You can try the path of a file based on gfid (method 2) via: https://docs.gluster.org/en/latest/Troubleshooting/gfid-to-path/ The gfids from the strace should be there, but if the file was renamed/deleted - it is normall to be missing. Have you joined the last gluster meeting to discuss the problem ? Best Regards, Strahil Nikolov На 11 юни 2020 г. 3:15:36 GMT+03:00, David Cunningham <dcunningham@xxxxxxxxxxxxx> написа: >Hi Strahil, > >Thanks for that. I did search for a file with the gfid in the name, on >both >the master nodes and geo-replication slave, but none of them had such a >file. I guess maybe by the time I looked the file had been deleted? >Either >that or something is more seriously wrong with invalid gfids. > >BTW, I used strace to try and see what gsyncd was up to when using all >that >CPU. Running strace attached to gsyncd for 10 seconds gave 168,000 >lines of >output, mostly like the following: > >read(6, "CHANGELOG.1585775398\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 >lseek(6, 1088012288, SEEK_SET) = 1088012288 >lseek(6, 1088012288, SEEK_SET) = 1088012288 >read(6, "est\nE da6ed6e8-2b49-4a56-b783-d0"..., 4096) = 4096 >lseek(6, 1088016384, SEEK_SET) = 1088016384 >lseek(6, 1088016384, SEEK_SET) = 1088016384 >read(6, "lock-05380315\nE cf5fe292-2ebf-43"..., 4096) = 4096 >lseek(6, 1088020480, SEEK_SET) = 1088020480 >lseek(6, 1088020480, SEEK_SET) = 1088020480 >read(6, "7 10a14313-4f92-4071-83cb-c900ef"..., 4096) = 4096 >lseek(6, 1088024576, SEEK_SET) = 1088024576 >lseek(6, 1088024576, SEEK_SET) = 1088024576 >read(6, "D b70ba2e8-d954-4fb2-b17a-77c8cc"..., 4096) = 4096 >lseek(6, 1088028672, SEEK_SET) = 1088028672 >lseek(6, 1088028672, SEEK_SET) = 1088028672 >read(6, "01681-e324-4f13-ab3a-0e8ae50ff95"..., 4096) = 4096 >lseek(6, 1088032768, SEEK_SET) = 1088032768 >read(6, "09ef519/voicemail_1585336530_158"..., 4096) = 4096 >lseek(6, 1088036864, SEEK_SET) = 1088036864 >read(6, "6-4539-8d7f-d17fb8f71d6d\nD 1236c"..., 4096) = 4096 >lseek(6, 1088040960, SEEK_SET) = 1088040960 >lseek(6, 1088040960, SEEK_SET) = 1088040960 >read(6, "6-4d54-8b9b-4146930b3a2d\nD 88287"..., 4096) = 4096 > >I'm guessing those reads are mostly on the files under .glusterfs? I >did >check for files matching the names above and there aren't any matching >"da6ed6e8-2b49-4a56-b783-d0", "cf5fe292-2ebf-43", or >"10a14313-4f92-4071-83cb-c900ef" though. > >Any guidance would be appreciated. > > >On Wed, 10 Jun 2020 at 16:06, Strahil Nikolov <hunter86_bg@xxxxxxxxx> >wrote: > >> Hey David, >> >> Sadly I just have a feeling that on any brick there is a gfid >mismatch, >> but I could be wrong. >> >> As you have the gfid list, please check on all bricks (both master >and >> slave) that the file exists (not the one in .gluster , but the real >one) >> and it has the same gfid. >> >> You can find the inode via ls and then run a find (don't forget the >> ionice) against the brick and that inode number. >> >> Once you have the full path to the file , test: >> - Mount with FUSE >> - Check file exists ( no '??????' for permissions, size, etc) and can >be >> manipulated (maybe 'touch' can be used ?) >> - Find (on all replica sets ) the file and check the gfid >> - Check for heals pending for that gfid >> >> >> Best Regards, >> Strahil Nikolov >> >> На 10 юни 2020 г. 6:37:35 GMT+03:00, David Cunningham < >> dcunningham@xxxxxxxxxxxxx> написа: >> >Hi Strahil, >> > >> >Thank you for that. Do you know if these "Stale file handle" errors >on >> >the >> >geo-replication slave could be related? >> > >> >[2020-06-10 01:02:32.268989] E [MSGID: 109040] >> >[dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht: >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba: failed to lookup the >file >> >on >> >gvol0-dht [Stale file handle] >> >[2020-06-10 01:02:32.269092] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434237: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.329280] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434251: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.387129] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434264: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.448838] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434277: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.507196] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434290: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.566033] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434303: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.625168] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434316: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.772442] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434329: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.832481] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434342: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> >[2020-06-10 01:02:32.891835] W [fuse-bridge.c:897:fuse_attr_cbk] >> >0-glusterfs-fuse: 7434403: STAT() >> >/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file >handle) >> > >> > >> > >> >On Tue, 9 Jun 2020 at 16:31, Strahil Nikolov <hunter86_bg@xxxxxxxxx> >> >wrote: >> > >> >> Hey David, >> >> >> >> Can you check the cpu usage in the sar on the rest of the cluster >> >(going >> >> backwards from the day you found the high cpu usage), so we can >know >> >if >> >> this behaviour was obseerved on other nodes. >> >> >> >> Maybe that behaviour was "normal" for the push node (which could >be >> >> another one) . >> >> >> >> As this script is python, I guess you can put some debug >print >> >> statements in it. >> >> >> >> Best Regards, >> >> Strahil Nikolov >> >> >> >> На 9 юни 2020 г. 5:07:11 GMT+03:00, David Cunningham < >> >> dcunningham@xxxxxxxxxxxxx> написа: >> >> >Hi Sankarshan, >> >> > >> >> >Thanks for that. So what should we look for to figure out what >this >> >> >process >> >> >is doing? In >> >> >/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log >we >> >see >> >> >something like the following logged regularly: >> >> > >> >> > >> >> >[[2020-06-09 02:01:19.670595] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1454:changelogs_batch_process] >> >> >_GMaster: >> >> >processing changes >> >> >> >> >> >> >>>batch=['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040', >> >> >> >> >> >> >>>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055'] >> >> >[2020-06-09 02:01:19.674927] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1289:process] _GMaster: >processing >> >> >change >> >> > >> >> >> >> >> >> >>>changelog=/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040 >> >> >[2020-06-09 02:01:19.683098] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1170:process_change] _GMaster: >> >> >entries: [] >> >> >[2020-06-09 02:01:19.695125] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):312:a_syncdata] _GMaster: files >> >> >files=set(['.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17', >> >> >'.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77', >> >> >'.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0', >> >> >'.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435']) >> >> >[2020-06-09 02:01:19.695344] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster: >> >candidate >> >> >for >> >> >syncing file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17 >> >> >[2020-06-09 02:01:19.695508] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster: >> >candidate >> >> >for >> >> >syncing file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77 >> >> >[2020-06-09 02:01:19.695638] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster: >> >candidate >> >> >for >> >> >syncing file=.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0 >> >> >[2020-06-09 02:01:19.695759] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster: >> >candidate >> >> >for >> >> >syncing file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435 >> >> >[2020-06-09 02:01:19.695883] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1289:process] _GMaster: >processing >> >> >change >> >> > >> >> >> >> >> >> >>>changelog=/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055 >> >> >[2020-06-09 02:01:19.696170] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1170:process_change] _GMaster: >> >> >entries: [] >> >> >[2020-06-09 02:01:19.714097] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):312:a_syncdata] _GMaster: files >> >> >files=set(['.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17', >> >> >'.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77', >> >> >'.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435']) >> >> >[2020-06-09 02:01:19.714286] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster: >> >candidate >> >> >for >> >> >syncing file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17 >> >> >[2020-06-09 02:01:19.714433] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster: >> >candidate >> >> >for >> >> >syncing file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77 >> >> >[2020-06-09 02:01:19.714577] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster: >> >candidate >> >> >for >> >> >syncing file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435 >> >> >[2020-06-09 02:01:20.179656] D [resource(worker >> >> >/nodirectwritedata/gluster/gvol0):1419:rsync] SSH: files: >> >> >.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17, >> >> >.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77, >> >> >.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0, >> >> >.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435, >> >> >.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17, >> >> >.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77, >> >> >.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435 >> >> >[2020-06-09 02:01:20.738632] I [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1954:syncjob] Syncer: Sync Time >> >Taken >> >> >duration=0.5588 num_files=7 job=2 return_code=0 >> >> >[2020-06-09 02:01:20.739650] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced >> >> > file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17 >> >> >[2020-06-09 02:01:20.740041] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced >> >> > file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77 >> >> >[2020-06-09 02:01:20.740200] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced >> >> > file=.