Re: Conv distr-repl 2 to repl 3 arb 1 now 2 of 6 arb bricks won't get healed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hm,

I tried format and reset-brick on node2 - no success.
I tried new brick on new node3 and replace-brick - no success as the new arbiter is created wrongly and self-heal does not work.

I also restarted all nodes turn by turn without any improvement. 

If shrinking the volume is not recommended, converting it back to replica 2 possible and if successful.another try?

Thanks
A.



31.05.2021 21:03:01 Strahil Nikolov <hunter86_bg@xxxxxxxxx>:

> I would avoid shrinking the volume. An oVirt user reported issues after volume shrinking.
> 
> Did you try to format the arbiter brick and 'replace-brick' ?
> 
> Best Regards,
> Strahil Nikolov
>> 
>> I can't find anything suspicious in the brick logs other than authetication refused to clients trying to mount a dir that is not existing on the arb_n, because the self-heal isn't working.
>> I tried to add another node and replace-brick a faulty arbiter, however this new arbiter sees the same error.
>> 
>> Last idea is to completely remove first subvolume, then re-add as new hoping it will work.
>> 
>> 
>> A.
>> 
>> 
>> "a.schwibbe@xxxxxxx" a.schwibbe@xxxxxxx – 31. Mai 2021 13:44
>>> Ok, will do.
>>>
>>>
>>> working arbiter:
>>>
>>> ls -ln /var/bricks/arb_0/ >>> drwxr-xr-x 13 33 33 146 Mai 29 22:38 brick
>>>
>>> ls- lna /var/bricks/arb_0/brick >>> drw------- 262 0 0 8192 Mai 29 22:38 .glusterfs
>>> + all data-brick dirs ...
>>>
>>>
>>> affected arbiter:
>>>
>>> ls -ln /var/bricks/arb_0/ >>> drwxr-xr-x 3 0 0 24 Mai 30 16:23 brick
>>> ls -lna /var/bricks/arb_0/brick >>> drw------- 7 0 0 99 Mai 30 16:23 .glusterfs
>>> nothing else here
>>>
>>>
>>> find /var/bricks/arb_0/brick -not -user 33 -print
>>>
>>> /var/bricks/arb_0/brick/.glusterfs
>>> /var/bricks/arb_0/brick/.glusterfs/indices
>>> /var/bricks/arb_0/brick/.glusterfs/indices/xattrop
>>> /var/bricks/arb_0/brick/.glusterfs/indices/dirty
>>> /var/bricks/arb_0/brick/.glusterfs/indices/entry-changes
>>> /var/bricks/arb_0/brick/.glusterfs/changelogs
>>> /var/bricks/arb_0/brick/.glusterfs/changelogs/htime
>>> /var/bricks/arb_0/brick/.glusterfs/changelogs/csnap
>>> /var/bricks/arb_0/brick/.glusterfs/00
>>> /var/bricks/arb_0/brick/.glusterfs/00/00
>>> /var/bricks/arb_0/brick/.glusterfs/00/00/00000000-0000-0000-0000-000000000001
>>> /var/bricks/arb_0/brick/.glusterfs/landfill
>>> /var/bricks/arb_0/brick/.glusterfs/unlink
>>> /var/bricks/arb_0/brick/.glusterfs/health_check
>>>
>>> find /var/bricks/arb_0/brick -not -user 33 -print
>>>
>>> /var/bricks/arb_0/brick/.glusterfs
>>> /var/bricks/arb_0/brick/.glusterfs/indices
>>> /var/bricks/arb_0/brick/.glusterfs/indices/xattrop
>>> /var/bricks/arb_0/brick/.glusterfs/indices/dirty
>>> /var/bricks/arb_0/brick/.glusterfs/indices/entry-changes
>>> /var/bricks/arb_0/brick/.glusterfs/changelogs
>>> /var/bricks/arb_0/brick/.glusterfs/changelogs/htime
>>> /var/bricks/arb_0/brick/.glusterfs/changelogs/csnap
>>> /var/bricks/arb_0/brick/.glusterfs/00
>>> /var/bricks/arb_0/brick/.glusterfs/00/00
>>> /var/bricks/arb_0/brick/.glusterfs/00/00/00000000-0000-0000-0000-000000000001
>>> /var/bricks/arb_0/brick/.glusterfs/landfill
>>> /var/bricks/arb_0/brick/.glusterfs/unlink
>>> /var/bricks/arb_0/brick/.glusterfs/health_check
>>>
>>> Output is identical to user:group 36 as all these have UID:GID 0:0, but these files have 0:0 also on the working arbiters.
