Hi Kotresh,
Yes, this include the time take to write 1GB file to master. geo-rep was not stopped while the data was copying to master.
But now I am trouble, My putty session was timed out while copying data to master and geo replication was active. After I restart putty session My Master data is not syncing with slave. Its Last_synced time is 1hrs behind the current time.
I restart the geo rep and also delete and again create the session but its “LAST_SYNCED” time is same.
Please help in this.
…. It's better if gluster volume has more distribute count like 3*3 or 4*3 :-
Are you refereeing to create a distributed volume with 3 master node and 3 slave node?
/krishna
From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Thursday, August 30, 2018 3:20 PM
To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: [Gluster-users] Upgrade to 4.1.2 geo-replication does not work
On Thu, Aug 30, 2018 at 1:52 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:
Hi Kotresh,
After fix the library link on node "noi-poc-gluster
", the status of one mater node is “Active” and another is “Passive”. Can I setup both the master as “Active” ?
Nope, since it's replica, it's redundant to sync same files from two nodes. Both replicas can't be Active.
Also, when I copy a 1GB size of file from gluster client to master gluster volume which is replicated with the slave volume, it tooks 35 minutes and 49 seconds. Is there any way
to reduce its time taken to rsync data.
How did you measure this time? Does this include the time take for you to write 1GB file to master?
There are two aspects to consider while measuring this.
1. Time to write 1GB to master
2. Time for geo-rep to transfer 1GB to slave.
In your case, since the setup is 1*2 and only one geo-rep worker is Active, Step2 above equals to time for step1 + network transfer time.
You can measure time in two scenarios
1. If geo-rep is started while the data is still being written to master. It's one way.
2. Or stop geo-rep until the 1GB file is written to master and then start geo-rep to get actual geo-rep time.
To improve replicating speed,
1. You can play around with rsync options depending on the kind of I/O
and configure the same for geo-rep as it also uses rsync internally.
2. It's better if gluster volume has more distribute count like 3*3 or 4*3
It will help in two ways.
1. The files gets distributed on master to multiple bricks
2. So above will help geo-rep as files on multiple bricks are synced in parallel (multiple Actives)
NOTE: Gluster master server and one client is in Noida, India Location.
Gluster Slave server and one client is in USA.
Our approach is to transfer data from Noida gluster client will reach to the USA gluster client in a minimum time. Please suggest the best approach to achieve it.
[root@noi-dcops ~]# date ; rsync -avh --progress /tmp/gentoo_root.img /glusterfs/ ; date
Thu Aug 30 12:26:26 IST 2018
sending incremental file list
gentoo_root.img
1.07G 100% 490.70kB/s 0:35:36 (xfr#1, to-chk=0/1)
Is this I/O time to write to master volume?
sent 1.07G bytes received 35 bytes 499.65K bytes/sec
total size is 1.07G speedup is 1.00
Thu Aug 30 13:02:15 IST 2018
[root@noi-dcops ~]#
[root@gluster-poc-noida gluster]# gluster volume geo-replication status
MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
gluster-poc-noida glusterep /data/gluster/gv0 root ssh://gluster-poc-sj::glusterep gluster-poc-sj Active Changelog Crawl 2018-08-30 13:42:18
noi-poc-gluster glusterep /data/gluster/gv0 root ssh://gluster-poc-sj::glusterep gluster-poc-sj Passive N/A N/A
[root@gluster-poc-noida gluster]#
Thanks in advance for your all time support.
/Krishna
From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Thursday, August 30, 2018 10:51 AM
Did you fix the library link on node "noi-poc-gluster
" as well?
If not please fix it. Please share the geo-rep log this node if it's
as different issue.
-Kotresh HR
On Thu, Aug 30, 2018 at 12:17 AM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:
Hi Kotresh,
Thank you so much for you input. Geo-replication is now showing “Active” atleast for 1 master node. But its still at faulty state for the 2nd master server.
Below is the detail.