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0 >> >> >[2020-06-09 02:01:20.740343] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced >> >> > file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435 >> >> >[2020-06-09 02:01:20.740482] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced >> >> > file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17 >> >> >[2020-06-09 02:01:20.740616] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced >> >> > file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77 >> >> >[2020-06-09 02:01:20.740741] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced >> >> > file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435 >> >> >[2020-06-09 02:01:20.745385] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call >> >> >22499:140085349934848:1591668080.75 >> >> >> >> >> >> >>>done('/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040',) >> >> >... >> >> >[2020-06-09 02:01:20.746252] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call >> >> >22499:140085349934848:1591668080.75 done -> None >> >> >[2020-06-09 02:01:20.746515] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call >> >> >22499:140085349934848:1591668080.75 >> >> >> >> >> >> >>>done('/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055',) >> >> >... >> >> >[2020-06-09 02:01:20.747045] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call >> >> >22499:140085349934848:1591668080.75 done -> None >> >> >[2020-06-09 02:01:31.364780] I [gsyncd(config-get):308:main] ><top>: >> >> >Using >> >> >session config file >> >> >> >>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >[2020-06-09 02:01:31.458915] I [gsyncd(status):308:main] <top>: >> >Using >> >> >session config file >> >> >> >>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >[2020-06-09 02:01:32.156028] I [gsyncd(config-get):308:main] ><top>: >> >> >Using >> >> >session config file >> >> >> >>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >[2020-06-09 02:01:32.250082] I [gsyncd(status):308:main] <top>: >> >Using >> >> >session config file >> >> >> >>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >[2020-06-09 02:01:33.778866] I [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster: Entry >Time >> >> >Taken >> >> > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0 CRE=0 >> >> >duration=0.0000 UNL=0 >> >> >[2020-06-09 02:01:33.779000] I [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster: >> >Data/Metadata >> >> >Time Taken SETA=0 SETX=0 meta_duration=0.0000 >> >> > data_duration=14.0839 DATA=11 XATT=0 >> >> >[2020-06-09 02:01:33.779195] I [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster: Batch >> >> >Completed >> >> >changelog_end=1591668055 entry_stime=(1591668024, 0) >> >> >changelog_start=1591668040 stime=(1591668054, 0) >> >> >duration=14.1043 >> >> > num_changelogs=2 mode=live_changelog >> >> >[2020-06-09 02:01:35.337511] I [gsyncd(config-get):308:main] ><top>: >> >> >Using >> >> >session config file >> >> >> >>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >[2020-06-09 02:01:35.432674] I [gsyncd(status):308:main] <top>: >> >Using >> >> >session config file >> >> >> >>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >[2020-06-09 02:01:38.784449] D [master(worker >> >> >/nodirectwritedata/gluster/gvol0):551:crawlwrap] _GMaster: ... >crawl >> >> >#18195 >> >> >done, took 32.533401 seconds >> >> >[2020-06-09 02:01:38.790709] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call >> >> >22499:140085349934848:1591668098.79 scan() ... >> >> >[2020-06-09 02:01:38.791342] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call >> >> >22499:140085349934848:1591668098.79 scan -> None >> >> >[2020-06-09 02:01:38.791479] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call >> >> >22499:140085349934848:1591668098.79 getchanges() ... >> >> >[2020-06-09 02:01:38.791989] D [repce(worker >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call >> >> >22499:140085349934848:1591668098.79 getchanges -> >> >> >> >> >> >> >>>['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668069', >> >> >> >> >> >> >>>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668083', >> >> >> >> >> >> >>>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668097'] >> >> >[2020-06-09 02:01:38.792114] I [master(worker >> >> >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster: slave's >time >> >> > stime=(1591668054, 0) >> >> > >> >> >Something very similar is logged around every 32 seconds, and I >> >notice >> >> >the >> >> >log above says the crawl took 32 seconds. >> >> > >> >> > >> >> >On Mon, 8 Jun 2020 at 16:22, sankarshan <sankarshan@xxxxxxxxx> >> >wrote: >> >> > >> >> >> Reading through the thread it occurs to me that it would be a >> >> >stronger >> >> >> approach to understand the workload (a general description of >the >> >> >> application) and in terms of the releases of GlusterFS running, >> >> >assess >> >> >> if there are new issues to be addressed or if existing sets of >> >> >patches >> >> >> tend to work. Thanks for setting up the debug level in the log. >> >High >> >> >> CPU usage by a geo-replication process would need to be traced >> >back >> >> >to >> >> >> why it really requires that %-age of CPU if it was not doing so >> >> >> previously. >> >> >> >> >> >> On Mon, 8 Jun 2020 at 05:29, David Cunningham >> >> ><dcunningham@xxxxxxxxxxxxx> >> >> >> wrote: >> >> >> > >> >> >> > Hi Strahil, >> >> >> > >> >> >> > The CPU is still quite high, with "top" regularly showing >100% >> >CPU >> >> >usage >> >> >> by that process. However it's not clear whether this is really >a >> >> >problem, >> >> >> or if it's just normal geo-replication activity. While CPU >usage >> >was >> >> >not >> >> >> previously as high on this server, it's not clear whether >> >GlusterFS >> >> >might >> >> >> have made this the "push" node for geo-replication when it used >to >> >be >> >> >some >> >> >> other server. Having said that, no other server shows a sudden >> >drop >> >> >in CPU >> >> >> usage. >> >> >> > >> >> >> > Ideally we could find out what the gsyncd process is doing, >and >> >> >> therefore whether it's expected or not. Any ideas on that? We >did >> >set >> >> >the >> >> >> log level to DEBUG as Sunny suggested. >> >> >> > >> >> >> > Looking at >> >> >> >> >> >> >> >> >> >>>/var/log/glusterfs/geo-replication-slaves/gvol0_nvfs10_gvol0/mnt-cafs30-nodirectwritedata-gluster-gvol0.log >> >> >> on the geo-replication slave, we have a lot of lines like the >> >> >following >> >> >> logged. >> >> >> > >> >> >> > [2020-06-06 00:32:43.155856] W >[fuse-bridge.c:897:fuse_attr_cbk] >> >> >> 0-glusterfs-fuse: 875853: STAT() >> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file >> >handle) >> >> >> > [2020-06-06 00:32:43.219759] W >[fuse-bridge.c:897:fuse_attr_cbk] >> >> >> 0-glusterfs-fuse: 875923: STAT() >> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file >> >handle) >> >> >> > [2020-06-06 00:32:43.280357] W >[fuse-bridge.c:897:fuse_attr_cbk] >> >> >> 0-glusterfs-fuse: 876001: STAT() >> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file >> >handle) >> >> >> > The message "E [MSGID: 109040] >> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] >0-gvol0-dht: >> >> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac: failed to lookup >the >> >> >file on >> >> >> gvol0-dht [Stale file handle]" repeated 9 times between >> >[2020-06-06 >> >> >> 00:32:42.689780] and [2020-06-06 00:32:43.280322] >> >> >> > [2020-06-06 09:03:03.660956] E [MSGID: 109040] >> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] >0-gvol0-dht: >> >> >> /.gfid/decdd552-d58b-4ddf-b27a-0da9a6fbc38b: failed to lookup >the >> >> >file on >> >> >> gvol0-dht [Stale file handle] >> >> >> > [2020-06-06 09:03:03.661057] W >[fuse-bridge.c:897:fuse_attr_cbk] >> >> >> 0-glusterfs-fuse: 965375: STAT() >> >> >> /.gfid/decdd552-d58b-4ddf-b27a-0da9a6fbc38b => -1 (Stale file >> >handle) >> >> >> > [2020-06-06 09:03:10.258798] E [MSGID: 109040] >> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] >0-gvol0-dht: >> >> >> /.gfid/1d90e129-d40f-4ca4-bea8-0bb3c4c7985a: failed to lookup >the >> >> >file on >> >> >> gvol0-dht [Stale file handle] >> >> >> > [2020-06-06 09:03:10.258880] W >[fuse-bridge.c:897:fuse_attr_cbk] >> >> >> 0-glusterfs-fuse: 969455: STAT() >> >> >> /.gfid/1d90e129-d40f-4ca4-bea8-0bb3c4c7985a => -1 (Stale file >> >handle) >> >> >> > [2020-06-06 09:09:41.259362] E [MSGID: 109040] >> >> >> [dht-helper.c:1332:dht_migration_complete_check_task] >0-gvol0-dht: >> >> >> /.gfid/740efff6-74dd-45be-847f-66919d1179e0: failed to lookup >the >> >> >file on >> >> >> gvol0-dht [Stale file handle] >> >> >> > [2020-06-06 09:09:41.259458] W >[fuse-bridge.c:897:fuse_attr_cbk] >> >> >> 0-glusterfs-fuse: 1040904: STAT() >> >> >> /.gfid/740efff6-74dd-45be-847f-66919d1179e0 => -1 (Stale file >> >handle) >> >> >> > >> >> >> > Could these errors be part of the problem? >> >> >> > >> >> >> > Thanks again. >> >> >> > >> >> >> > >> >> >> > On Sat, 6 Jun 2020 at 21:21, Strahil Nikolov >> >> ><hunter86_bg@xxxxxxxxx> >> >> >> wrote: >> >> >> >> >> >> >> >> Hey David, >> >> >> >> >> >> >> >> can you check the old logs for gfid mismatch and get a list >of >> >> >files >> >> >> that were causing the high cpu . >> >> >> >> Maybe they are related somehow (maybe created by the same >> >> >software >> >> >> , same client version or something else) which could help >about >> >> >that. >> >> >> >> >> >> >> >> Also take a look in geo-replication-slave logs. >> >> >> >> >> >> >> >> Does the issue still occurs ? >> >> >> >> >> >> >> >> Best Regards, >> >> >> >> Strahil Nikolov >> >> >> >> >> >> >> >> На 6 юни 2020 г. 1:21:55 GMT+03:00, David Cunningham < >> >> >> dcunningham@xxxxxxxxxxxxx> написа: >> >> >> >> >Hi Sunny and Strahil, >> >> >> >> > >> >> >> >> >Thanks again for your responses. We don't have a lot of >> >renaming >> >> >> >> >activity - >> >> >> >> >maybe some, but not a lot. We do have files which are open >for >> >> >writing >> >> >> >> >for >> >> >> >> >quite a while - they're call recordings being written as >the >> >call >> >> >> >> >happens. >> >> >> >> > >> >> >> >> >We've