>>> And this is all files/dirs that exist on the affected arbs. Nothing more on it. There should be much more, but this seems to missing self heal.
>>>
>>> Thanks.
>>>
>>> A.
>>>
>>>
>>> "Strahil Nikolov" hunter86_bg@xxxxxxxxx – 31. Mai 2021 13:11
>>> > Hi,
>>> >
>>> > I think that the best way is to go through the logs on the affected arbiter brick (maybe even temporarily increase the log level).
>>> >
>>> > What is the output of:
>>> >
>>> > find /var/brick/arb_0/brick -not -user 36 -print
>>> > find /var/brick/arb_0/brick -not group 36 -print
>>> >
>>> > Maybe there are some files/dirs that are with wrong ownership.
>>> >
>>> > Best Regards,
>>> > Strahil Nikolov
>>> >
>>> > >
>>> > > Thanks Strahil,
>>> > >
>>> > > unfortunately I cannot connect as the mount is denied as in mount.log provided.
>>> > > IPs > n.n.n..100 are clients and simply cannot mount the volume. When killing the arb pids on node2 new clients can mount the volume. When bringing them up again I experience the same problem.
>>> > >
>>> > > I wonder why the root dir on the arb bricks has wrong UID:GID.
>>> > > I added regular data bricks before without any problems on node2.
>>> > >
>>> > > Also when executing "watch df"
>>> > >
>>> > > I see
>>> > >
>>> > > /dev/md50 11700224 33108 11667116 1% /var/bricks/arb_0
>>> > > ..
>>> > >
>>> > > /dev/md50 11700224 33128 11667096 1% /var/bricks/arb_0
>>> > >
>>> > > ..
>>> > >
>>> > > /dev/md50 11700224 33108 11667116 1% /var/bricks/arb_0
>>> > >
>>> > > So heal daemon might try to do something, which isn't working. Thus I chowned UID:GID of ../arb_0/brick manually to match, but it did not work either.
>>> > >
>>> > > As I added all 6 arbs at once and 4 are working as expected I really don't get what's wrong with these...
>>> > >
>>> > > A.
>>> > >
>>> > > "Strahil Nikolov" hunter86_bg@xxxxxxxxx – 31. Mai 2021 11:12
>>> > > > For the arb_0 I seeonly 8 clients , while there should be 12 clients:
>>> > > > Brick : 192.168.0.40:/var/bricks/0/brick
>>> > > > Clients connected : 12
>>> > > >
>>> > > > Brick : 192.168.0.41:/var/bricks/0/brick
>>> > > > Clients connected : 12
>>> > > >
>>> > > > Brick : 192.168.0.80:/var/bricks/arb_0/brick
>>> > > > Clients connected : 8
>>> > > >
>>> > > > Can you try to reconnect them. The most simple way is to kill the arbiter process and 'gluster volume start force' , but always verify that you have both data bricks up and running.
>>> > > >
>>> > > >
>>> > > >
>>> > > > Yet, this doesn't explain why the heal daemon is not able to replicate properly.
>>> > > >
>>> > > >
>>> > > >
>>> > > > Best Regards,
>>> > > > Strahil Nikolov
>>> > > > >
>>> > > > > Meanwhile I tried reset-brick on one of the failing arbiters on node2, but with same results. The behaviour is reproducible, arbiter stays empty.
