whatever,> > > > > > > but for a couple of days, I plug in something and nothing happens.> > > > > > > Is there a way to debug what's going wrong?> > > > > > >> > > > > >> > > > > > I wonder why nobody replies...> > > > > >> > > > > This is probably an OS problem (automount failure) - what OS are you> > > > > running?> > > > Or it could be some hal rule that got installed by another package> > > > that prevents automounting. I've seen that happen with the gparted> > > > package in some distros for example.> > > > > > Can it be some problem with NetworkManager?> > > > > > I'm getting this in the system logs when I attach something:> > > > > > Jan 22 18:36:03 euler usb 5-1: new high speed USB device using> > > ehci_hcd and address 8> > > Jan 22 18:36:04 euler usb 5-1: configuration #1 chosen from 1 choice> > > Jan 22 18:36:04 euler hub 5-1:1.0: USB hub found> > > Jan 22 18:36:04 euler hub 5-1:1.0: 4 ports detected> > > Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.031222]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial').> > > Jan 22 18:36:04 euler hub 1-0:1.0: over-current change on port 2> > > Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.232276]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial_if0').> > > Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.316900]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial_usbraw').> > > Jan 22 18:36:04 euler usb 5-1.2: new high speed USB device using> > > ehci_hcd and address 9> > > Jan 22 18:36:04 euler usb 5-1.2: configuration #1 chosen from 1 choice> > > Jan 22 18:36:04 euler scsi5 : SCSI emulation for USB Mass Storage devices> > > Jan 22 18:36:04 euler usb-storage: device found at 9> > > Jan 22 18:36:04 euler usb-storage: waiting for device to settle before scanning> > > Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.522854]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7').> > > Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.667640]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0').> > > Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.716621]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_usbraw').> > > Jan 22 18:36:08 euler usb 1-2: new full speed USB device using> > > uhci_hcd and address 5> > > Jan 22 18:36:08 euler usb 1-2: not running at top speed; connect to a> > > high speed hub> > > Jan 22 18:36:08 euler usb 1-2: configuration #1 chosen from 1 choice> > > Jan 22 18:36:08 euler scsi6 : SCSI emulation for USB Mass Storage devices> > > Jan 22 18:36:08 euler usb-storage: device found at 5> > > Jan 22 18:36:08 euler usb-storage: waiting for device to settle before scanning> > > Jan 22 18:36:08 euler NetworkManager: <debug> [1201026968.973308]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1').> > > Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.140181]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0').> > > Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.234992]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_usbraw').> > > Jan 22 18:36:09 euler scsi 5:0:0:0: Direct-Access Kingston> > > DataTraveler 2.0 6.50 PQ: 0 ANSI: 0 CCS> > > Jan 22 18:36:09 euler SCSI device sda: 1970175 512-byte hdwr sectors (1009 MB)> > > Jan 22 18:36:09 euler sda: Write Protect is off> > > Jan 22 18:36:09 euler sda: Mode Sense: 45 00 00 08> > > Jan 22 18:36:09 euler sda: assuming drive cache: write through> > > Jan 22 18:36:09 euler SCSI device sda: 1970175 512-byte hdwr sectors (1009 MB)> > > Jan 22 18:36:09 euler sda: Write Protect is off> > > Jan 22 18:36:09 euler sda: Mode Sense: 45 00 00 08> > > Jan 22 18:36:09 euler sda: assuming drive cache: write through> > > Jan 22 18:36:09 euler sda: sda1> > > Jan 22 18:36:09 euler sd 5:0:0:0: Attached scsi removable disk sda> > > Jan 22 18:36:09 euler sd 5:0:0:0: Attached scsi generic sg0 type 0> > > Jan 22 18:36:09 euler usb-storage: device scan complete> > > Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.563906]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host').> > > Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.570017]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host_scsi_device_lun0').> > > Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.575826]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host_scsi_device_lun0_scsi_generic').> > > Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.727791]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/storage_serial_Kingston_DataTraveler_2_0_0F714B6150C388C7_0_0').> > > Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.795003]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/volume_uuid_d7720317_54c4_4ce6_b07d_fb985a5bab46').> > > Jan 22 18:36:13 euler scsi 6:0:0:0: Direct-Access WDC WD12> > > 00UE-00KVT0 0000 PQ: 0 ANSI: 0> > > Jan 22 18:36:13 euler SCSI device sdb: 234441648 512-byte hdwr sectors> > > (120034 MB)> > > Jan 22 18:36:13 euler sdb: Write Protect is off> > > Jan 22 18:36:13 euler sdb: Mode Sense: 27 00 00 00> > > Jan 22 18:36:13 euler sdb: assuming drive cache: write through> > > Jan 22 18:36:13 euler SCSI device sdb: 234441648 512-byte hdwr sectors> > > (120034 MB)> > > Jan 22 18:36:13 euler sdb: Write Protect is off> > > Jan 22 18:36:13 euler sdb: Mode Sense: 27 00 00 00> > > Jan 22 18:36:13 euler sdb: assuming drive cache: write through> > > Jan 22 18:36:13 euler sdb: sdb1> > > Jan 22 18:36:13 euler sd 6:0:0:0: Attached scsi disk sdb> > > Jan 22 18:36:13 euler sd 6:0:0:0: Attached scsi generic sg1 type 0> > > Jan 22 18:36:13 euler usb-storage: device scan complete> > > Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.019744]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host').> > > Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.025084]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host_scsi_device_lun0').> > > Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.160125]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/storage_serial_WDC_WD12_00UE_00KVT0_DEF103C306F1_0_0').> > > Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.168327]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host_scsi_device_lun0_scsi_generic').> > > Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.548287]> > > nm_hal_device_added(): New device added (hal udi is> > > '/org/freedesktop/Hal/devices/volume_uuid_8b15f11e_1008_4964_bc2f_4b5b3029d19f').> > > > > > > Looks rather odd to me. Which distro are you using ?> > Does disabling nm help ?Additionally, i would suggest you to try monitoring system and sessionbus. $ man 1 dbus-monitor > > NM shouldn't actually touch anything that's not a network device, even> though it will log the insert. So it'll show up here but NM will just> ignore it unless it has HAL network device properties.Nice. I was not aware of this. > > Dan> > -- Ritesh Khadgarayॐ मणि पद्मे हूँDesktop LinuX N StuffPh: +919970164885Eat Right, Exercise, Die Anyway.Fedora is the best of what works today. Enterprise Linux is the best ofwhat will work consistently for the next seven years. _______________________________________________gnome-list mailing listgnome-list@xxxxxxxxxxxxx://mail.gnome.org/mailman/listinfo/gnome-list
