Dear Gluster Community,
I also have a issue concerning performance. The last days I updated our test cluster from GlusterFS v5.5 to v7.0 . The setup in general:
2 HP DL380 Servers with 10Gbit NICs, 1 Distribute-Replica 2 Volume with 2 Replica Pairs. Client is SMB Samba (access via vfs_glusterfs) . I did several tests to ensure that Samba don't causes the fall.
The setup ist completely the same except the Gluster Version
Here are my results:
64KiB 1MiB 10MiB (Filesize)
3,49 47,41 300,50
(Values in MiB/s with GlusterFS v5.5)
0,16 2,61 76,63 (Values in MiB/s with GlusterFS v7.0)
We use this volume options (GlusterFS 7.0):
Volume Name: archive1
Type: Distributed-Replicate
Volume ID: 44c17844-0bd4-4ca2-98d8-a1474add790c
Status: Started
Snapshot Count: 0
Number of Bricks: 2 x 2 = 4
Transport-type: tcp
Bricks:
Brick1: fs-dl380-c1-n1:/gluster/brick1/glusterbrick
Brick2: fs-dl380-c1-n2:/gluster/brick1/glusterbrick
Brick3: fs-dl380-c1-n1:/gluster/brick2/glusterbrick
Brick4: fs-dl380-c1-n2:/gluster/brick2/glusterbrick
Options Reconfigured:
performance.client-io-threads: off
nfs.disable: on
storage.fips-mode-rchecksum: on
transport.address-family: inet
user.smb: disable
features.read-only: off
features.worm: off
features.worm-file-level: on
features.retention-mode: enterprise
features.default-retention-period: 120
network.ping-timeout: 10
features.cache-invalidation: on
features.cache-invalidation-timeout: 600
performance.nl-cache: on
performance.nl-cache-timeout: 600
client.event-threads: 32
server.event-threads: 32
cluster.lookup-optimize: on
performance.stat-prefetch: on
performance.cache-invalidation: on
performance.md-cache-timeout: 600
performance.cache-samba-metadata: on
performance.cache-ima-xattrs: on
performance.io-thread-count: 64
cluster.use-compound-fops: on
performance.cache-size: 512MB
performance.cache-refresh-timeout: 10
performance.read-ahead: off
performance.write-behind-window-size: 4MB
performance.write-behind: on
storage.build-pgfid: on
features.ctime: on
cluster.quorum-type: fixed
cluster.quorum-count: 1
features.bitrot: on
features.scrub: Active
features.scrub-freq: daily
Type: Distributed-Replicate
Volume ID: 44c17844-0bd4-4ca2-98d8-a1474add790c
Status: Started
Snapshot Count: 0
Number of Bricks: 2 x 2 = 4
Transport-type: tcp
Bricks:
Brick1: fs-dl380-c1-n1:/gluster/brick1/glusterbrick
Brick2: fs-dl380-c1-n2:/gluster/brick1/glusterbrick
Brick3: fs-dl380-c1-n1:/gluster/brick2/glusterbrick
Brick4: fs-dl380-c1-n2:/gluster/brick2/glusterbrick
Options Reconfigured:
performance.client-io-threads: off
nfs.disable: on
storage.fips-mode-rchecksum: on
transport.address-family: inet
user.smb: disable
features.read-only: off
features.worm: off
features.worm-file-level: on
features.retention-mode: enterprise
features.default-retention-period: 120
network.ping-timeout: 10
features.cache-invalidation: on
features.cache-invalidation-timeout: 600
performance.nl-cache: on
performance.nl-cache-timeout: 600
client.event-threads: 32
server.event-threads: 32
cluster.lookup-optimize: on
performance.stat-prefetch: on
performance.cache-invalidation: on
performance.md-cache-timeout: 600
performance.cache-samba-metadata: on
performance.cache-ima-xattrs: on
performance.io-thread-count: 64
cluster.use-compound-fops: on
performance.cache-size: 512MB
performance.cache-refresh-timeout: 10
performance.read-ahead: off
performance.write-behind-window-size: 4MB
performance.write-behind: on
storage.build-pgfid: on
features.ctime: on
cluster.quorum-type: fixed
cluster.quorum-count: 1
features.bitrot: on
features.scrub: Active
features.scrub-freq: daily
For GlusterFS 5.5 its nearly the same except the fact that there were 2 options to enable ctime feature.
Our optimization for Samba looks like this (for every version):
[global]
workgroup = SAMBA
netbios name = CLUSTER
kernel share modes = no
aio read size = 1
aio write size = 1
kernel oplocks = no
max open files = 100000
nt acl support = no
security = user
server min protocol = SMB2
store dos attributes = no
strict locking = no
full_audit:failure = pwrite_send pwrite_recv pwrite offload_write_send offload_write_recv create_file open unlink connect disconnect rename chown fchown lchown chmod fchmod mkdir rmdir ntimes ftruncate fallocate
full_audit:success = pwrite_send pwrite_recv pwrite offload_write_send offload_write_recv create_file open unlink connect disconnect rename chown fchown lchown chmod fchmod mkdir rmdir ntimes ftruncate fallocate
full_audit:facility = local5
durable handles = yes
posix locking = no
log level = 2
max log size = 100000
debug pid = yes
workgroup = SAMBA
netbios name = CLUSTER
kernel share modes = no
aio read size = 1
aio write size = 1
kernel oplocks = no
max open files = 100000
nt acl support = no
security = user
server min protocol = SMB2
store dos attributes = no
strict locking = no
full_audit:failure = pwrite_send pwrite_recv pwrite offload_write_send offload_write_recv create_file open unlink connect disconnect rename chown fchown lchown chmod fchmod mkdir rmdir ntimes ftruncate fallocate
full_audit:success = pwrite_send pwrite_recv pwrite offload_write_send offload_write_recv create_file open unlink connect disconnect rename chown fchown lchown chmod fchmod mkdir rmdir ntimes ftruncate fallocate
full_audit:facility = local5
durable handles = yes
posix locking = no
log level = 2
max log size = 100000
debug pid = yes
What can be the cause for this rapid falling of the performance for small files? Are some of our vol options not recommended anymore?
There were some patches concerning performance for small files in v6.0 und v7.0 :
#1670031: performance regression seen with smallfile workload tests
________ Community Meeting Calendar: APAC Schedule - Every 2nd and 4th Tuesday at 11:30 AM IST Bridge: https://bluejeans.com/118564314 NA/EMEA Schedule - Every 1st and 3rd Tuesday at 01:00 PM EDT Bridge: https://bluejeans.com/118564314 Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