installed GlusterFS using the Ubuntu packages and I'd >> >> >really like >> >> >> >> >to >> >> >> >> >avoid compiling and applying patches. >> >> >> >> > >> >> >> >> >After enabling DEBUG the log at >> >> >> >> >> >>/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log >> >> >> >> >doesn't >> >> >> >> >seem to show anything very unusual: >> >> >> >> > >> >> >> >> >[2020-06-03 02:49:01.992177] I [master(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster: >> >Entry >> >> >Time >> >> >> >> >Taken >> >> >> >> > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0CRE=0 >> >> >duration=0.0000 >> >> >> >> >UNL=0 >> >> >> >> >[2020-06-03 02:49:01.992465] I [master(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster: >> >> >Data/Metadata >> >> >> >> >Time Taken SETA=0 SETX=0 >> >> >> >> >meta_duration=0.0000data_duration=13.0954 >> >> >> >> > DATA=8 XATT=0 >> >> >> >> >[2020-06-03 02:49:01.992863] I [master(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster: >> >Batch >> >> >> >> >Completed >> >> >> >> >changelog_end=1591152508 entry_stime=(1591152352, 0) >> >> >> >> >changelog_start=1591152494 stime=(1591152507, 0) >> >> >> >> >duration=13.1077 >> >> >> >> > num_changelogs=2 mode=live_changelog >> >> >> >> >[2020-06-03 02:49:02.958687] D [repce(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: >call >> >> >> >> >19017:139678812452608:1591152542.96 keep_alive({'version': >(1, >> >> >0), >> >> >> >> >'retval': 0, 'uuid': >'8ee85fae-f3aa-4285-ad48-67a1dc17ed73', >> >> >'timeout': >> >> >> >> >1591152662, 'volume_mark': (1583043396, 161632)},) ... >> >> >> >> >[2020-06-03 02:49:02.979139] D [repce(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] >RepceClient: >> >call >> >> >> >> >19017:139678812452608:1591152542.96 keep_alive -> 28 >> >> >> >> >[2020-06-03 02:49:06.998127] D [master(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):551:crawlwrap] _GMaster: >... >> >> >crawl >> >> >> >> >#114 >> >> >> >> >done, took 30.180089 seconds >> >> >> >> >[2020-06-03 02:49:07.10132] D [repce(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: >call >> >> >> >> >19017:139679441716992:1591152547.01 scan() ... >> >> >> >> >[2020-06-03 02:49:07.10781] D [repce(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] >RepceClient: >> >call >> >> >> >> >19017:139679441716992:1591152547.01 scan -> None >> >> >> >> >[2020-06-03 02:49:07.10935] D [repce(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: >call >> >> >> >> >19017:139679441716992:1591152547.01 getchanges() ... >> >> >> >> >[2020-06-03 02:49:07.11579] D [repce(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] >RepceClient: >> >call >> >> >> >> >19017:139679441716992:1591152547.01 getchanges -> >> >> >> >> >> >> >> >> >> >> >> >> >> >>>>['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591152522'] >> >> >> >> >[2020-06-03 02:49:07.11720] I [master(worker >> >> >> >> >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster: >> >slave's >> >> >time >> >> >> >> >stime=(1591152507, 0) >> >> >> >> > >> >> >> >> >Am I looking in the right place to find out what that >> >gsyncd.py >> >> >process >> >> >> >> >is >> >> >> >> >doing? >> >> >> >> > >> >> >> >> > >> >> >> >> >On Tue, 2 Jun 2020 at 21:58, Sunny Kumar ><sunkumar@xxxxxxxxxx> >> >> >wrote: >> >> >> >> > >> >> >> >> >> Hi David, >> >> >> >> >> >> >> >> >> >> You haven't answered my previous question regarding the >type >> >of >> >> >your >> >> >> >> >> workload. >> >> >> >> >> --- >> >> >> >> >> You can use the below command to enable debug log. >> >> >> >> >> >> >> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol> >> >config >> >> >> >> >log-level >> >> >> >> >> DEBUG` >> >> >> >> >> >> >> >> >> >> and after capturing log again switch back to info mode: >> >> >> >> >> >> >> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol> >> >config >> >> >> >> >log-level >> >> >> >> >> INFO` >> >> >> >> >> >> >> >> >> >> Please share the debug log and geo-rep config to debug >> >further: >> >> >> >> >> for config: >> >> >> >> >> >> >> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol> >> >> >config` >> >> >> >> >> >> >> >> >> >> /sunny >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Tue, Jun 2, 2020 at 10:18 AM Strahil Nikolov >> >> >> >> ><hunter86_bg@xxxxxxxxx> >> >> >> >> >> wrote: >> >> >> >> >> > >> >> >> >> >> > Hi David, >> >> >> >> >> > >> >> >> >> >> > in which log do you see the entries ? >> >> >> >> >> > >> >> >> >> >> > I think I got an explanation why you see the process >only >> >on >> >> >one >> >> >> >> >of the >> >> >> >> >> master nodes - geo-rep session is established from only >1 >> >> >master >> >> >> >> >node /I >> >> >> >> >> hope someone corrects me if I'm wrong/ to one slave node. >> >Thus >> >> >it >> >> >> >> >will be >> >> >> >> >> natural to see the high CPU usage on only 1 master node >in >> >> >your >> >> >> >> >situation. >> >> >> >> >> > >> >> >> >> >> > Do you see anything else in the : >> >> >> >> >> var/log/glusterfs/geo-replication/<logs> (master nodes) >or >> >in >> >> >> >> >> /var/log/glusterfs/geo-replication-slaves (slaves) that >> >could >> >> >hint