[root@gluster-poc-noida glusterfs]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep status
MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
gluster-poc-noida glusterep /data/gluster/gv0 root gluster-poc-sj::glusterep gluster-poc-sj Active Changelog Crawl 2018-08-29 23:56:06
noi-poc-gluster glusterep /data/gluster/gv0 root gluster-poc-sj::glusterep N/A Faulty N/A N/A
[root@gluster-poc-noida glusterfs]# gluster volume status
Status of volume: glusterep
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick gluster-poc-noida:/data/gluster/gv0 49152 0 Y 22463
Brick noi-poc-gluster:/data/gluster/gv0 49152 0 Y 19471
Self-heal Daemon on localhost N/A N/A Y 32087
Self-heal Daemon on noi-poc-gluster N/A N/A Y 6272
Task Status of Volume glusterep
------------------------------------------------------------------------------
There are no active volume tasks
[root@gluster-poc-noida glusterfs]# gluster volume info
Volume Name: glusterep
Type: Replicate
Volume ID: 4a71bc94-14ce-4b2c-abc4-e6a9a9765161
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster-poc-noida:/data/gluster/gv0
Brick2: noi-poc-gluster:/data/gluster/gv0
Options Reconfigured:
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: off
geo-replication.indexing: on
geo-replication.ignore-pid-check: on
changelog.changelog: on
[root@gluster-poc-noida glusterfs]#
Could you please help me in that also please?
It would be really a great help from your side.
/Krishna
From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Wednesday, August 29, 2018 10:47 AM
Answer inline
On Tue, Aug 28, 2018 at 4:28 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:
Hi Kotresh,
I created the links before. Below is the detail.
[root@gluster-poc-noida ~]# ls -l /usr/lib64 | grep libgfch
lrwxrwxrwx 1 root root 30 Aug 28 14:59 libgfchangelog.so -> /usr/lib64/libgfchangelog.so.1
The link created is pointing to wrong library. Please fix this
#ln -s "libgfchangelog.so.0.0.1" libgfchangelog.so
lrwxrwxrwx 1 root root 23 Aug 23 23:35 libgfchangelog.so.0 -> libgfchangelog.so.0.0.1
-rwxr-xr-x 1 root root 63384 Jul 24 19:11 libgfchangelog.so.0.0.1
[root@gluster-poc-noida ~]# locate libgfchangelog.so
/usr/lib64/libgfchangelog.so.0
/usr/lib64/libgfchangelog.so.0.0.1
[root@gluster-poc-noida ~]#
Is it looks good what we exactly need or di I need to create any more link or How to get “libgfchangelog.so” file if missing.
/Krishna
From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Tuesday, August 28, 2018 4:22 PM
To: Krishna Verma <kverma@xxxxxxxxxxx>
Cc: Sunny Kumar <sunkumar@xxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: [Gluster-users] Upgrade to 4.1.2 geo-replication does not work
As per the output shared, I don't see the file "libgfchangelog.so" which is what is required.
I only see "libgfchangelog.so.0". Please confirm "libgfchangelog.so" is present in "/usr/lib64/".
If not create a symlink similar to "libgfchangelog.so.0"
It should be something like below.
#ls -l /usr/lib64 | grep libgfch
-rwxr-xr-x. 1 root root 1078 Aug 28 05:56
libgfchangelog.la
lrwxrwxrwx. 1 root root 23 Aug 28 05:56 libgfchangelog.so -> libgfchangelog.so.0.0.1
lrwxrwxrwx. 1 root root 23 Aug 28 05:56 libgfchangelog.so.0 -> libgfchangelog.so.0.0.1
-rwxr-xr-x. 1 root root 336888 Aug 28 05:56 libgfchangelog.so.0.0.1
On Tue, Aug 28, 2018 at 4:04 PM, Krishna Verma <kverma@xxxxxxxxxxx> wrote:
Hi Kotresh,
Thanks for the response, I did that also but nothing changed.
