Re: Upgrade to 4.1.2 geo-replication does not work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hi krishna,

I see no error in the shared logs. The only errro messages I see are during geo-rep stop. That is expected.
Could you share the steps you used to created geo-rep setup?

Thanks,
Kotresh HR

On Mon, Sep 3, 2018 at 1:02 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotesh,

 

Below is the cat output of gsyncd.log file generating on my master server.

 

And I am using 4.1.3 version only all my gluster nodes.

[root@gluster-poc-noida distvol]# gluster --version | grep glusterfs

glusterfs 4.1.3

 

 

[root@gluster-poc-noida distvol]# cat /var/log/glusterfs/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.log

[2018-09-03 04:01:52.424609] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 04:01:52.526323] I [gsyncd(status):297:main] <top>: Using session config file       path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:55:41.326411] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:55:49.676120] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:55:50.406042] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:56:52.847537] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:57:03.778448] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:57:25.86958] I [gsyncd(config-get):297:main] <top>: Using session config file    path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:57:25.855273] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:58:09.294239] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:59:39.255487] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 06:59:39.355753] I [gsyncd(status):297:main] <top>: Using session config file       path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:00:26.311767] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:03:29.205226] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:03:30.131258] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:10:34.679677] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:10:35.653928] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:26:24.438854] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:26:25.495117] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:26.159113] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:26.216475] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:26.932451] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:26.988286] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:26.992789] E [syncdutils(worker /data/gluster-dist/distvol):305:log_raise_exception] <top>: connection to peer is broken

[2018-09-03 07:27:26.994750] E [syncdutils(worker /data/gluster-dist/distvol):801:errlog] Popen: command returned error cmd=ssh -oPasswordAuthentication=no -oStrictHostKeyChecking=no -i /var/lib/glusterd/geo-replication/secret.pem -p 22 -oControlMaster=auto -S /tmp/gsyncd-aux-ssh-X8iHv1/86bcbaf188167a3859c3267081671312.sock gluster-poc-sj /nonexistent/gsyncd slave glusterdist gluster-poc-sj::glusterdist --master-node gluster-poc-noida --master-node-id 098c16c6-8dff-490a-a2e8-c8cb328fcbb3 --master-brick /data/gluster-dist/distvol --local-node gluster-poc-sj --local-node-id e54f2759-4c56-40dd-89e1-e10c3037d48b --slave-timeout 120 --slave-log-level INFO --slave-gluster-log-level INFO --slave-gluster-command-dir /usr/local/sbin/       error=255

[2018-09-03 07:27:26.994971] E [syncdutils(worker /data/gluster-dist/distvol):805:logerr] Popen: ssh> Killed by signal 15.

[2018-09-03 07:27:27.7174] I [repce(agent /data/gluster-dist/distvol):80:service_loop] RepceServer: terminating on reaching EOF.

[2018-09-03 07:27:27.15156] I [gsyncdstatus(monitor):244:set_worker_status] GeorepStatus: Worker Status Change  status=Faulty

[2018-09-03 07:27:28.52725] I [gsyncd(monitor-status):297:main] <top>: Using session config file        path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:28.64521] I [subcmds(monitor-status):19:subcmd_monitor_status] <top>: Monitor Status Change   status=Stopped

[2018-09-03 07:27:35.345937] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:35.444247] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:36.181122] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:36.281459] I [gsyncd(monitor):297:main] <top>: Using session config file      path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:39.782480] I [gsyncdstatus(monitor):244:set_worker_status] GeorepStatus: Worker Status Change status=Initializing...

[2018-09-03 07:27:40.321157] I [monitor(monitor):158:monitor] Monitor: starting gsyncd worker   brick=/data/gluster-dist/distvol        slave_node=gluster-poc-sj

[2018-09-03 07:27:40.376172] I [gsyncd(agent /data/gluster-dist/distvol):297:main] <top>: Using session config file     path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:40.377144] I [changelogagent(agent /data/gluster-dist/distvol):72:__init__] ChangelogAgent: Agent listining...

