Hi, well, as the situation doesn't get better, we're quite helpless and mostly in the dark, so we're thinking about hiring some professional support. Any hint? :-) 2018-08-15 11:07 GMT+02:00 Hu Bert <revirii@xxxxxxxxxxxxxx>: > Hello again :-) > > The self heal must have finished as there are no log entries in > glustershd.log files anymore. According to munin disk latency (average > io wait) has gone down to 100 ms, and disk utilization has gone down > to ~60% - both on all servers and hard disks. > > But now system load on 2 servers (which were in the good state) > fluctuates between 60 and 100; the server with the formerly failed > disk has a load of 20-30.I've uploaded some munin graphics of the cpu > usage: > > https://abload.de/img/gluster11_cpu31d3a.png > https://abload.de/img/gluster12_cpu8sem7.png > https://abload.de/img/gluster13_cpud7eni.png > > This can't be normal. 2 of the servers under heavy load and one not > that much. Does anyone have an explanation of this strange behaviour? > > > Thx :-) > > 2018-08-14 9:37 GMT+02:00 Hu Bert <revirii@xxxxxxxxxxxxxx>: >> Hi there, >> >> well, it seems the heal has finally finished. Couldn't see/find any >> related log message; is there such a message in a specific log file? >> >> But i see the same behaviour when the last heal finished: all CPU >> cores are consumed by brick processes; not only by the formerly failed >> bricksdd1, but by all 4 brick processes (and their threads). Load goes >> up to > 100 on the 2 servers with the not-failed brick, and >> glustershd.log gets filled with a lot of entries. Load on the server >> with the then failed brick not that high, but still ~60. >> >> Is this behaviour normal? Is there some post-heal after a heal has finished? >> >> thx in advance :-) _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