[root@gluster-poc-noida ~]# ldconfig /usr/lib64
[root@gluster-poc-noida ~]# ldconfig -p | grep libgfchangelog
libgfchangelog.so.0 (libc6,x86-64) => /usr/lib64/libgfchangelog.so.0
[root@gluster-poc-noida ~]#
[root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep stop
Stopping geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
[root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start
Starting geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
[root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep status
MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
-----------------------------------------------------------------------------------------------------------------------------------------------------
gluster-poc-noida glusterep /data/gluster/gv0 root gluster-poc-sj::glusterep N/A Faulty N/A N/A
noi-poc-gluster glusterep /data/gluster/gv0 root gluster-poc-sj::glusterep N/A Faulty N/A N/A
[root@gluster-poc-noida ~]#
/Krishna
From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Sent: Tuesday, August 28, 2018 4:00 PM
To: Sunny Kumar <sunkumar@xxxxxxxxxx>
Cc: Krishna Verma <kverma@xxxxxxxxxxx>; Gluster Users <gluster-users@xxxxxxxxxxx>
Subject: Re: [Gluster-users] Upgrade to 4.1.2 geo-replication does not work
Since your libraries are in /usr/lib64, you should be doing
#ldconfig /usr/lib64
Confirm that below command lists the library
#ldconfig -p | grep libgfchangelog
On Tue, Aug 28, 2018 at 3:52 PM, Sunny Kumar <sunkumar@xxxxxxxxxx> wrote:
can you do ldconfig /usr/local/lib and share the output of ldconfig -p
/usr/local/lib | grep libgf
On Tue, Aug 28, 2018 at 3:45 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
>
> Hi Sunny,
>
> I did the mentioned changes given in patch and restart the session for geo-replication. But again same errors in the logs.
>
> I have attaching the config files and logs here.
>
>
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep stop
> Stopping geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep delete
> Deleting geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep create push-pem force
> Creating geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start
> geo-replication start failed for glusterep gluster-poc-sj::glusterep
> geo-replication command failed
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start
> geo-replication start failed for glusterep gluster-poc-sj::glusterep
> geo-replication command failed
> [root@gluster-poc-noida ~]# vim /usr/libexec/glusterfs/python/syncdaemon/repce.py
> [root@gluster-poc-noida ~]# systemctl restart glusterd
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep start
> Starting geo-replication session between glusterep & gluster-poc-sj::glusterep has been successful
> [root@gluster-poc-noida ~]# gluster volume geo-replication glusterep gluster-poc-sj::glusterep status
>
> MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
> -----------------------------------------------------------------------------------------------------------------------------------------------------
> gluster-poc-noida glusterep /data/gluster/gv0 root gluster-poc-sj::glusterep N/A Faulty N/A N/A
> noi-poc-gluster glusterep /data/gluster/gv0 root gluster-poc-sj::glusterep N/A Faulty N/A N/A
> [root@gluster-poc-noida ~]#
>
>
> /Krishna.
>
> -----Original Message-----
> From: Sunny Kumar <sunkumar@xxxxxxxxxx>
> Sent: Tuesday, August 28, 2018 3:17 PM
> To: Krishna Verma <kverma@xxxxxxxxxxx>
> Cc: gluster-users@xxxxxxxxxxx
> Subject: Re: [Gluster-users] Upgrade to 4.1.2 geo-replication does not work
>
> EXTERNAL MAIL
>
>
> With same log message ?
>
> Can you please verify that
>
https://urldefense.proofpoint.com/v2/url?u=https-3A__review.gluster.org_-23_c_glusterfs_-2B_20207_&d=DwIBaQ&c=aUq983L2pue2FqKFoP6PGHMJQyoJ7kl3s3GZ-_haXqY&r=0E5nRoxLsT2ZXgCpJM_6ZItAWQ2jH8rVLG6tiXhoLFE&m=F0ExtFUfa_YCktOGvy82x3IAxvi2GrbPR72jZ8beuYk&s=fGtkmezHJj5YoLN3dUeVUCcYFnREHyOSk36mRjbTTEQ&e=
patch is present if not can you please apply that.
> and try with symlinking ln -s /usr/lib64/libgfchangelog.so.0 /usr/lib64/libgfchangelog.so.
>
> Please share the log also.
>
> Regards,
> Sunny
> On Tue, Aug 28, 2018 at 3:02 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
> >
> > Hi Sunny,
> >
> > Thanks for your response, I tried both, but still I am getting the same error.
> >
> >
> > [root@noi-poc-gluster ~]# ldconfig /usr/lib [root@noi-poc-gluster ~]#
> >
> > [root@noi-poc-gluster ~]# ln -s /usr/lib64/libgfchangelog.so.1
> > /usr/lib64/libgfchangelog.so [root@noi-poc-gluster ~]# ls -l
> > /usr/lib64/libgfchangelog.so lrwxrwxrwx. 1 root root 30 Aug 28 14:59
> > /usr/lib64/libgfchangelog.so -> /usr/lib64/libgfchangelog.so.1
> >
> > /Krishna
> >
> > -----Original Message-----
> > From: Sunny Kumar <sunkumar@xxxxxxxxxx>
> > Sent: Tuesday, August 28, 2018 2:55 PM
> > To: Krishna Verma <kverma@xxxxxxxxxxx>
> > Cc: gluster-users@xxxxxxxxxxx
> > Subject: Re: [Gluster-users] Upgrade to 4.1.2 geo-replication does not
> > work
> >
> > EXTERNAL MAIL
> >
> >
> > Hi Krish,
> >
> > You can run -
> > #ldconfig /usr/lib
> >
> > If that still does not solves your problem you can do manual symlink
> > like - ln -s /usr/lib64/libgfchangelog.so.1
> > /usr/lib64/libgfchangelog.so
> >
> > Thanks,
> > Sunny Kumar
> > On Tue, Aug 28, 2018 at 1:47 PM Krishna Verma <kverma@xxxxxxxxxxx> wrote:
> > >
> > > Hi
> > >
> > >
> > >
> > > I am getting below error in gsyncd.log
> > >
> > >
> > >
> > > OSError: libgfchangelog.so: cannot open shared object file: No such
> > > file or directory
> > >
> > > [2018-08-28 07:19:41.446785] E [repce(worker /data/gluster/gv0):197:__call__] RepceClient: call failed call=26469:139794524604224:1535440781.44 method=init error=OSError
> > >
> > > [2018-08-28 07:19:41.447041] E [syncdutils(worker /data/gluster/gv0):330:log_raise_exception] <top>: FAIL:
> > >
> > > Traceback (most recent call last):
> > >
> > > File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line
> > > 311, in main
> > >
> > > func(args)
> > >
> > > File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line
> > > 72, in subcmd_worker
> > >
> > > local.service_loop(remote)
> > >
> > > File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line
> > > 1236, in service_loop
> > >
> > > changelog_agent.init()
> > >
> > > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line
> > > 216, in __call__
> > >
> > > return self.ins(self.meth, *a)
> > >
> > > File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line
> > > 198, in __call__
> > >
> > > raise res
> > >
> > > OSError: libgfchangelog.so: cannot open shared object file: No such
> > > file or directory
> > >
> > > [2018-08-28 07:19:41.457555] I [repce(agent /data/gluster/gv0):80:service_loop] RepceServer: terminating on reaching EOF.
> > >
> > > [2018-08-28 07:19:42.440184] I [monitor(monitor):272:monitor] Monitor:
> > > worker died in startup phase brick=/data/gluster/gv0
> > >
> > >
> > >
> > > Below is my file location:
> > >
> > >
> > >
> > > /usr/lib64/libgfchangelog.so.0
> > >
> > > /usr/lib64/libgfchangelog.so.0.0.1
> > >
> > >
> > >
> > > What I can do to fix it ?
> > >
> > >
> > >
> > > /Krish
> > >
> > > _______________________________________________
> > > Gluster-users mailing list
> > > Gluster-users@xxxxxxxxxxx
> > >
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.gluster.o
> > > rg
> > > _mailman_listinfo_gluster-2Dusers&d=DwIBaQ&c=aUq983L2pue2FqKFoP6PGHM
> > > JQ
> > > yoJ7kl3s3GZ-_haXqY&r=0E5nRoxLsT2ZXgCpJM_6ZItAWQ2jH8rVLG6tiXhoLFE&m=_
> > > u6
> > > vGRjlVsype7Z8hXDgCONilqVe4sIWkXNqqz2n3IQ&s=i0EUwtUHurhJHyw9UPpepCdLB
> > > 70
> > > 1mkxoNZWYvU7XXug&e=
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users
--
--
--
--
--
|