>>> > > > >
>>> > > > > node0: 192.168.0.40
>>> > > > >
>>> > > > > node1: 192.168.0.41
>>> > > > >
>>> > > > > node3: 192.168.0.80
>>> > > > >
>>> > > > > volume info:
>>> > > > >
>>> > > > > Volume Name: gv0
>>> > > > > Type: Distributed-Replicate
>>> > > > > Volume ID: 9bafc4d2-d9b6-4b6d-a631-1cf42d1d2559
>>> > > > > Status: Started
>>> > > > > Snapshot Count: 0
>>> > > > > Number of Bricks: 6 x (2 + 1) = 18
>>> > > > > Transport-type: tcp
>>> > > > > Bricks:
>>> > > > > Brick1: 192.168.0.40:/var/bricks/0/brick
>>> > > > > Brick2: 192.168.0.41:/var/bricks/0/brick
>>> > > > > Brick3: 192.168.0.80:/var/bricks/arb_0/brick (arbiter)
>>> > > > > Brick4: 192.168.0.40:/var/bricks/2/brick
>>> > > > > Brick5: 192.168.0.80:/var/bricks/2/brick
>>> > > > > Brick6: 192.168.0.41:/var/bricks/arb_1/brick (arbiter)
>>> > > > > Brick7: 192.168.0.40:/var/bricks/1/brick
>>> > > > > Brick8: 192.168.0.41:/var/bricks/1/brick
>>> > > > > Brick9: 192.168.0.80:/var/bricks/arb_1/brick (arbiter)
>>> > > > > Brick10: 192.168.0.40:/var/bricks/3/brick
>>> > > > > Brick11: 192.168.0.80:/var/bricks/3/brick
>>> > > > > Brick12: 192.168.0.41:/var/bricks/arb_0/brick (arbiter)
>>> > > > > Brick13: 192.168.0.41:/var/bricks/3/brick
>>> > > > > Brick14: 192.168.0.80:/var/bricks/4/brick
>>> > > > > Brick15: 192.168.0.40:/var/bricks/arb_0/brick (arbiter)
>>> > > > > Brick16: 192.168.0.41:/var/bricks/2/brick
>>> > > > > Brick17: 192.168.0.80:/var/bricks/5/brick
>>> > > > > Brick18: 192.168.0.40:/var/bricks/arb_1/brick (arbiter)
>>> > > > > Options Reconfigured:
>>> > > > > cluster.min-free-inodes: 6%
>>> > > > > cluster.min-free-disk: 2%
>>> > > > > performance.md-cache-timeout: 600
>>> > > > > cluster.rebal-throttle: lazy
>>> > > > > features.scrub-freq: monthly
>>> > > > > features.scrub-throttle: lazy
>>> > > > > features.scrub: Inactive
>>> > > > > features.bitrot: off
>>> > > > > cluster.server-quorum-type: none
>>> > > > > performance.cache-refresh-timeout: 10
>>> > > > > performance.cache-max-file-size: 64MB
>>> > > > > performance.cache-size: 781901824
>>> > > > > auth.allow: /(192.168.0.*),/usr/andreas(192.168.0.120),/usr/otis(192.168.0.168),/usr/otis(192.168.0.111),/usr/otis(192.168.0.249),/media(192.168.0.*),/virt(192.168.0.*),/cloud(192.168.0.247),/zm(192.168.0.136)
>>> > > > > performance.cache-invalidation: on
>>> > > > > performance.stat-prefetch: on
>>> > > > > features.cache-invalidation-timeout: 600
>>> > > > > cluster.quorum-type: auto
>>> > > > > features.cache-invalidation: on
>>> > > > > nfs.disable: on
>>> > > > > transport.address-family: inet
>>> > > > > cluster.self-heal-daemon: on
>>> > > > > cluster.server-quorum-ratio: 51%
>>> > > > >
>>> > > > > volume status:
>>> > > > >
>>> > > > > Status of volume: gv0
>>> > > > > Gluster process TCP Port RDMA Port Online Pid
>>> > > > > ------------------------------------------------------------------------------
>>> > > > > Brick 192.168.0.40:/var/bricks/0/brick 49155 0 Y 713066
>>> > > > > Brick 192.168.0.41:/var/bricks/0/brick 49152 0 Y 2082
>>> > > > > Brick 192.168.0.80:/var/bricks/arb_0/brick 49152 0 Y 26186
>>> > > > > Brick 192.168.0.40:/var/bricks/2/brick 49156 0 Y 713075
>>> > > > > Brick 192.168.0.80:/var/bricks/2/brick 49154 0 Y 325
>>> > > > > Brick 192.168.0.41:/var/bricks/arb_1/brick 49157 0 Y 1746903
>>> > > > > Brick 192.168.0.40:/var/bricks/1/brick 49157 0 Y 713084
>>> > > > > Brick 192.168.0.41:/var/bricks/1/brick 49153 0 Y 14104
>>> > > > > Brick 192.168.0.80:/var/bricks/arb_1/brick 49159 0 Y 2314
>>> > > > > Brick 192.168.0.40:/var/bricks/3/brick 49153 0 Y 2978692