of >> >> >> >> >the >> >> >> >> >> exact issue. I have a vague feeling that that python >script >> >is >> >> >> >> >constantly >> >> >> >> >> looping over some data causing the CPU hog. >> >> >> >> >> > >> >> >> >> >> > Sadly, I can't find an instruction for increasing the >log >> >> >level of >> >> >> >> >the >> >> >> >> >> geo rep log . >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > Best Regards, >> >> >> >> >> > Strahil Nikolov >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > На 2 юни 2020 г. 6:14:46 GMT+03:00, David Cunningham < >> >> >> >> >> dcunningham@xxxxxxxxxxxxx> написа: >> >> >> >> >> > >Hi Strahil and Sunny, >> >> >> >> >> > > >> >> >> >> >> > >Thank you for the replies. I checked the gfid on the >> >master >> >> >and >> >> >> >> >slaves >> >> >> >> >> > >and >> >> >> >> >> > >they are the same. After moving the file away and back >> >again >> >> >it >> >> >> >> >doesn't >> >> >> >> >> > >seem to be having the issue with that file any more. >> >> >> >> >> > > >> >> >> >> >> > >We are still getting higher CPU usage on one of the >> >master >> >> >nodes >> >> >> >> >than >> >> >> >> >> > >the >> >> >> >> >> > >others. It logs this every few seconds: >> >> >> >> >> > > >> >> >> >> >> > >[2020-06-02 03:10:15.637815] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1384:process] >_GMaster: >> >> >Entry >> >> >> >> >Time >> >> >> >> >> > >Taken >> >> >> >> >> > > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0CRE=0 >> >> >> >> >duration=0.0000 >> >> >> >> >> > >UNL=0 >> >> >> >> >> > >[2020-06-02 03:10:15.638010] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1394:process] >_GMaster: >> >> >> >> >Data/Metadata >> >> >> >> >> > >Time Taken SETA=0 SETX=0 >> >> >> >> >> > >meta_duration=0.0000data_duration=12.7878 >> >> >> >> >> > > DATA=4 XATT=0 >> >> >> >> >> > >[2020-06-02 03:10:15.638286] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1404:process] >_GMaster: >> >> >Batch >> >> >> >> >> > >Completed >> >> >> >> >> > >changelog_end=1591067378 >entry_stime=(1591067167, >> >0) >> >> >> >> >> > >changelog_start=1591067364 stime=(1591067377, 0) >> >> >> >> >> > >duration=12.8068 >> >> >> >> >> > > num_changelogs=2 mode=live_changelog >> >> >> >> >> > >[2020-06-02 03:10:20.658601] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1470:crawl] >_GMaster: >> >> >slave's >> >> >> >> >time >> >> >> >> >> > > stime=(1591067377, 0) >> >> >> >> >> > >[2020-06-02 03:10:34.21799] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1954:syncjob] >Syncer: >> >Sync >> >> >Time >> >> >> >> >Taken >> >> >> >> >> > > duration=0.3826 num_files=8 job=1 return_code=0 >> >> >> >> >> > >[2020-06-02 03:10:46.440535] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1384:process] >_GMaster: >> >> >Entry >> >> >> >> >Time >> >> >> >> >> > >Taken >> >> >> >> >> > > MKD=0 MKN=0 LIN=0 SYM=0 REN=1 RMD=0CRE=2 >> >> >> >> >duration=0.1314 >> >> >> >> >> > >UNL=1 >> >> >> >> >> > >[2020-06-02 03:10:46.440809] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1394:process] >_GMaster: >> >> >> >> >Data/Metadata >> >> >> >> >> > >Time Taken SETA=0 SETX=0 >> >> >> >> >> > >meta_duration=0.0000data_duration=13.0171 >> >> >> >> >> > > DATA=14 XATT=0 >> >> >> >> >> > >[2020-06-02 03:10:46.441205] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1404:process] >_GMaster: >> >> >Batch >> >> >> >> >> > >Completed >> >> >> >> >> > >changelog_end=1591067420 >entry_stime=(1591067419, >> >0) >> >> >> >> >> > >changelog_start=1591067392 stime=(1591067419, 0) >> >> >> >> >> > >duration=13.0322 >> >> >> >> >> > > num_changelogs=3 mode=live_changelog >> >> >> >> >> > >[2020-06-02 03:10:51.460925] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1470:crawl] >_GMaster: >> >> >slave's >> >> >> >> >time >> >> >> >> >> > > stime=(1591067419, 0) >> >> >> >> >> > > >> >> >> >> >> > >[2020-06-02 03:11:04.448913] I [master(worker >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0):1954:syncjob] >Syncer: >> >Sync >> >> >Time >> >> >> >> >Taken >> >> >> >> >> > >duration=0.3466 num_files=3 job=1 return_code=0 >> >> >> >> >> > > >> >> >> >> >> > >Whereas the other master nodes only log this: >> >> >> >> >> > > >> >> >> >> >> > >[2020-06-02 03:11:33.886938] I >> >[gsyncd(config-get):308:main] >> >> >> >> ><top>: >> >> >> >> >> > >Using >> >> >> >> >> > >session config file >> >> >> >> >> > >> >> >> >> >> >> >> >>>>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >> >> >> > >[2020-06-02 03:11:33.993175] I >[gsyncd(status):308:main] >> >> ><top>: >> >> >> >> >Using >> >> >> >> >> > >session config file >> >> >> >> >> > >> >> >> >> >> >> >> >>>>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf >> >> >> >> >> > > >> >> >> >> >> > >Can anyone help with what might cause the high CPU >usage >> >on >> >> >one >> >> >> >> >master >> >> >> >> >> > >node? The process is this one, and is using 70-100% of >> >CPU: >> >> >> >> >> > > >> >> >> >> >> > >python2 >> >> >> >> >> >>/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py >> >> >> >> >> > >worker gvol0 nvfs10::gvol0 --feedback-fd 15 >--local-path >> >> >> >> >> > >/nodirectwritedata/gluster/gvol0 --local-node cafs30 >> >> >> >> >--local-node-id >> >> >> >> >> > >b7521445-ee93-4fed-8ced-6a609fa8c7d4 --slave-id >> >> >> >> >> > >cdcdb210-839c-4306-a4dc-e696b165ed17 --rpc-fd >12,11,9,13 >> >> >> >> >--subvol-num 1 >> >> >> >> >> > >--resource-remote nvfs30 --resource-remote-id >> >> >> >> >> > >1e698ccd-aeec-4ec4-96fe-383da8fc3b78 >> >> >> >> >> > > >> >> >> >> >> > >Thank you in advance! >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > >On Sat, 30 May 2020 at 20:20, Strahil Nikolov >> >> >> >> ><hunter86_bg@xxxxxxxxx> >> >> >> >> >> > >wrote: >> >> >> >> >> > > >> >> >> >> >> > >> Hey David, >> >> >> >> >> > >> >> >> >> >> >> > >> for me a gfid mismatch means that the file was >> >> >> >> >replaced/recreated >> >> >> >> >> > > - >> >> >> >> >> > >> just like vim in linux does (and it is expected for >> >> >config >> >> >> >> >file). >> >> >> >> >> > >> >> >> >> >> >> > >> Have you checked the gfid of the file on both >source >> >> >and >> >> >> >> >> > >destination, >> >> >> >> >> > >> do they really match or they are different ? >> >> >> >> >> > >> >> >> >> >> >> > >> What happens when you move away the file from the >> >slave >> >> >, >> >> >> >> >does it >> >> >> >> >> > >fixes >> >> >> >> >> > >> the issue ? >> >> >> >> >> > >> >> >> >> >> >> > >> Best Regards, >> >> >> >> >> > >> Strahil Nikolov >> >> >> >> >> > >> >> >> >> >> >> > >> На 30 май 2020 г. 1:10:56 GMT+03:00, David >Cunningham < >> >> >> >> >> > >> dcunningham@xxxxxxxxxxxxx> написа: >> >> >> >> >> > >> >Hello, >> >> >> >> >> > >> > >> >> >> >> >> > >> >We're having an issue with a geo-replication >process >> >with >> >> >> >> >unusually >> >> >> >> >> > >> >high >> >> >> >> >> > >> >CPU use and giving "Entry not present on master. >> >Fixing >> >> >gfid >> >> >> >> >> > >mismatch >> >> >> >> >> > >> >in >> >> >> >> >> > >> >slave" errors. Can anyone help on this? >> >> >> >> >> > >> > >> >> >> >> >> > >> >We have 3 GlusterFS replica nodes (we'll call the >> >> >master), >> >> >> >> >which >> >> >> >> >> > >also >> >> >> >> >> > >> >push >> >> >> >> >> > >> >data to a remote server (slave) using >geo-replication. >> >> >This has >> >> >> >> >been >> >> >> >> >> > >> >running fine for a couple of months, but yesterday >one >> >of >> >> >the >> >> >> >> >master >> >> >> >> >> > >> >nodes >> >> >> >> >> > >> >started having unusually high CPU use. It's this >> >process: >> >> >> >> >> > >> > >> >> >> >> >> > >> >root@cafs30:/var/log/glusterfs# ps aux | grep 32048 >> >> >> >> >> > >> >root 32048 68.7 0.6 1843140 845756 ? Rl >> >02:51 >> >> >> >> >493:51 >> >> >> >> >> > >> >python2 >> >> >> >> >> > >> >> >> >>/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py >> >> >> >> >> > >worker >> >> >> >> >> > >> >gvol0 nvfs10::gvol0 --feedback-fd 15 --local-path >> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0 --local-node >cafs30 >> >> >> >> >--local-node-id >> >> >> >> >> > >> >b7521445-ee93-4fed-8ced-6a609fa8c7d4 --slave-id >> >> >> >> >> > >> >cdcdb210-839c-4306-a4dc-e696b165ed17 --rpc-fd >> >12,11,9,13 >> >> >> >> >> > >--subvol-num 1 >> >> >> >> >> > >> >--resource-remote nvfs30 --resource-remote-id >> >> >> >> >> > >> >1e698ccd-aeec-4ec4-96fe-383da8fc3b78 >> >> >> >> >> > >> > >> >> >> >> >> > >> >Here's what is being logged in >> >> >> >> >> > >> >> >> >> >> >> >> >>>>/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log: >> >> >> >> >> > >> > >> >> >> >> >> > >> >[2020-05-29 21:57:18.843524] I [master(worker >> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1470:crawl] >> >_GMaster: >> >> >slave's >> >> >> >> >time >> >> >> >> >> > >> > stime=(1590789408, 0) >> >> >> >> >> > >> >[2020-05-29 21:57:30.626172] I [master(worker >> >> >> >> >> > >> >> >> >> >> >> >> >>>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures] >> >> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid >> >> >mismatch in >> >> >> >> >> > >slave. >> >> >> >> >> > >> >Deleting the entry retry_count=1 >entry=({u'uid': >> >> >108, >> >> >> >> >u'gfid': >> >> >> >> >> > >> >u'7c0b75e5-d8b7-454f-8010-112d613c599e', u'gid': >117, >> >> >u'mode': >> >> >> >> >> > >33204, >> >> >> >> >> > >> >u'entry': >> >> >> >> >> > >> >> >> >>u'.gfid/c5422396-1578-4b50-a29d-315be2a9c5d8/00a859f7xxxx.cfg', >> >> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False, >> >> >> >> >u'gfid_mismatch': >> >> >> >> >> > >True, >> >> >> >> >> > >> >u'slave_name': None, u'slave_gfid': >> >> >> >> >> > >> >u'ec4b0ace-2ec4-4ea5-adbc-9f519b81917c', >> >> >u'name_mismatch': >> >> >> >> >False, >> >> >> >> >> > >> >u'dst': >> >> >> >> >> > >> >False}) >> >> >> >> >> > >> >[2020-05-29 21:57:30.627893] I [master(worker >> >> >> >> >> > >> >> >> >> >> >> >> >>>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures] >> >> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid >> >> >mismatch in >> >> >> >> >> > >slave. >> >> >> >> >> > >> >Deleting the entry retry_count=1 >entry=({u'uid': >> >> >108, >> >> >> >> >u'gfid': >> >> >> >> >> > >> >u'a4d52e40-2e2f-4885-be5f-65fe95a8ebd7', u'gid': >117, >> >> >u'mode': >> >> >> >> >> > >33204, >> >> >> >> >> > >> >u'entry': >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >>>>>>u'.gfid/f857c42e-22f1-4ce4-8f2e-13bdadedde45/polycom_00a859f7xxxx.cfg', >> >> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False, >> >> >> >> >u'gfid_mismatch': >> >> >> >> >> > >True, >> >> >> >> >> > >> >u'slave_name': None, u'slave_gfid': >> >> >> >> >> > >> >u'ece8da77-b5ea-45a7-9af7-7d4d8f55f74a', >> >> >u'name_mismatch': >> >> >> >> >False, >> >> >> >> >> > >> >u'dst': >> >> >> >> >> > >> >False}) >> >> >> >> >> > >> >[2020-05-29 21:57:30.629532] I [master(worker >> >> >> >> >> > >> >> >> >> >> >> >> >>>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures] >> >> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid >> >> >mismatch in >> >> >> >> >> > >slave. >> >> >> >> >> > >> >Deleting the entry retry_count=1 >entry=({u'uid': >> >> >108, >> >> >> >> >u'gfid': >> >> >> >> >> > >> >u'3c525ad8-aeb2-46b6-9c41-7fb4987916f8', u'gid': >117, >> >> >u'mode': >> >> >> >> >> > >33204, >> >> >> >> >> > >> >u'entry': >> >> >> >> >> > >> >> >> >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>>>>>u'.gfid/f857c42e-22f1-4ce4-8f2e-13bdadedde45/00a859f7xxxx-directory.xml', >> >> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False, >> >> >> >> >u'gfid_mismatch': >> >> >> >> >> > >True, >> >> >> >> >> > >> >u'slave_name': None, u'slave_gfid': >> >> >> >> >> > >> >u'06717b5a-d842-495d-bd25-aab9cd454490', >> >> >u'name_mismatch': >> >> >> >> >False, >> >> >> >> >> > >> >u'dst': >> >> >> >> >> > >> >False}) >> >> >> >> >> > >> >[2020-05-29 21:57:30.659123] I [master(worker >> >> >> >> >> > >> >> >> >>/nodirectwritedata/gluster/gvol0):942:handle_entry_failures] >> >> >> >> >> > >_GMaster: >> >> >> >> >> > >> >Sucessfully fixed entry ops with gfid mismatch >> >> >> >> >retry_count=1 >> >> >> >> >> > >> >[2020-05-29 21:57:30.659343] I [master(worker >> >> >> >> >> > >> >>/nodirectwritedata/gluster/gvol0):1194:process_change] >> >> >> >> >_GMaster: >> >> >> >> >> > >Retry >> >> >> >> >> > >> >original entries. count = 1 >> >> >> >> >> > >> >[2020-05-29 21:57:30.725810] I [master(worker >> >> >> >> >> > >> >>/nodirectwritedata/gluster/gvol0):1197:process_change] >> >> >> >> >_GMaster: >> >> >> >> >> > >> >Sucessfully fixed all entry ops with gfid mismatch >> >> >> >> >> > >> >[2020-05-29 21:57:31.747319] I [master(worker >> >> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1954:syncjob] >> >Syncer: >> >> >Sync >> >> >> >> >Time >> >> >> >> >> > >Taken >> >> >> >> >> > >> >duration=0.7409 num_files=18 job=1 >return_code=0 >> >> >> >> >> > >> > >> >> >> >> >> > >> >We've verified that the files like >> >> >polycom_00a859f7xxxx.cfg >> >> >> >> >referred >> >> >> >> >> > >to >> >> >> >> >> > >> >in >> >> >> >> >> > >> >the error do exist on the master nodes and slave. >> >> >> >> >> > >> > >> >> >> >> >> > >> >We found this bug fix: >> >> >> >> >> > >> >https://bugzilla.redhat.com/show_bug.cgi?id=1642865 >> >> >> >> >> > >> > >> >> >> >> >> > >> >However that fix went in 5.1, and we're running >5.12 >> >on >> >> >the >> >> >> >> >master >> >> >> >> >> > >> >nodes >> >> >> >> >> > >> >and slave. A couple of GlusterFS clients connected >to >> >the >> >> >> >> >master >> >> >> >> >> > >nodes >> >> >> >> >> > >> >are >> >> >> >> >> > >> >running 5.13. >> >> >> >> >> > >> > >> >> >> >> >> > >> >Would anyone have any suggestions? Thank you in >> >advance. >> >> >> >> >> > >> >> >> >> >> >> > ________ >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > Community Meeting Calendar: >> >> >> >> >> > >> >> >> >> >> > Schedule - >> >> >> >> >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC >> >> >> >> >> > Bridge: https://bluejeans.com/441850968 >> >> >> >> >> > >> >> >> >> >> > Gluster-users mailing list >> >> >> >> >> > Gluster-users@xxxxxxxxxxx >> >> >> >> >> > >https://lists.gluster.org/mailman/listinfo/gluster-users >> >> >> >> >> >> >> >> >> >> >> >> >> > >> >> >> > >> >> >> > >> >> >> > -- >> >> >> > David Cunningham, Voisonics Limited >> >> >> > http://voisonics.com/ >> >> >> > USA: +1 213 221 1092 >> >> >> > New Zealand: +64 (0)28 2558 3782 >> >> >> > ________ >> >> >> > >> >> >> > >> >> >> > >> >> >> > Community Meeting Calendar: >> >> >> > >> >> >> > Schedule - >> >> >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC >> >> >> > Bridge: https://bluejeans.com/441850968 >> >> >> > >> >> >> > Gluster-users mailing list >> >> >> > Gluster-users@xxxxxxxxxxx >> >> >> > https://lists.gluster.org/mailman/listinfo/gluster-users >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> sankarshan@xxxxxxxxx | TZ: UTC+0530 | +91 99606 03294 >> >> >> kadalu.io : Making it easy to provision storage in k8s! >> >> >> ________ >> >> >> >> >> >> >> >> >> >> >> >> Community Meeting Calendar: >> >> >> >> >> >> Schedule - >> >> >> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC >> >> >> Bridge: https://bluejeans.com/441850968 >> >> >> >> >> >> Gluster-users mailing list >> >> >> Gluster-users@xxxxxxxxxxx >> >> >> https://lists.gluster.org/mailman/listinfo/gluster-users >> >> >> >> >> >> ________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://bluejeans.com/441850968 Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