[2018-09-03 07:27:40.378150] I [gsyncd(worker /data/gluster-dist/distvol):297:main] <top>: Using session config file    path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:40.391185] I [resource(worker /data/gluster-dist/distvol):1377:connect_remote] SSH: Initializing SSH connection between master and slave...

[2018-09-03 07:27:43.752819] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:43.848619] I [gsyncd(status):297:main] <top>: Using session config file       path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:45.365627] I [resource(worker /data/gluster-dist/distvol):1424:connect_remote] SSH: SSH connection between master and slave established.       duration=4.9743

[2018-09-03 07:27:45.365866] I [resource(worker /data/gluster-dist/distvol):1096:connect] GLUSTER: Mounting gluster volume locally...

[2018-09-03 07:27:46.388974] I [resource(worker /data/gluster-dist/distvol):1119:connect] GLUSTER: Mounted gluster volume       duration=1.0230

[2018-09-03 07:27:46.389206] I [subcmds(worker /data/gluster-dist/distvol):70:subcmd_worker] <top>: Worker spawn successful. Acknowledging back to monitor

[2018-09-03 07:27:48.401196] I [master(worker /data/gluster-dist/distvol):1593:register] _GMaster: Working dir  path=/var/lib/misc/gluster/gsyncd/glusterdist_gluster-poc-sj_glusterdist/data-gluster-dist-distvol

[2018-09-03 07:27:48.401477] I [resource(worker /data/gluster-dist/distvol):1282:service_loop] GLUSTER: Register time   time=1535959668

[2018-09-03 07:27:49.176095] I [gsyncdstatus(worker /data/gluster-dist/distvol):277:set_active] GeorepStatus: Worker Status Change      status=Active

[2018-09-03 07:27:49.177079] I [gsyncdstatus(worker /data/gluster-dist/distvol):249:set_worker_crawl_status] GeorepStatus: Crawl Status Change  status=History Crawl

[2018-09-03 07:27:49.177339] I [master(worker /data/gluster-dist/distvol):1507:crawl] _GMaster: starting history crawl  turns=1 stime=(1535701378, 0)    entry_stime=(1535701378, 0)     etime=1535959669

[2018-09-03 07:27:50.179210] I [master(worker /data/gluster-dist/distvol):1536:crawl] _GMaster: slave's time    stime=(1535701378, 0)

[2018-09-03 07:27:51.300096] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:51.399027] I [gsyncd(status):297:main] <top>: Using session config file       path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:27:52.510271] I [master(worker /data/gluster-dist/distvol):1944:syncjob] Syncer: Sync Time Taken duration=1.6146 num_files=1     job=2    return_code=0

[2018-09-03 07:27:52.514487] I [master(worker /data/gluster-dist/distvol):1374:process] _GMaster: Entry Time Taken      MKD=0   MKN=0   LIN=0   SYM=0    REN=1   RMD=0   CRE=0   duration=0.2745 UNL=0

[2018-09-03 07:27:52.514615] I [master(worker /data/gluster-dist/distvol):1384:process] _GMaster: Data/Metadata Time Taken      SETA=1  SETX=0  meta_duration=0.2691     data_duration=1.7883    DATA="" XATT=0

[2018-09-03 07:27:52.514844] I [master(worker /data/gluster-dist/distvol):1394:process] _GMaster: Batch Completed       changelog_end=1535701379entry_stime=(1535701378, 0)      changelog_start=1535701379      stime=(1535701378, 0)   duration=2.3353 num_changelogs=1        mode=history_changelog

[2018-09-03 07:27:52.515224] I [master(worker /data/gluster-dist/distvol):1552:crawl] _GMaster: finished history crawl  endtime=1535959662      stime=(1535701378, 0)    entry_stime=(1535701378, 0)

[2018-09-03 07:28:01.706876] I [gsyncd(config-get):297:main] <top>: Using session config file   path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:28:01.803858] I [gsyncd(status):297:main] <top>: Using session config file       path=/var/lib/glusterd/geo-replication/glusterdist_gluster-poc-sj_glusterdist/gsyncd.conf

[2018-09-03 07:28:03.521949] I [master(worker /data/gluster-dist/distvol):1507:crawl] _GMaster: starting history crawl  turns=2 stime=(1535701378, 0)    entry_stime=(1535701378, 0)     etime=1535959683

[2018-09-03 07:28:03.523086] I [master(worker /data/gluster-dist/distvol):1552:crawl] _GMaster: finished history crawl  endtime=1535959677      stime=(1535701378, 0)    entry_stime=(1535701378, 0)

[2018-09-03 07:28:04.62274] I [gsyncdstatus(worker /data/gluster-dist/distvol):249:set_worker_crawl_status] GeorepStatus: Crawl Status Change   status=Changelog Crawl

[root@gluster-poc-noida distvol]#

 

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Monday, September 3, 2018 12:44 PM


To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

Hi Krishna,

The log is not complete. If you are re-trying, could you please try it out on 4.1.3 and share the logs.

Thanks,

Kotresh HR

 

On Mon, Sep 3, 2018 at 12:42 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotresh,

 

Please find the log files attached.

 

Request you to please have a look.

 

/Krishna

 

 

 

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Monday, September 3, 2018 10:19 AM


To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

Hi Krishna,

Indexing is the feature used by Hybrid crawl which only makes crawl faster. It has nothing to do with missing data sync.

Could you please share the complete log file of the session where the issue is encountered ?

Thanks,

Kotresh HR

 

On Mon, Sep 3, 2018 at 9:33 AM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotresh/Support,

 

Request your help to get it fix. My slave is not getting sync with master. When I restart the session after doing the indexing off then only it shows the file at slave but that is also blank with zero size.

 

At master: file size is 5.8 GB.

 

[root@gluster-poc-noida distvol]# du -sh 17.10.v001.20171023-201021_17020_GPLV3.tar.gz

5.8G    17.10.v001.20171023-201021_17020_GPLV3.tar.gz

[root@gluster-poc-noida distvol]#

 

But at slave, after doing the “indexing off” and restart the session and then wait for 2 days. It shows only 4.9 GB copied.

 

[root@gluster-poc-sj distvol]# du -sh 17.10.v001.20171023-201021_17020_GPLV3.tar.gz

4.9G    17.10.v001.20171023-201021_17020_GPLV3.tar.gz

[root@gluster-poc-sj distvol]#

 

Similarly, I tested for small file of size 1.2 GB only that is still showing “0” size at slave  after days waiting time.

 

At Master:

 

[root@gluster-poc-noida distvol]# du -sh rflowTestInt18.08-b001.t.Z

1.2G    rflowTestInt18.08-b001.t.Z

[root@gluster-poc-noida distvol]#

 

At Slave:

 

[root@gluster-poc-sj distvol]# du -sh rflowTestInt18.08-b001.t.Z

0       rflowTestInt18.08-b001.t.Z

[root@gluster-poc-sj distvol]#

 

Below is my distributed volume info :

 

[root@gluster-poc-noida distvol]# gluster volume info glusterdist

 

Volume Name: glusterdist

Type: Distribute

Volume ID: af5b2915-7170-4b5e-aee8-7e68757b9bf1

Status: Started

Snapshot Count: 0

Number of Bricks: 2

Transport-type: tcp

Bricks:

Brick1: gluster-poc-noida:/data/gluster-dist/distvol

Brick2: noi-poc-gluster:/data/gluster-dist/distvol

Options Reconfigured:

changelog.changelog: on

geo-replication.ignore-pid-check: on

geo-replication.indexing: on

transport.address-family: inet

nfs.disable: on

[root@gluster-poc-noida distvol]#

 

Please help to fix, I believe its not a normal behavior of gluster rsync.

 

/Krishna

From: Krishna Verma
Sent: Friday, August 31, 2018 12:42 PM
To: 'Kotresh Hiremath Ravishankar' <khiremat@xxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: RE: Upgrade to 4.1.2 geo-replication does not work

 

Hi Kotresh,

 

I have tested the geo replication over distributed volumes with 2*2 gluster setup.

 

[root@gluster-poc-noida ~]# gluster volume geo-replication glusterdist gluster-poc-sj::glusterdist status

 

MASTER NODE          MASTER VOL     MASTER BRICK                  SLAVE USER    SLAVE                          SLAVE NODE         STATUS    CRAWL STATUS       LAST_SYNCED

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

gluster-poc-noida    glusterdist    /data/gluster-dist/distvol    root          gluster-poc-sj::glusterdist    gluster-poc-sj     Active    Changelog Crawl    2018-08-31 10:28:19

noi-poc-gluster      glusterdist    /data/gluster-dist/distvol    root          gluster-poc-sj::glusterdist    gluster-poc-sj2    Active    History Crawl      N/A

[root@gluster-poc-noida ~]#

 

Not at client I copied a 848MB file from local disk to master mounted volume and it took only 1 minute and 15 seconds. Its great….

 

But even after waited for 2 hrs I was unable to see that file at slave site. Then I again erased the indexing by doing “gluster volume set glusterdist  indexing off” and restart the session. Magically I received the file instantly at slave after doing this.

 

Why I need to do “indexing off” every time to reflect data at slave site? Is there any fix/workaround of it?

 

/Krishna

 

 

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Friday, August 31, 2018 10:10 AM
To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

 

 

On Thu, Aug 30, 2018 at 3:51 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotresh,

 

Yes, this include the time take  to write 1GB file to master. geo-rep was not stopped while the data was copying to master.

 

This way, you can't really measure how much time geo-rep took.

 

 

But now I am trouble, My putty session was timed out while copying data to master and geo replication was active. After I restart putty session My Master data is not syncing with slave. Its Last_synced time is  1hrs behind the current time.

 

I restart the geo rep and also delete and again create the session but its  “LAST_SYNCED” time is same.

 

Unless, geo-rep is Faulty, it would be processing/syncing. You should check logs for any errors.

 

 

Please help in this.

 

…. It's better if gluster volume has more distribute count like  3*3 or 4*3 :- Are you refereeing to create a distributed volume with 3 master node and 3 slave node?

 

Yes,  that's correct. Please do the test with this. I recommend you to run the actual workload for which you are planning to use gluster instead of copying 1GB file and testing.

 

 

 

/krishna

 

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Thursday, August 30, 2018 3:20 PM


To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

 

 

On Thu, Aug 30, 2018 at 1:52 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotresh,

 

After fix the library link on node "noi-poc-gluster ", the status of one mater node is “Active” and another is “Passive”. Can I setup both the master as “Active” ?

 

Nope, since it's replica, it's redundant to sync same files from two nodes. Both replicas can't be Active.

 

 

Also, when I copy a 1GB size of file from gluster client to master gluster volume which is replicated with the slave volume, it tooks 35 minutes and 49 seconds. Is there any way to reduce its time taken to rsync data.

 

How did you measure this time? Does this include the time take for you to write 1GB file to master?

There are two aspects to consider while measuring this.

 

1. Time to write 1GB to master

2. Time for geo-rep to transfer 1GB to slave.

   

In your case, since the setup is 1*2 and only one geo-rep worker is Active, Step2 above equals to time for step1 + network transfer time.

 

You can measure time in two scenarios

1. If geo-rep is started while the data is still being written to master. It's one way.

2. Or stop geo-rep until the 1GB file is written to master and then start geo-rep to get actual geo-rep time.

 

To improve replicating speed,

1. You can play around with rsync options depending on the kind of I/O

    and configure the same for geo-rep as it also uses rsync internally.

2. It's better if gluster volume has more distribute count like  3*3 or 4*3

    It will help in two ways.

       1. The files gets distributed on master to multiple bricks

       2. So above will help geo-rep as files on multiple bricks are synced in parallel (multiple Actives)

 

NOTE: Gluster master server and one client is in Noida, India Location.

             Gluster Slave server and one client is in USA.

 

Our approach is to transfer data from Noida gluster client will reach to the USA gluster client in a minimum time. Please suggest the best approach to achieve it.

 

[root@noi-dcops ~]# date ; rsync -avh --progress /tmp/gentoo_root.img /glusterfs/ ; date

Thu Aug 30 12:26:26 IST 2018

sending incremental file list

gentoo_root.img

          1.07G 100%  490.70kB/s    0:35:36 (xfr#1, to-chk=0/1)

 

Is this I/O time to write to master volume?

 

sent 1.07G bytes  received 35 bytes  499.65K bytes/sec

total size is 1.07G  speedup is 1.00

Thu Aug 30 13:02:15 IST 2018

[root@noi-dcops ~]#

 

 

 

[root@gluster-poc-noida gluster]#  gluster volume geo-replication status

 

MASTER NODE          MASTER VOL    MASTER BRICK         SLAVE USER    SLAVE                              SLAVE NODE        STATUS     CRAWL STATUS       LAST_SYNCED

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------

gluster-poc-noida    glusterep     /data/gluster/gv0    root          ssh://gluster-poc-sj::glusterep    gluster-poc-sj    Active     Changelog Crawl    2018-08-30 13:42:18

noi-poc-gluster      glusterep     /data/gluster/gv0    root          ssh://gluster-poc-sj::glusterep    gluster-poc-sj    Passive    N/A                N/A

[root@gluster-poc-noida gluster]#

 

Thanks in advance for your all time support.

 

/Krishna

 

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Thursday, August 30, 2018 10:51 AM


To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

Did you fix the library link on node "noi-poc-gluster " as well?

If not please fix it. Please share the geo-rep log this node if it's

as different issue.

-Kotresh HR

 

On Thu, Aug 30, 2018 at 12:17 AM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotresh,

 

Thank you so much for you input. Geo-replication is now showing “Active” atleast for 1 master node. But its still at faulty state for the 2nd master server.

 

Below is the detail.

 

[root@gluster-poc-noida glusterfs]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep status

 

MASTER NODE          MASTER VOL    MASTER BRICK         SLAVE USER    SLAVE                        SLAVE NODE        STATUS    CRAWL STATUS       LAST_SYNCED

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

gluster-poc-noida    glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    gluster-poc-sj    Active    Changelog Crawl    2018-08-29 23:56:06

noi-poc-gluster      glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A               Faulty    N/A                N/A       

 

 

[root@gluster-poc-noida glusterfs]# gluster volume status

Status of volume: glusterep

Gluster process                             TCP Port  RDMA Port  Online  Pid

------------------------------------------------------------------------------

Brick gluster-poc-noida:/data/gluster/gv0   49152     0          Y       22463

Brick noi-poc-gluster:/data/gluster/gv0     49152     0          Y       19471

Self-heal Daemon on localhost               N/A       N/A        Y       32087

Self-heal Daemon on noi-poc-gluster         N/A       N/A        Y       6272

 

Task Status of Volume glusterep

------------------------------------------------------------------------------

There are no active volume tasks

 

 

 

[root@gluster-poc-noida glusterfs]# gluster volume info

 

Volume Name: glusterep

Type: Replicate

Volume ID: 4a71bc94-14ce-4b2c-abc4-e6a9a9765161

Status: Started

Snapshot Count: 0

Number of Bricks: 1 x 2 = 2

Transport-type: tcp

Bricks:

Brick1: gluster-poc-noida:/data/gluster/gv0

Brick2: noi-poc-gluster:/data/gluster/gv0

Options Reconfigured:

transport.address-family: inet

nfs.disable: on

performance.client-io-threads: off

geo-replication.indexing: on

geo-replication.ignore-pid-check: on

changelog.changelog: on

[root@gluster-poc-noida glusterfs]#

 

Could you please help me in that also please?

 

It would be really a great help from your side.

 

/Krishna

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Wednesday, August 29, 2018 10:47 AM


To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

Answer inline

 

On Tue, Aug 28, 2018 at 4:28 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotresh,

 

I created the links before. Below is the detail.

 

[root@gluster-poc-noida ~]# ls -l /usr/lib64 | grep libgfch

lrwxrwxrwx   1 root root          30 Aug 28 14:59 libgfchangelog.so -> /usr/lib64/libgfchangelog.so.1

 

The link created is pointing to wrong library. Please fix this

 

#cd /usr/lib64

#rm libgfchangelog.so

#ln -s "libgfchangelog.so.0.0.1" libgfchangelog.so

 

lrwxrwxrwx   1 root root          23 Aug 23 23:35 libgfchangelog.so.0 -> libgfchangelog.so.0.0.1

-rwxr-xr-x   1 root root       63384 Jul 24 19:11 libgfchangelog.so.0.0.1

[root@gluster-poc-noida ~]# locate libgfchangelog.so

/usr/lib64/libgfchangelog.so.0

/usr/lib64/libgfchangelog.so.0.0.1

[root@gluster-poc-noida ~]#

 

Is it looks good what we exactly need or di I need to create any more link or How to get “libgfchangelog.so” file if missing.

 

/Krishna

 

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Tuesday, August 28, 2018 4:22 PM
To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>


Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

Hi Krishna,

As per the output shared, I don't see the file "libgfchangelog.so" which is what is required.

I only see "libgfchangelog.so.0". Please confirm "libgfchangelog.so" is present in "/usr/lib64/".

If not create a symlink similar to "libgfchangelog.so.0"

 

It should be something like below.

 

#ls -l /usr/lib64 | grep libgfch
-rwxr-xr-x. 1 root root    1078 Aug 28 05:56 libgfchangelog.la
lrwxrwxrwx. 1 root root      23 Aug 28 05:56 libgfchangelog.so -> libgfchangelog.so.0.0.1
lrwxrwxrwx. 1 root root      23 Aug 28 05:56 libgfchangelog.so.0 -> libgfchangelog.so.0.0.1
-rwxr-xr-x. 1 root root  336888 Aug 28 05:56 libgfchangelog.so.0.0.1

 

On Tue, Aug 28, 2018 at 4:04 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:

Hi Kotresh,

 

Thanks for the response, I did that also but nothing changed.

 

[root@gluster-poc-noida ~]# ldconfig /usr/lib64

[root@gluster-poc-noida ~]# ldconfig -p | grep libgfchangelog

        libgfchangelog.so.0 (libc6,x86-64) => /usr/lib64/libgfchangelog.so.0

[root@gluster-poc-noida ~]#

 

[root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep stop

Stopping geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful

[root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start

Starting geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful

 

[root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep status

 

MASTER NODE          MASTER VOL    MASTER BRICK         SLAVE USER    SLAVE                        SLAVE NODE    STATUS    CRAWL STATUS    LAST_SYNCED

-----------------------------------------------------------------------------------------------------------------------------------------------------

gluster-poc-noida    glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A

noi-poc-gluster      glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A

[root@gluster-poc-noida ~]#

 

/Krishna

 

From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Tuesday, August 28, 2018 4:00 PM
To: Sunny Kumar <sunkumar@xxxxxxxxxx>
Cc: Krishna Verma <kverma@xxxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>


Subject: Re: Upgrade to 4.1.2 geo-replication does not work

 

EXTERNAL MAIL

Hi Krishna,

Since your libraries are in /usr/lib64, you should be doing

#ldconfig /usr/lib64

Confirm that below command lists the library

#ldconfig -p | grep libgfchangelog

 

 

On Tue, Aug 28, 2018 at 3:52 PM, Sunny Kumar <sunkumar@xxxxxxxxxx> wrote:

can you do ldconfig /usr/local/lib and share the output of ldconfig -p
/usr/local/lib | grep libgf

On Tue, Aug 28, 2018 at 3:45 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
>
> Hi Sunny,
>
> I did the mentioned changes given in patch and restart the session for geo-replication. But again same errors in the logs.
>
> I have attaching the config files and logs here.
>
>
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep stop
> Stopping geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep delete
> Deleting geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep create push-pem force
> Creating geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start
> geo-replication start failed for glusterep gluster-poc-sj::glusterep
> geo-replication command failed
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start
> geo-replication start failed for glusterep gluster-poc-sj::glusterep
> geo-replication command failed
> [root@gluster-poc-noida ~]# vim /usr/libexec/glusterfs/python/syncdaemon/repce.py
> [root@gluster-poc-noida ~]# systemctl restart glusterd
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start
> Starting geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep status
>
> MASTER NODE          MASTER VOL    MASTER BRICK         SLAVE USER    SLAVE                        SLAVE NODE    STATUS    CRAWL STATUS    LAST_SYNCED
> -----------------------------------------------------------------------------------------------------------------------------------------------------
> gluster-poc-noida    glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A
> noi-poc-gluster      glusterep     /data/gluster/gv0    root          gluster-poc-sj::glusterep    N/A           Faulty    N/A             N/A
> [root@gluster-poc-noida ~]#
>
>
> /Krishna.
>
> -----Original Message-----
> From: Sunny Kumar <sunkumar@xxxxxxxxxx>
> Sent: Tuesday, August 28, 2018 3:17 PM
> To: Krishna Verma <kverma@xxxxxxxxxxx>
> Cc: gluster-users@xxxxxxxxxxx
> Subject: Re: Upgrade to 4.1.2 geo-replication does not work
>
> EXTERNAL MAIL
>
>
> With same log message ?
>
> Can you please verify that
> https://urldefense.proofpoint.com/v2/url?u=https-3A__review.gluster.org_-23_c_glusterfs_-2B_20207_&d=DwIBaQ&c=aUq983L2pue2FqKFoP6PGHMJQyoJ7kl3s3GZ-_haXqY&r=0E5nRoxLsT2ZXgCpJM_6ZItAWQ2jH8rVLG6tiXhoLFE&m=F0ExtFUfa_YCktOGvy82x3IAxvi2GrbPR72jZ8beuYk&s=fGtkmezHJj5YoLN3dUeVUCcYFnREHyOSk36mRjbTTEQ&e= patch is present if not can you please apply that.
> and try with symlinking ln -s /usr/lib64/libgfchangelog.so.0 /usr/lib64/libgfchangelog.so.
>
> Please share the log also.
>
> Regards,
> Sunny
> On Tue, Aug 28, 2018 at 3:02 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
> >
> > Hi Sunny,
> >
> > Thanks for your response, I tried both, but still I am getting the same error.
> >
> >
> > [root@noi-poc-gluster ~]# ldconfig /usr/lib [root@noi-poc-gluster ~]#
> >
> > [root@noi-poc-gluster ~]# ln -s /usr/lib64/libgfchangelog.so.1
> > /usr/lib64/libgfchangelog.so [root@noi-poc-gluster ~]# ls -l
> > /usr/lib64/libgfchangelog.so lrwxrwxrwx. 1 root root 30 Aug 28 14:59
> > /usr/lib64/libgfchangelog.so -> /usr/lib64/libgfchangelog.so.1
> >
> > /Krishna
> >
> > -----Original Message-----
> > From: Sunny Kumar <sunkumar@xxxxxxxxxx>
> > Sent: Tuesday, August 28, 2018 2:55 PM