>>> > > > > Brick 192.168.0.80:/var/bricks/3/brick 49155 0 Y 23269
>>> > > > > Brick 192.168.0.41:/var/bricks/arb_0/brick 49158 0 Y 1746942
>>> > > > > Brick 192.168.0.41:/var/bricks/3/brick 49155 0 Y 897058
>>> > > > > Brick 192.168.0.80:/var/bricks/4/brick 49156 0 Y 27433
>>> > > > > Brick 192.168.0.40:/var/bricks/arb_0/brick 49152 0 Y 3561115
>>> > > > > Brick 192.168.0.41:/var/bricks/2/brick 49156 0 Y 902602
>>> > > > > Brick 192.168.0.80:/var/bricks/5/brick 49157 0 Y 29522
>>> > > > > Brick 192.168.0.40:/var/bricks/arb_1/brick 49154 0 Y 3561159
>>> > > > > Self-heal Daemon on localhost N/A N/A Y 26199
>>> > > > > Self-heal Daemon on 192.168.0.41 N/A N/A Y 2240635
>>> > > > > Self-heal Daemon on 192.168.0.40 N/A N/A Y 3912810
>>> > > > >
>>> > > > > Task Status of Volume gv0
>>> > > > > ------------------------------------------------------------------------------
>>> > > > > There are no active volume tasks
>>> > > > >
>>> > > > > volume heal info summary:
>>> > > > >
>>> > > > > Brick 192.168.0.40:/var/bricks/0/brick <--- contains 100177 files in 25015 dirs
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 1006
>>> > > > > Number of entries in heal pending: 1006
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.41:/var/bricks/0/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 1006
>>> > > > > Number of entries in heal pending: 1006
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.80:/var/bricks/arb_0/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.40:/var/bricks/2/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.80:/var/bricks/2/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.41:/var/bricks/arb_1/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.40:/var/bricks/1/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 1006
>>> > > > > Number of entries in heal pending: 1006
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.41:/var/bricks/1/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 1006
>>> > > > > Number of entries in heal pending: 1006
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.80:/var/bricks/arb_1/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.40:/var/bricks/3/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.80:/var/bricks/3/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.41:/var/bricks/arb_0/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.41:/var/bricks/3/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.80:/var/bricks/4/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.40:/var/bricks/arb_0/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.41:/var/bricks/2/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.80:/var/bricks/5/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > Brick 192.168.0.40:/var/bricks/arb_1/brick
>>> > > > > Status: Connected
>>> > > > > Total Number of entries: 0
>>> > > > > Number of entries in heal pending: 0
>>> > > > > Number of entries in split-brain: 0
>>> > > > > Number of entries possibly healing: 0
>>> > > > >
>>> > > > > client-list:
>>> > > > >
>>> > > > > Client connections for volume gv0
>>> > > > > Name count
>>> > > > > ----- ------
>>> > > > > fuse 5
>>> > > > > gfapi.ganesha.nfsd 3
>>> > > > > glustershd 3
>>> > > > >
>>> > > > > total clients for volume gv0 : 11
>>> > > > > -----------------------------------------------------------------
>>> > > > >
>>> > > > > all clients: pro.hostit.de/nextcloud/index.php/s/tWdHox3aqb3qqbG
>>> > > > >
>>> > > > > failing mnt.log pro.hostit.de/nextcloud/index.php/s/2E2NLnXNsTy7EQe
>>> > > > >
>>> > > > > Thank you.
>>> > > > >
>>> > > > > A.
>>> > > > >
>>> > > > > "Strahil Nikolov" hunter86_bg@xxxxxxxxx – 31. Mai 2021 05:23
>>> > > > > > Can you provide gluster volume info , gluster volume status and gluster volume heal info summary and most probably gluster volume status all clients/client-list
>>> > > > > >
>>> > > > > >
>>> > > > > > Best Regards,
>>> > > > > > Strahil Nikolov
>>> > > > > >
>>> > > > > > > On Sun, May 30, 2021 at 15:17, a.schwibbe@xxxxxxx
>>> > > > > > > wrote:
>>> > > > > > >
>>> > > > > > > I am seeking help here after looking for solutions on the web for my distributed-replicated volume.
>>> > > > > > >
>>> > > > > > > My volume is operated since v3.10 and I upgraded through to 7.9, replaced nodes, replaced bricks without a problem. I love it.
>>> > > > > > >
>>> > > > > > > Finally I wanted to extend my 6x2 distributed replicated volume with arbiters for better split-brain protection.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > So I add-brick with replication 3 arbiter 1 (as I had a 6x2 I obviously added 6 arb bricks) and it successfully converted to 6 x (2 +1) and self-heal immideately started. Looking good.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Version: 7.9
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Number of Bricks: 6 x (2 + 1) = 18
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > cluster.max-op-version: 70200
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Peers: 3 (node[0..2])
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Layout
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > |node0 |node1 |node2
>>> > > > > > >
>>> > > > > > > |brick0 |brick0 |arbit0
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > |arbit1 |brick1 |brick1
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > ....
>>> > > > > > >
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > I then recognized that arbiter volumes on node0 & node1 have been healed successfully.
>>> > > > > > >
>>> > > > > > > Unfortunately all arbiter volumes on node2 have not been healed!
>>> > > > > > >
>>> > > > > > > I realized that the main dir on my arb mount point has been added (mount point /var/brick/arb_0 now contains dir "brick") however this dir on _all_ other bricks has numeric ID 33, but on this on it has 0). The brick dir on the faulty arb-volumes does contain ".glusterfs", however it has only very few entries. Other than that "brick" is empty.
>>> > > > > > >
>>> > > > > > > At that point I changed brick dir owner with chown to 33:33 and hoped for self-heal to work. It did not.
>>> > > > > > >
>>> > > > > > > I hoped a rebalance fix-layout would fix things. It did not.
>>> > > > > > >
>>> > > > > > > I hoped for a glusterd restart on node2 (as this is happening to both arb volumes on this node exclusively) would help. It did not.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Active mount points via nfs-ganesha or fuse continue to work.
>>> > > > > > >
>>> > > > > > > Existing clients cause errors in the arb-brick logs on node2 for missing files or dirs, but clients seem not affected. r/w operations work.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > New clients are not able to fuse mount the volume for "authentication error".
>>> > > > > > >
>>> > > > > > > heal statistics heal-count show several hundred files need healing, this count is rising. Watching df on the arb-brick mount point on node2 shows every now and then a few bytes written, but then removed immideately after that.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Any help/recommendation for you highly appreciated.
>>> > > > > > >
>>> > > > > > > Thank you!
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > A.
>>> > > > > > >
>>> > > > > > > ________
>>> > > > > > >
>>> > > > > > >
>>> > > > > > >
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Community Meeting Calendar:
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > Schedule -
>>> > > > > > >
>>> > > > > > > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
>>> > > > > > >
>>> > > > > > > Bridge: meet.google.com/cpu-eiue-hvk
>>> > > > > > >
>>> > > > > > > Gluster-users mailing list
>>> > > > > > >
>>> > > > > > > Gluster-users@xxxxxxxxxxx
>>> > > > > > >
>>> > > > > > > lists.gluster.org/mailman/listinfo/gluster-users
>>> > > > > > >
>>> > > > > > >
>>> > > > >
>>> > > > >
>>> > >
>>> > >
>>> ________
>>>
>>>
>>>
>>> Community Meeting Calendar:
>>>
>>> Schedule -
>>> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
>>> Bridge: meet.google.com/cpu-eiue-hvk
>>> Gluster-users mailing list
>>> Gluster-users@xxxxxxxxxxx
>>> lists.gluster.org/mailman/listinfo/gluster-users
>>>
>>>
> 
________



Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users




[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux