Hey David,
Sadly I just have a feeling that on any brick there is a gfid mismatch, but I could be wrong.
As you have the gfid list, please check on all bricks (both master and slave) that the file exists (not the one in .gluster , but the real one) and it has the same gfid.
You can find the inode via ls and then run a find (don't forget the ionice) against the brick and that inode number.
Once you have the full path to the file , test:
- Mount with FUSE
- Check file exists ( no '??????' for permissions, size, etc) and can be manipulated (maybe 'touch' can be used ?)
- Find (on all replica sets ) the file and check the gfid
- Check for heals pending for that gfid
Best Regards,
Strahil Nikolov
На 10 юни 2020 г. 6:37:35 GMT+03:00, David Cunningham <dcunningham@xxxxxxxxxxxxx> написа:
>Hi Strahil,
>
>Thank you for that. Do you know if these "Stale file handle" errors on
>the
>geo-replication slave could be related?
>
>[2020-06-10 01:02:32.268989] E [MSGID: 109040]
>[dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba: failed to lookup the file
>on
>gvol0-dht [Stale file handle]
>[2020-06-10 01:02:32.269092] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434237: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.329280] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434251: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.387129] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434264: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.448838] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434277: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.507196] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434290: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.566033] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434303: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.625168] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434316: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.772442] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434329: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.832481] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434342: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>[2020-06-10 01:02:32.891835] W [fuse-bridge.c:897:fuse_attr_cbk]
>0-glusterfs-fuse: 7434403: STAT()
>/.gfid/d4265a0c-d881-48d8-8ca1-0920ab5ae9ba => -1 (Stale file handle)
>
>
>
>On Tue, 9 Jun 2020 at 16:31, Strahil Nikolov <hunter86_bg@xxxxxxxxx>
>wrote:
>
>> Hey David,
>>
>> Can you check the cpu usage in the sar on the rest of the cluster
>(going
>> backwards from the day you found the high cpu usage), so we can know
>if
>> this behaviour was obseerved on other nodes.
>>
>> Maybe that behaviour was "normal" for the push node (which could be
>> another one) .
>>
>> As this script is python, I guess you can put some debug print
>> statements in it.
>>
>> Best Regards,
>> Strahil Nikolov
>>
>> На 9 юни 2020 г. 5:07:11 GMT+03:00, David Cunningham <
>> dcunningham@xxxxxxxxxxxxx> написа:
>> >Hi Sankarshan,
>> >
>> >Thanks for that. So what should we look for to figure out what this
>> >process
>> >is doing? In
>> >/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log we
>see
>> >something like the following logged regularly:
>> >
>> >
>> >[[2020-06-09 02:01:19.670595] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):1454:changelogs_batch_process]
>> >_GMaster:
>> >processing changes
>>
>>
>>batch=['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040',
>>
>>
>>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055']
>> >[2020-06-09 02:01:19.674927] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):1289:process] _GMaster: processing
>> >change
>> >
>>
>>
>>changelog=/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040
>> >[2020-06-09 02:01:19.683098] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):1170:process_change] _GMaster:
>> >entries: []
>> >[2020-06-09 02:01:19.695125] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):312:a_syncdata] _GMaster: files
>> >files=set(['.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17',
>> >'.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77',
>> >'.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0',
>> >'.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435'])
>> >[2020-06-09 02:01:19.695344] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
>candidate
>> >for
>> >syncing file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
>> >[2020-06-09 02:01:19.695508] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
>candidate
>> >for
>> >syncing file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
>> >[2020-06-09 02:01:19.695638] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
>candidate
>> >for
>> >syncing file=.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0
>> >[2020-06-09 02:01:19.695759] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
>candidate
>> >for
>> >syncing file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
>> >[2020-06-09 02:01:19.695883] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):1289:process] _GMaster: processing
>> >change
>> >
>>
>>
>>changelog=/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055
>> >[2020-06-09 02:01:19.696170] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):1170:process_change] _GMaster:
>> >entries: []
>> >[2020-06-09 02:01:19.714097] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):312:a_syncdata] _GMaster: files
>> >files=set(['.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17',
>> >'.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77',
>> >'.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435'])
>> >[2020-06-09 02:01:19.714286] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
>candidate
>> >for
>> >syncing file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
>> >[2020-06-09 02:01:19.714433] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
>candidate
>> >for
>> >syncing file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
>> >[2020-06-09 02:01:19.714577] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):315:a_syncdata] _GMaster:
>candidate
>> >for
>> >syncing file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
>> >[2020-06-09 02:01:20.179656] D [resource(worker
>> >/nodirectwritedata/gluster/gvol0):1419:rsync] SSH: files:
>> >.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17,
>> >.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77,
>> >.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0,
>> >.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435,
>> >.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17,
>> >.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77,
>> >.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
>> >[2020-06-09 02:01:20.738632] I [master(worker
>> >/nodirectwritedata/gluster/gvol0):1954:syncjob] Syncer: Sync Time
>Taken
>> >duration=0.5588 num_files=7 job=2 return_code=0
>> >[2020-06-09 02:01:20.739650] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
>> > file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
>> >[2020-06-09 02:01:20.740041] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
>> > file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
>> >[2020-06-09 02:01:20.740200] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
>> > file=.gfid/779cd2b3-1571-446a-8903-48d6183d3dd0
>> >[2020-06-09 02:01:20.740343] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
>> > file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
>> >[2020-06-09 02:01:20.740482] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
>> > file=.gfid/0f98f9cd-1800-4c0f-b449-edcd7446bf17
>> >[2020-06-09 02:01:20.740616] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
>> > file=.gfid/512b4710-5af7-4e5a-8f3a-0a3dece42f77
>> >[2020-06-09 02:01:20.740741] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):321:regjob] _GMaster: synced
>> > file=.gfid/8ae32eec-f766-4cd9-a788-4561ba1fa435
>> >[2020-06-09 02:01:20.745385] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
>> >22499:140085349934848:1591668080.75
>>
>>
>>done('/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668040',)
>> >...
>> >[2020-06-09 02:01:20.746252] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
>> >22499:140085349934848:1591668080.75 done -> None
>> >[2020-06-09 02:01:20.746515] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
>> >22499:140085349934848:1591668080.75
>>
>>
>>done('/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668055',)
>> >...
>> >[2020-06-09 02:01:20.747045] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
>> >22499:140085349934848:1591668080.75 done -> None
>> >[2020-06-09 02:01:31.364780] I [gsyncd(config-get):308:main] <top>:
>> >Using
>> >session config file
>>
>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >[2020-06-09 02:01:31.458915] I [gsyncd(status):308:main] <top>:
>Using
>> >session config file
>>
>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >[2020-06-09 02:01:32.156028] I [gsyncd(config-get):308:main] <top>:
>> >Using
>> >session config file
>>
>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >[2020-06-09 02:01:32.250082] I [gsyncd(status):308:main] <top>:
>Using
>> >session config file
>>
>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >[2020-06-09 02:01:33.778866] I [master(worker
>> >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster: Entry Time
>> >Taken
>> > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0 CRE=0
>> >duration=0.0000 UNL=0
>> >[2020-06-09 02:01:33.779000] I [master(worker
>> >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
>Data/Metadata
>> >Time Taken SETA=0 SETX=0 meta_duration=0.0000
>> > data_duration=14.0839 DATA=11 XATT=0
>> >[2020-06-09 02:01:33.779195] I [master(worker
>> >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster: Batch
>> >Completed
>> >changelog_end=1591668055 entry_stime=(1591668024, 0)
>> >changelog_start=1591668040 stime=(1591668054, 0)
>> >duration=14.1043
>> > num_changelogs=2 mode=live_changelog
>> >[2020-06-09 02:01:35.337511] I [gsyncd(config-get):308:main] <top>:
>> >Using
>> >session config file
>>
>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >[2020-06-09 02:01:35.432674] I [gsyncd(status):308:main] <top>:
>Using
>> >session config file
>>
>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >[2020-06-09 02:01:38.784449] D [master(worker
>> >/nodirectwritedata/gluster/gvol0):551:crawlwrap] _GMaster: ... crawl
>> >#18195
>> >done, took 32.533401 seconds
>> >[2020-06-09 02:01:38.790709] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
>> >22499:140085349934848:1591668098.79 scan() ...
>> >[2020-06-09 02:01:38.791342] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
>> >22499:140085349934848:1591668098.79 scan -> None
>> >[2020-06-09 02:01:38.791479] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
>> >22499:140085349934848:1591668098.79 getchanges() ...
>> >[2020-06-09 02:01:38.791989] D [repce(worker
>> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient: call
>> >22499:140085349934848:1591668098.79 getchanges ->
>>
>>
>>['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668069',
>>
>>
>>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668083',
>>
>>
>>'/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591668097']
>> >[2020-06-09 02:01:38.792114] I [master(worker
>> >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster: slave's time
>> > stime=(1591668054, 0)
>> >
>> >Something very similar is logged around every 32 seconds, and I
>notice
>> >the
>> >log above says the crawl took 32 seconds.
>> >
>> >
>> >On Mon, 8 Jun 2020 at 16:22, sankarshan <sankarshan@xxxxxxxxx>
>wrote:
>> >
>> >> Reading through the thread it occurs to me that it would be a
>> >stronger
>> >> approach to understand the workload (a general description of the
>> >> application) and in terms of the releases of GlusterFS running,
>> >assess
>> >> if there are new issues to be addressed or if existing sets of
>> >patches
>> >> tend to work. Thanks for setting up the debug level in the log.
>High
>> >> CPU usage by a geo-replication process would need to be traced
>back
>> >to
>> >> why it really requires that %-age of CPU if it was not doing so
>> >> previously.
>> >>
>> >> On Mon, 8 Jun 2020 at 05:29, David Cunningham
>> ><dcunningham@xxxxxxxxxxxxx>
>> >> wrote:
>> >> >
>> >> > Hi Strahil,
>> >> >
>> >> > The CPU is still quite high, with "top" regularly showing 100%
>CPU
>> >usage
>> >> by that process. However it's not clear whether this is really a
>> >problem,
>> >> or if it's just normal geo-replication activity. While CPU usage
>was
>> >not
>> >> previously as high on this server, it's not clear whether
>GlusterFS
>> >might
>> >> have made this the "push" node for geo-replication when it used to
>be
>> >some
>> >> other server. Having said that, no other server shows a sudden
>drop
>> >in CPU
>> >> usage.
>> >> >
>> >> > Ideally we could find out what the gsyncd process is doing, and
>> >> therefore whether it's expected or not. Any ideas on that? We did
>set
>> >the
>> >> log level to DEBUG as Sunny suggested.
>> >> >
>> >> > Looking at
>> >>
>>
>>
>>/var/log/glusterfs/geo-replication-slaves/gvol0_nvfs10_gvol0/mnt-cafs30-nodirectwritedata-gluster-gvol0.log
>> >> on the geo-replication slave, we have a lot of lines like the
>> >following
>> >> logged.
>> >> >
>> >> > [2020-06-06 00:32:43.155856] W [fuse-bridge.c:897:fuse_attr_cbk]
>> >> 0-glusterfs-fuse: 875853: STAT()
>> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file
>handle)
>> >> > [2020-06-06 00:32:43.219759] W [fuse-bridge.c:897:fuse_attr_cbk]
>> >> 0-glusterfs-fuse: 875923: STAT()
>> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file
>handle)
>> >> > [2020-06-06 00:32:43.280357] W [fuse-bridge.c:897:fuse_attr_cbk]
>> >> 0-glusterfs-fuse: 876001: STAT()
>> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac => -1 (Stale file
>handle)
>> >> > The message "E [MSGID: 109040]
>> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
>> >> /.gfid/25d78a6c-41a9-4364-84a8-31f5571223ac: failed to lookup the
>> >file on
>> >> gvol0-dht [Stale file handle]" repeated 9 times between
>[2020-06-06
>> >> 00:32:42.689780] and [2020-06-06 00:32:43.280322]
>> >> > [2020-06-06 09:03:03.660956] E [MSGID: 109040]
>> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
>> >> /.gfid/decdd552-d58b-4ddf-b27a-0da9a6fbc38b: failed to lookup the
>> >file on
>> >> gvol0-dht [Stale file handle]
>> >> > [2020-06-06 09:03:03.661057] W [fuse-bridge.c:897:fuse_attr_cbk]
>> >> 0-glusterfs-fuse: 965375: STAT()
>> >> /.gfid/decdd552-d58b-4ddf-b27a-0da9a6fbc38b => -1 (Stale file
>handle)
>> >> > [2020-06-06 09:03:10.258798] E [MSGID: 109040]
>> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
>> >> /.gfid/1d90e129-d40f-4ca4-bea8-0bb3c4c7985a: failed to lookup the
>> >file on
>> >> gvol0-dht [Stale file handle]
>> >> > [2020-06-06 09:03:10.258880] W [fuse-bridge.c:897:fuse_attr_cbk]
>> >> 0-glusterfs-fuse: 969455: STAT()
>> >> /.gfid/1d90e129-d40f-4ca4-bea8-0bb3c4c7985a => -1 (Stale file
>handle)
>> >> > [2020-06-06 09:09:41.259362] E [MSGID: 109040]
>> >> [dht-helper.c:1332:dht_migration_complete_check_task] 0-gvol0-dht:
>> >> /.gfid/740efff6-74dd-45be-847f-66919d1179e0: failed to lookup the
>> >file on
>> >> gvol0-dht [Stale file handle]
>> >> > [2020-06-06 09:09:41.259458] W [fuse-bridge.c:897:fuse_attr_cbk]
>> >> 0-glusterfs-fuse: 1040904: STAT()
>> >> /.gfid/740efff6-74dd-45be-847f-66919d1179e0 => -1 (Stale file
>handle)
>> >> >
>> >> > Could these errors be part of the problem?
>> >> >
>> >> > Thanks again.
>> >> >
>> >> >
>> >> > On Sat, 6 Jun 2020 at 21:21, Strahil Nikolov
>> ><hunter86_bg@xxxxxxxxx>
>> >> wrote:
>> >> >>
>> >> >> Hey David,
>> >> >>
>> >> >> can you check the old logs for gfid mismatch and get a list of
>> >files
>> >> that were causing the high cpu .
>> >> >> Maybe they are related somehow (maybe created by the same
>> >software
>> >> , same client version or something else) which could help about
>> >that.
>> >> >>
>> >> >> Also take a look in geo-replication-slave logs.
>> >> >>
>> >> >> Does the issue still occurs ?
>> >> >>
>> >> >> Best Regards,
>> >> >> Strahil Nikolov
>> >> >>
>> >> >> На 6 юни 2020 г. 1:21:55 GMT+03:00, David Cunningham <
>> >> dcunningham@xxxxxxxxxxxxx> написа:
>> >> >> >Hi Sunny and Strahil,
>> >> >> >
>> >> >> >Thanks again for your responses. We don't have a lot of
>renaming
>> >> >> >activity -
>> >> >> >maybe some, but not a lot. We do have files which are open for
>> >writing
>> >> >> >for
>> >> >> >quite a while - they're call recordings being written as the
>call
>> >> >> >happens.
>> >> >> >
>> >> >> >We've installed GlusterFS using the Ubuntu packages and I'd
>> >really like
>> >> >> >to
>> >> >> >avoid compiling and applying patches.
>> >> >> >
>> >> >> >After enabling DEBUG the log at
>> >> >>
>>/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log
>> >> >> >doesn't
>> >> >> >seem to show anything very unusual:
>> >> >> >
>> >> >> >[2020-06-03 02:49:01.992177] I [master(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster:
>Entry
>> >Time
>> >> >> >Taken
>> >> >> > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0CRE=0
>> >duration=0.0000
>> >> >> >UNL=0
>> >> >> >[2020-06-03 02:49:01.992465] I [master(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
>> >Data/Metadata
>> >> >> >Time Taken SETA=0 SETX=0
>> >> >> >meta_duration=0.0000data_duration=13.0954
>> >> >> > DATA=8 XATT=0
>> >> >> >[2020-06-03 02:49:01.992863] I [master(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster:
>Batch
>> >> >> >Completed
>> >> >> >changelog_end=1591152508 entry_stime=(1591152352, 0)
>> >> >> >changelog_start=1591152494 stime=(1591152507, 0)
>> >> >> >duration=13.1077
>> >> >> > num_changelogs=2 mode=live_changelog
>> >> >> >[2020-06-03 02:49:02.958687] D [repce(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
>> >> >> >19017:139678812452608:1591152542.96 keep_alive({'version': (1,
>> >0),
>> >> >> >'retval': 0, 'uuid': '8ee85fae-f3aa-4285-ad48-67a1dc17ed73',
>> >'timeout':
>> >> >> >1591152662, 'volume_mark': (1583043396, 161632)},) ...
>> >> >> >[2020-06-03 02:49:02.979139] D [repce(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient:
>call
>> >> >> >19017:139678812452608:1591152542.96 keep_alive -> 28
>> >> >> >[2020-06-03 02:49:06.998127] D [master(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):551:crawlwrap] _GMaster: ...
>> >crawl
>> >> >> >#114
>> >> >> >done, took 30.180089 seconds
>> >> >> >[2020-06-03 02:49:07.10132] D [repce(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
>> >> >> >19017:139679441716992:1591152547.01 scan() ...
>> >> >> >[2020-06-03 02:49:07.10781] D [repce(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient:
>call
>> >> >> >19017:139679441716992:1591152547.01 scan -> None
>> >> >> >[2020-06-03 02:49:07.10935] D [repce(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):196:push] RepceClient: call
>> >> >> >19017:139679441716992:1591152547.01 getchanges() ...
>> >> >> >[2020-06-03 02:49:07.11579] D [repce(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):216:__call__] RepceClient:
>call
>> >> >> >19017:139679441716992:1591152547.01 getchanges ->
>> >> >>
>> >>
>>
>>
>>>['/var/lib/misc/gluster/gsyncd/gvol0_nvfs10_gvol0/nodirectwritedata-gluster-gvol0/.processing/CHANGELOG.1591152522']
>> >> >> >[2020-06-03 02:49:07.11720] I [master(worker
>> >> >> >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster:
>slave's
>> >time
>> >> >> >stime=(1591152507, 0)
>> >> >> >
>> >> >> >Am I looking in the right place to find out what that
>gsyncd.py
>> >process
>> >> >> >is
>> >> >> >doing?
>> >> >> >
>> >> >> >
>> >> >> >On Tue, 2 Jun 2020 at 21:58, Sunny Kumar <sunkumar@xxxxxxxxxx>
>> >wrote:
>> >> >> >
>> >> >> >> Hi David,
>> >> >> >>
>> >> >> >> You haven't answered my previous question regarding the type
>of
>> >your
>> >> >> >> workload.
>> >> >> >> ---
>> >> >> >> You can use the below command to enable debug log.
>> >> >> >>
>> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol>
>config
>> >> >> >log-level
>> >> >> >> DEBUG`
>> >> >> >>
>> >> >> >> and after capturing log again switch back to info mode:
>> >> >> >>
>> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol>
>config
>> >> >> >log-level
>> >> >> >> INFO`
>> >> >> >>
>> >> >> >> Please share the debug log and geo-rep config to debug
>further:
>> >> >> >> for config:
>> >> >> >>
>> >> >> >> `gluster vol geo-rep <mastervol> <slavehost>::<slavevol>
>> >config`
>> >> >> >>
>> >> >> >> /sunny
>> >> >> >>
>> >> >> >>
>> >> >> >> On Tue, Jun 2, 2020 at 10:18 AM Strahil Nikolov
>> >> >> ><hunter86_bg@xxxxxxxxx>
>> >> >> >> wrote:
>> >> >> >> >
>> >> >> >> > Hi David,
>> >> >> >> >
>> >> >> >> > in which log do you see the entries ?
>> >> >> >> >
>> >> >> >> > I think I got an explanation why you see the process only
>on
>> >one
>> >> >> >of the
>> >> >> >> master nodes - geo-rep session is established from only 1
>> >master
>> >> >> >node /I
>> >> >> >> hope someone corrects me if I'm wrong/ to one slave node.
>Thus
>> >it
>> >> >> >will be
>> >> >> >> natural to see the high CPU usage on only 1 master node in
>> >your
>> >> >> >situation.
>> >> >> >> >
>> >> >> >> > Do you see anything else in the :
>> >> >> >> var/log/glusterfs/geo-replication/<logs> (master nodes) or
>in
>> >> >> >> /var/log/glusterfs/geo-replication-slaves (slaves) that
>could
>> >hint of
>> >> >> >the
>> >> >> >> exact issue. I have a vague feeling that that python script
>is
>> >> >> >constantly
>> >> >> >> looping over some data causing the CPU hog.
>> >> >> >> >
>> >> >> >> > Sadly, I can't find an instruction for increasing the log
>> >level of
>> >> >> >the
>> >> >> >> geo rep log .
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > Best Regards,
>> >> >> >> > Strahil Nikolov
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > На 2 юни 2020 г. 6:14:46 GMT+03:00, David Cunningham <
>> >> >> >> dcunningham@xxxxxxxxxxxxx> написа:
>> >> >> >> > >Hi Strahil and Sunny,
>> >> >> >> > >
>> >> >> >> > >Thank you for the replies. I checked the gfid on the
>master
>> >and
>> >> >> >slaves
>> >> >> >> > >and
>> >> >> >> > >they are the same. After moving the file away and back
>again
>> >it
>> >> >> >doesn't
>> >> >> >> > >seem to be having the issue with that file any more.
>> >> >> >> > >
>> >> >> >> > >We are still getting higher CPU usage on one of the
>master
>> >nodes
>> >> >> >than
>> >> >> >> > >the
>> >> >> >> > >others. It logs this every few seconds:
>> >> >> >> > >
>> >> >> >> > >[2020-06-02 03:10:15.637815] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster:
>> >Entry
>> >> >> >Time
>> >> >> >> > >Taken
>> >> >> >> > > MKD=0 MKN=0 LIN=0 SYM=0 REN=0 RMD=0CRE=0
>> >> >> >duration=0.0000
>> >> >> >> > >UNL=0
>> >> >> >> > >[2020-06-02 03:10:15.638010] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
>> >> >> >Data/Metadata
>> >> >> >> > >Time Taken SETA=0 SETX=0
>> >> >> >> > >meta_duration=0.0000data_duration=12.7878
>> >> >> >> > > DATA=4 XATT=0
>> >> >> >> > >[2020-06-02 03:10:15.638286] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster:
>> >Batch
>> >> >> >> > >Completed
>> >> >> >> > >changelog_end=1591067378 entry_stime=(1591067167,
>0)
>> >> >> >> > >changelog_start=1591067364 stime=(1591067377, 0)
>> >> >> >> > >duration=12.8068
>> >> >> >> > > num_changelogs=2 mode=live_changelog
>> >> >> >> > >[2020-06-02 03:10:20.658601] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster:
>> >slave's
>> >> >> >time
>> >> >> >> > > stime=(1591067377, 0)
>> >> >> >> > >[2020-06-02 03:10:34.21799] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1954:syncjob] Syncer:
>Sync
>> >Time
>> >> >> >Taken
>> >> >> >> > > duration=0.3826 num_files=8 job=1 return_code=0
>> >> >> >> > >[2020-06-02 03:10:46.440535] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1384:process] _GMaster:
>> >Entry
>> >> >> >Time
>> >> >> >> > >Taken
>> >> >> >> > > MKD=0 MKN=0 LIN=0 SYM=0 REN=1 RMD=0CRE=2
>> >> >> >duration=0.1314
>> >> >> >> > >UNL=1
>> >> >> >> > >[2020-06-02 03:10:46.440809] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1394:process] _GMaster:
>> >> >> >Data/Metadata
>> >> >> >> > >Time Taken SETA=0 SETX=0
>> >> >> >> > >meta_duration=0.0000data_duration=13.0171
>> >> >> >> > > DATA=14 XATT=0
>> >> >> >> > >[2020-06-02 03:10:46.441205] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1404:process] _GMaster:
>> >Batch
>> >> >> >> > >Completed
>> >> >> >> > >changelog_end=1591067420 entry_stime=(1591067419,
>0)
>> >> >> >> > >changelog_start=1591067392 stime=(1591067419, 0)
>> >> >> >> > >duration=13.0322
>> >> >> >> > > num_changelogs=3 mode=live_changelog
>> >> >> >> > >[2020-06-02 03:10:51.460925] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1470:crawl] _GMaster:
>> >slave's
>> >> >> >time
>> >> >> >> > > stime=(1591067419, 0)
>> >> >> >> > >
>> >> >> >> > >[2020-06-02 03:11:04.448913] I [master(worker
>> >> >> >> > >/nodirectwritedata/gluster/gvol0):1954:syncjob] Syncer:
>Sync
>> >Time
>> >> >> >Taken
>> >> >> >> > >duration=0.3466 num_files=3 job=1 return_code=0
>> >> >> >> > >
>> >> >> >> > >Whereas the other master nodes only log this:
>> >> >> >> > >
>> >> >> >> > >[2020-06-02 03:11:33.886938] I
>[gsyncd(config-get):308:main]
>> >> >> ><top>:
>> >> >> >> > >Using
>> >> >> >> > >session config file
>> >> >> >> >
>> >> >>
>>
>>>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >> >> >> > >[2020-06-02 03:11:33.993175] I [gsyncd(status):308:main]
>> ><top>:
>> >> >> >Using
>> >> >> >> > >session config file
>> >> >> >> >
>> >> >>
>>
>>>>path=/var/lib/glusterd/geo-replication/gvol0_nvfs10_gvol0/gsyncd.conf
>> >> >> >> > >
>> >> >> >> > >Can anyone help with what might cause the high CPU usage
>on
>> >one
>> >> >> >master
>> >> >> >> > >node? The process is this one, and is using 70-100% of
>CPU:
>> >> >> >> > >
>> >> >> >> > >python2
>> >> >>
>>/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py
>> >> >> >> > >worker gvol0 nvfs10::gvol0 --feedback-fd 15 --local-path
>> >> >> >> > >/nodirectwritedata/gluster/gvol0 --local-node cafs30
>> >> >> >--local-node-id
>> >> >> >> > >b7521445-ee93-4fed-8ced-6a609fa8c7d4 --slave-id
>> >> >> >> > >cdcdb210-839c-4306-a4dc-e696b165ed17 --rpc-fd 12,11,9,13
>> >> >> >--subvol-num 1
>> >> >> >> > >--resource-remote nvfs30 --resource-remote-id
>> >> >> >> > >1e698ccd-aeec-4ec4-96fe-383da8fc3b78
>> >> >> >> > >
>> >> >> >> > >Thank you in advance!
>> >> >> >> > >
>> >> >> >> > >
>> >> >> >> > >
>> >> >> >> > >
>> >> >> >> > >On Sat, 30 May 2020 at 20:20, Strahil Nikolov
>> >> >> ><hunter86_bg@xxxxxxxxx>
>> >> >> >> > >wrote:
>> >> >> >> > >
>> >> >> >> > >> Hey David,
>> >> >> >> > >>
>> >> >> >> > >> for me a gfid mismatch means that the file was
>> >> >> >replaced/recreated
>> >> >> >> > > -
>> >> >> >> > >> just like vim in linux does (and it is expected for
>> >config
>> >> >> >file).
>> >> >> >> > >>
>> >> >> >> > >> Have you checked the gfid of the file on both source
>> >and
>> >> >> >> > >destination,
>> >> >> >> > >> do they really match or they are different ?
>> >> >> >> > >>
>> >> >> >> > >> What happens when you move away the file from the
>slave
>> >,
>> >> >> >does it
>> >> >> >> > >fixes
>> >> >> >> > >> the issue ?
>> >> >> >> > >>
>> >> >> >> > >> Best Regards,
>> >> >> >> > >> Strahil Nikolov
>> >> >> >> > >>
>> >> >> >> > >> На 30 май 2020 г. 1:10:56 GMT+03:00, David Cunningham <
>> >> >> >> > >> dcunningham@xxxxxxxxxxxxx> написа:
>> >> >> >> > >> >Hello,
>> >> >> >> > >> >
>> >> >> >> > >> >We're having an issue with a geo-replication process
>with
>> >> >> >unusually
>> >> >> >> > >> >high
>> >> >> >> > >> >CPU use and giving "Entry not present on master.
>Fixing
>> >gfid
>> >> >> >> > >mismatch
>> >> >> >> > >> >in
>> >> >> >> > >> >slave" errors. Can anyone help on this?
>> >> >> >> > >> >
>> >> >> >> > >> >We have 3 GlusterFS replica nodes (we'll call the
>> >master),
>> >> >> >which
>> >> >> >> > >also
>> >> >> >> > >> >push
>> >> >> >> > >> >data to a remote server (slave) using geo-replication.
>> >This has
>> >> >> >been
>> >> >> >> > >> >running fine for a couple of months, but yesterday one
>of
>> >the
>> >> >> >master
>> >> >> >> > >> >nodes
>> >> >> >> > >> >started having unusually high CPU use. It's this
>process:
>> >> >> >> > >> >
>> >> >> >> > >> >root@cafs30:/var/log/glusterfs# ps aux | grep 32048
>> >> >> >> > >> >root 32048 68.7 0.6 1843140 845756 ? Rl
>02:51
>> >> >> >493:51
>> >> >> >> > >> >python2
>> >> >> >> > >>
>> >>/usr/lib/x86_64-linux-gnu/glusterfs/python/syncdaemon/gsyncd.py
>> >> >> >> > >worker
>> >> >> >> > >> >gvol0 nvfs10::gvol0 --feedback-fd 15 --local-path
>> >> >> >> > >> >/nodirectwritedata/gluster/gvol0 --local-node cafs30
>> >> >> >--local-node-id
>> >> >> >> > >> >b7521445-ee93-4fed-8ced-6a609fa8c7d4 --slave-id
>> >> >> >> > >> >cdcdb210-839c-4306-a4dc-e696b165ed17 --rpc-fd
>12,11,9,13
>> >> >> >> > >--subvol-num 1
>> >> >> >> > >> >--resource-remote nvfs30 --resource-remote-id
>> >> >> >> > >> >1e698ccd-aeec-4ec4-96fe-383da8fc3b78
>> >> >> >> > >> >
>> >> >> >> > >> >Here's what is being logged in
>> >> >> >> > >>
>> >> >>
>> >>>/var/log/glusterfs/geo-replication/gvol0_nvfs10_gvol0/gsyncd.log:
>> >> >> >> > >> >
>> >> >> >> > >> >[2020-05-29 21:57:18.843524] I [master(worker
>> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1470:crawl]
>_GMaster:
>> >slave's
>> >> >> >time
>> >> >> >> > >> > stime=(1590789408, 0)
>> >> >> >> > >> >[2020-05-29 21:57:30.626172] I [master(worker
>> >> >> >> > >>
>> >> >>
>> >>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures]
>> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid
>> >mismatch in
>> >> >> >> > >slave.
>> >> >> >> > >> >Deleting the entry retry_count=1 entry=({u'uid':
>> >108,
>> >> >> >u'gfid':
>> >> >> >> > >> >u'7c0b75e5-d8b7-454f-8010-112d613c599e', u'gid': 117,
>> >u'mode':
>> >> >> >> > >33204,
>> >> >> >> > >> >u'entry':
>> >> >> >> > >>
>> >>u'.gfid/c5422396-1578-4b50-a29d-315be2a9c5d8/00a859f7xxxx.cfg',
>> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False,
>> >> >> >u'gfid_mismatch':
>> >> >> >> > >True,
>> >> >> >> > >> >u'slave_name': None, u'slave_gfid':
>> >> >> >> > >> >u'ec4b0ace-2ec4-4ea5-adbc-9f519b81917c',
>> >u'name_mismatch':
>> >> >> >False,
>> >> >> >> > >> >u'dst':
>> >> >> >> > >> >False})
>> >> >> >> > >> >[2020-05-29 21:57:30.627893] I [master(worker
>> >> >> >> > >>
>> >> >>
>> >>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures]
>> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid
>> >mismatch in
>> >> >> >> > >slave.
>> >> >> >> > >> >Deleting the entry retry_count=1 entry=({u'uid':
>> >108,
>> >> >> >u'gfid':
>> >> >> >> > >> >u'a4d52e40-2e2f-4885-be5f-65fe95a8ebd7', u'gid': 117,
>> >u'mode':
>> >> >> >> > >33204,
>> >> >> >> > >> >u'entry':
>> >> >> >> > >>
>> >> >> >> >
>> >> >>
>> >>
>>
>>>>>u'.gfid/f857c42e-22f1-4ce4-8f2e-13bdadedde45/polycom_00a859f7xxxx.cfg',
>> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False,
>> >> >> >u'gfid_mismatch':
>> >> >> >> > >True,
>> >> >> >> > >> >u'slave_name': None, u'slave_gfid':
>> >> >> >> > >> >u'ece8da77-b5ea-45a7-9af7-7d4d8f55f74a',
>> >u'name_mismatch':
>> >> >> >False,
>> >> >> >> > >> >u'dst':
>> >> >> >> > >> >False})
>> >> >> >> > >> >[2020-05-29 21:57:30.629532] I [master(worker
>> >> >> >> > >>
>> >> >>
>> >>>/nodirectwritedata/gluster/gvol0):813:fix_possible_entry_failures]
>> >> >> >> > >> >_GMaster: Entry not present on master. Fixing gfid
>> >mismatch in
>> >> >> >> > >slave.
>> >> >> >> > >> >Deleting the entry retry_count=1 entry=({u'uid':
>> >108,
>> >> >> >u'gfid':
>> >> >> >> > >> >u'3c525ad8-aeb2-46b6-9c41-7fb4987916f8', u'gid': 117,
>> >u'mode':
>> >> >> >> > >33204,
>> >> >> >> > >> >u'entry':
>> >> >> >> > >>
>> >> >> >> >
>> >> >> >>
>> >> >>
>> >>
>>
>>
>>>>>u'.gfid/f857c42e-22f1-4ce4-8f2e-13bdadedde45/00a859f7xxxx-directory.xml',
>> >> >> >> > >> >u'op': u'CREATE'}, 17, {u'slave_isdir': False,
>> >> >> >u'gfid_mismatch':
>> >> >> >> > >True,
>> >> >> >> > >> >u'slave_name': None, u'slave_gfid':
>> >> >> >> > >> >u'06717b5a-d842-495d-bd25-aab9cd454490',
>> >u'name_mismatch':
>> >> >> >False,
>> >> >> >> > >> >u'dst':
>> >> >> >> > >> >False})
>> >> >> >> > >> >[2020-05-29 21:57:30.659123] I [master(worker
>> >> >> >> > >>
>> >>/nodirectwritedata/gluster/gvol0):942:handle_entry_failures]
>> >> >> >> > >_GMaster:
>> >> >> >> > >> >Sucessfully fixed entry ops with gfid mismatch
>> >> >> >retry_count=1
>> >> >> >> > >> >[2020-05-29 21:57:30.659343] I [master(worker
>> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1194:process_change]
>> >> >> >_GMaster:
>> >> >> >> > >Retry
>> >> >> >> > >> >original entries. count = 1
>> >> >> >> > >> >[2020-05-29 21:57:30.725810] I [master(worker
>> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1197:process_change]
>> >> >> >_GMaster:
>> >> >> >> > >> >Sucessfully fixed all entry ops with gfid mismatch
>> >> >> >> > >> >[2020-05-29 21:57:31.747319] I [master(worker
>> >> >> >> > >> >/nodirectwritedata/gluster/gvol0):1954:syncjob]
>Syncer:
>> >Sync
>> >> >> >Time
>> >> >> >> > >Taken
>> >> >> >> > >> >duration=0.7409 num_files=18 job=1 return_code=0
>> >> >> >> > >> >
>> >> >> >> > >> >We've verified that the files like
>> >polycom_00a859f7xxxx.cfg
>> >> >> >referred
>> >> >> >> > >to
>> >> >> >> > >> >in
>> >> >> >> > >> >the error do exist on the master nodes and slave.
>> >> >> >> > >> >
>> >> >> >> > >> >We found this bug fix:
>> >> >> >> > >> >https://bugzilla.redhat.com/show_bug.cgi?id=1642865
>> >> >> >> > >> >
>> >> >> >> > >> >However that fix went in 5.1, and we're running 5.12
>on
>> >the
>> >> >> >master
>> >> >> >> > >> >nodes
>> >> >> >> > >> >and slave. A couple of GlusterFS clients connected to
>the
>> >> >> >master
>> >> >> >> > >nodes
>> >> >> >> > >> >are
>> >> >> >> > >> >running 5.13.
>> >> >> >> > >> >
>> >> >> >> > >> >Would anyone have any suggestions? Thank you in
>advance.
>> >> >> >> > >>
>> >> >> >> > ________
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > Community Meeting Calendar:
>> >> >> >> >
>> >> >> >> > Schedule -
>> >> >> >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
>> >> >> >> > Bridge: https://bluejeans.com/441850968
>> >> >> >> >
>> >> >> >> > Gluster-users mailing list
>> >> >> >> > Gluster-users@xxxxxxxxxxx
>> >> >> >> > https://lists.gluster.org/mailman/listinfo/gluster-users
>> >> >> >>
>> >> >> >>
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > David Cunningham, Voisonics Limited
>> >> > http://voisonics.com/
>> >> > USA: +1 213 221 1092
>> >> > New Zealand: +64 (0)28 2558 3782
>> >> > ________
>> >> >
>> >> >
>> >> >
>> >> > Community Meeting Calendar:
>> >> >
>> >> > Schedule -
>> >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
>> >> > Bridge: https://bluejeans.com/441850968
>> >> >
>> >> > Gluster-users mailing list
>> >> > Gluster-users@xxxxxxxxxxx
>> >> > https://lists.gluster.org/mailman/listinfo/gluster-users
>> >>
>> >>
>> >>
>> >> --
>> >> sankarshan@xxxxxxxxx | TZ: UTC+0530 | +91 99606 03294
>> >> kadalu.io : Making it easy to provision storage in k8s!
>> >> ________
>> >>
>> >>
>> >>
>> >> Community Meeting Calendar:
>> >>
>> >> Schedule -
>> >> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
>> >> Bridge: https://bluejeans.com/441850968
>> >>
>> >> Gluster-users mailing list
>> >> Gluster-users@xxxxxxxxxxx
>> >> https://lists.gluster.org/mailman/listinfo/gluster-users
>> >>
>>
________
Community Meeting Calendar:
Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://bluejeans.com/441850968
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