> > To: Krishna Verma <kverma@xxxxxxxxxxx>
> > Cc: gluster-users@xxxxxxxxxxx
> > Subject: Re: Upgrade to 4.1.2 geo-replication does not
> > work
> >
> > EXTERNAL MAIL
> >
> >
> > Hi Krish,
> >
> > You can run -
> > #ldconfig /usr/lib
> >
> > If that still does not solves your problem you can do manual symlink
> > like - ln -s /usr/lib64/libgfchangelog.so.1
> > /usr/lib64/libgfchangelog.so
> >
> > Thanks,
> > Sunny Kumar
> > On Tue, Aug 28, 2018 at 1:47 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
> > >
> > > Hi
> > >
> > >
> > >
> > > I am getting below error in gsyncd.log
> > >
> > >
> > >
> > > OSError: libgfchangelog.so: cannot open shared object file: No such
> > > file or directory
> > >
> > > [2018-08-28 07:19:41.446785] E [repce(worker /data/gluster/gv0):197:__call__] RepceClient: call failed       call=26469:139794524604224:1535440781.44        method=init     error=OSError
> > >
> > > [2018-08-28 07:19:41.447041] E [syncdutils(worker /data/gluster/gv0):330:log_raise_exception] <top>: FAIL:
> > >
> > > Traceback (most recent call last):
> > >
> > >   File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line
> > > 311, in main
> > >
> > >     func(args)
> > >
> > >   File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line
> > > 72, in subcmd_worker
> > >
> > >     local.service_loop(remote)
> > >
> > >   File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line
> > > 1236, in service_loop
> > >
> > >     changelog_agent.init()
> > >
> > >   File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line
> > > 216, in __call__
> > >
> > >     return self.ins(self.meth, *a)
> > >
> > >   File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line
> > > 198, in __call__
> > >
> > >     raise res
> > >
> > > OSError: libgfchangelog.so: cannot open shared object file: No such
> > > file or directory
> > >
> > > [2018-08-28 07:19:41.457555] I [repce(agent /data/gluster/gv0):80:service_loop] RepceServer: terminating on reaching EOF.
> > >
> > > [2018-08-28 07:19:42.440184] I [monitor(monitor):272:monitor] Monitor:
> > > worker died in startup phase  brick=/data/gluster/gv0
> > >
> > >
> > >
> > > Below is my file location:
> > >
> > >
> > >
> > > /usr/lib64/libgfchangelog.so.0
> > >
> > > /usr/lib64/libgfchangelog.so.0.0.1
> > >
> > >
> > >
> > > What I can do to fix it ?
> > >
> > >
> > >
> > > /Krish
> > >
> > > _______________________________________________
> > > Gluster-users mailing list
> > > Gluster-users@xxxxxxxxxxx
> > > https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.gluster.o
> > > rg
> > > _mailman_listinfo_gluster-2Dusers&d=DwIBaQ&c=aUq983L2pue2FqKFoP6PGHM
> > > JQ
> > > yoJ7kl3s3GZ-_haXqY&r=0E5nRoxLsT2ZXgCpJM_6ZItAWQ2jH8rVLG6tiXhoLFE&m=_
> > > u6
> > > vGRjlVsype7Z8hXDgCONilqVe4sIWkXNqqz2n3IQ&s=i0EUwtUHurhJHyw9UPpepCdLB
> > > 70
> > > 1mkxoNZWYvU7XXug&e=
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx

https://lists.gluster.org/mailman/listinfo/gluster-users




--

Thanks and Regards,

Kotresh H R




--

Thanks and Regards,

Kotresh H R




--

Thanks and Regards,

Kotresh H R




--

Thanks and Regards,

Kotresh H R




--

Thanks and Regards,

Kotresh H R




--

Thanks and Regards,

Kotresh H R




--

Thanks and Regards,

Kotresh H R




--

Thanks and Regards,

Kotresh H R




--
Thanks and Regards,
Kotresh H R
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux