Hello On Tue, 2008-01-22 at 18:37 +0000, Paulo J. Matos wrote:> On Jan 20, 2008 12:15 AM, George Vlahavas <vlahavas@xxxxxxxxx> wrote:> > 2008/1/19, MHR <mhullrich@xxxxxxxxx>:> >> > > On Jan 19, 2008 11:50 AM, Paulo J. Matos <pocm@xxxxxxxxxxx> wrote:> > > >> > > > On Jan 17, 2008 9:59 PM, Paulo J. Matos <pocm@xxxxxxxxxxx > wrote:> > > > > Hello all,> > > > >> > > > > In gnome 2.20, I've always had hotplug working. Each time I plug my> > > > > external HD, it gets mounted, or my camera, or mp3 player or whatever,> > > > > but for a couple of days, I plug in something and nothing happens.> > > > > Is there a way to debug what's going wrong?> > > > >> > > >> > > > I wonder why nobody replies...> > > >> > > This is probably an OS problem (automount failure) - what OS are you> > > running?> > Or it could be some hal rule that got installed by another package> > that prevents automounting. I've seen that happen with the gparted> > package in some distros for example.> > Can it be some problem with NetworkManager?> > I'm getting this in the system logs when I attach something:> > Jan 22 18:36:03 euler usb 5-1: new high speed USB device using> ehci_hcd and address 8> Jan 22 18:36:04 euler usb 5-1: configuration #1 chosen from 1 choice> Jan 22 18:36:04 euler hub 5-1:1.0: USB hub found> Jan 22 18:36:04 euler hub 5-1:1.0: 4 ports detected> Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.031222]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial').> Jan 22 18:36:04 euler hub 1-0:1.0: over-current change on port 2> Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.232276]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial_if0').> Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.316900]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial_usbraw').> Jan 22 18:36:04 euler usb 5-1.2: new high speed USB device using> ehci_hcd and address 9> Jan 22 18:36:04 euler usb 5-1.2: configuration #1 chosen from 1 choice> Jan 22 18:36:04 euler scsi5 : SCSI emulation for USB Mass Storage devices> Jan 22 18:36:04 euler usb-storage: device found at 9> Jan 22 18:36:04 euler usb-storage: waiting for device to settle before scanning> Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.522854]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7').> Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.667640]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0').> Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.716621]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_usbraw').> Jan 22 18:36:08 euler usb 1-2: new full speed USB device using> uhci_hcd and address 5> Jan 22 18:36:08 euler usb 1-2: not running at top speed; connect to a> high speed hub> Jan 22 18:36:08 euler usb 1-2: configuration #1 chosen from 1 choice> Jan 22 18:36:08 euler scsi6 : SCSI emulation for USB Mass Storage devices> Jan 22 18:36:08 euler usb-storage: device found at 5> Jan 22 18:36:08 euler usb-storage: waiting for device to settle before scanning> Jan 22 18:36:08 euler NetworkManager: <debug> [1201026968.973308]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1').> Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.140181]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0').> Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.234992]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_usbraw').> Jan 22 18:36:09 euler scsi 5:0:0:0: Direct-Access Kingston> DataTraveler 2.0 6.50 PQ: 0 ANSI: 0 CCS> Jan 22 18:36:09 euler SCSI device sda: 1970175 512-byte hdwr sectors (1009 MB)> Jan 22 18:36:09 euler sda: Write Protect is off> Jan 22 18:36:09 euler sda: Mode Sense: 45 00 00 08> Jan 22 18:36:09 euler sda: assuming drive cache: write through> Jan 22 18:36:09 euler SCSI device sda: 1970175 512-byte hdwr sectors (1009 MB)> Jan 22 18:36:09 euler sda: Write Protect is off> Jan 22 18:36:09 euler sda: Mode Sense: 45 00 00 08> Jan 22 18:36:09 euler sda: assuming drive cache: write through> Jan 22 18:36:09 euler sda: sda1> Jan 22 18:36:09 euler sd 5:0:0:0: Attached scsi removable disk sda> Jan 22 18:36:09 euler sd 5:0:0:0: Attached scsi generic sg0 type 0> Jan 22 18:36:09 euler usb-storage: device scan complete> Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.563906]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host').> Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.570017]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host_scsi_device_lun0').> Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.575826]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host_scsi_device_lun0_scsi_generic').> Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.727791]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/storage_serial_Kingston_DataTraveler_2_0_0F714B6150C388C7_0_0').> Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.795003]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/volume_uuid_d7720317_54c4_4ce6_b07d_fb985a5bab46').> Jan 22 18:36:13 euler scsi 6:0:0:0: Direct-Access WDC WD12> 00UE-00KVT0 0000 PQ: 0 ANSI: 0> Jan 22 18:36:13 euler SCSI device sdb: 234441648 512-byte hdwr sectors> (120034 MB)> Jan 22 18:36:13 euler sdb: Write Protect is off> Jan 22 18:36:13 euler sdb: Mode Sense: 27 00 00 00> Jan 22 18:36:13 euler sdb: assuming drive cache: write through> Jan 22 18:36:13 euler SCSI device sdb: 234441648 512-byte hdwr sectors> (120034 MB)> Jan 22 18:36:13 euler sdb: Write Protect is off> Jan 22 18:36:13 euler sdb: Mode Sense: 27 00 00 00> Jan 22 18:36:13 euler sdb: assuming drive cache: write through> Jan 22 18:36:13 euler sdb: sdb1> Jan 22 18:36:13 euler sd 6:0:0:0: Attached scsi disk sdb> Jan 22 18:36:13 euler sd 6:0:0:0: Attached scsi generic sg1 type 0> Jan 22 18:36:13 euler usb-storage: device scan complete> Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.019744]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host').> Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.025084]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host_scsi_device_lun0').> Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.160125]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/storage_serial_WDC_WD12_00UE_00KVT0_DEF103C306F1_0_0').> Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.168327]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host_scsi_device_lun0_scsi_generic').> Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.548287]> nm_hal_device_added(): New device added (hal udi is> '/org/freedesktop/Hal/devices/volume_uuid_8b15f11e_1008_4964_bc2f_4b5b3029d19f').> Looks rather odd to me. Which distro are you using ?Does disabling nm help ? ps: added networkmanager-list to cc. -- Ritesh Khadgarayॐ मणि पद्मे हूँDesktop LinuX N StuffPh: +919970164885Eat Right, Exercise, Die Anyway.Fedora is the best of what works today. Enterprise Linux is the best ofwhat will work consistently for the next seven years. _______________________________________________gnome-list mailing listgnome-list@xxxxxxxxxxxxx://mail.gnome.org/mailman/listinfo/gnome-list
