On Thu, Jan 25, 2018 at 2:27 AM, Samuli Heinonen <samppah@xxxxxxxxxxxxx> wrote:
Hi!
Thank you very much for your help so far. Could you please tell an example command how to use aux-gid-mount to remove locks? "gluster vol clear-locks" seems to mount volume by itself.
You are correct, sorry, this was implemented around 7 years back and I forgot that bit about it :-(. Essentially it becomes a getxattr syscall on the file.
Could you give me the clear-locks command you were trying to execute and I can probably convert it to the getfattr command?
Best regards,
Samuli Heinonen
Pranith Kumar Karampuri <mailto:pkarampu@xxxxxxxxxx>
23 January 2018 at 10.30
On Tue, Jan 23, 2018 at 1:38 PM, Samuli Heinonen <samppah@xxxxxxxxxxxxx <mailto:samppah@xxxxxxxxxxxxx>> wrote:
Pranith Kumar Karampuri kirjoitti 23.01.2018 09:34:
On Mon, Jan 22, 2018 at 12:33 AM, Samuli Heinonen<http://ovirt8z2.xxx.com>-5652<samppah@xxxxxxxxxxxxx <mailto:samppah@xxxxxxxxxxxxx>> wrote:
Hi again,
here is more information regarding issue described earlier
It looks like self healing is stuck. According to "heal
statistics"
crawl began at Sat Jan 20 12:56:19 2018 and it's still
going on
(It's around Sun Jan 21 20:30 when writing this). However
glustershd.log says that last heal was completed at
"2018-01-20
11:00:13.090697" (which is 13:00 UTC+2). Also "heal info"
has been
running now for over 16 hours without any information. In
statedump
I can see that storage nodes have locks on files and some
of those
are blocked. Ie. Here again it says that ovirt8z2 is
having active
lock even ovirt8z2 crashed after the lock was granted.:
[xlator.features.locks.zone2-ssd1-vmstor1-locks.inode]
path=/.shard/3d55f8cc-cda9-489a-b0a3-fd0f43d67876.27
mandatory=0
inodelk-count=3
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:self- heal
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0,
len=0, pid
= 18446744073709551610, owner=d0c6d857a87f0000,
client=0x7f885845efa0,
connection-id=sto2z2.xxx-10975-2018/01/20-10:56:14:649541- zone2-ssd1-vmstor1-client-0-0- 0,
granted at 2018-01-20 10:59:52
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:metad ata
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0,
len=0, pid
= 3420, owner=d8b9372c397f0000, client=0x7f8858410be0,
connection-id=ovirt8z2.xxx.com-2017/12/27-09:49:02:946825- zone2-ssd1-vmstor1-client-0-7- 0, <mailto:Gluster-users@gluster.
granted at 2018-01-20 08:57:23
inodelk.inodelk[1](BLOCKED)=type=WRITE, whence=0, start=0,
len=0,
pid = 18446744073709551610, owner=d0c6d857a87f0000,
client=0x7f885845efa0,
connection-id=sto2z2.xxx-10975-2018/01/20-10:56:14:649541- zone2-ssd1-vmstor1-client-0-0- 0,
blocked at 2018-01-20 10:59:52
I'd also like to add that volume had arbiter brick before
crash
happened. We decided to remove it because we thought that
it was
causing issues. However now I think that this was
unnecessary. After
the crash arbiter logs had lots of messages like this:
[2018-01-20 10:19:36.515717] I [MSGID: 115072]
[server-rpc-fops.c:1640:server_setattr_cbk]
0-zone2-ssd1-vmstor1-server: 37374187: SETATTR
<gfid:a52055bd-e2e9-42dd-92a3-e96b693bcafe>
(a52055bd-e2e9-42dd-92a3-e96b693bcafe) ==> (Operation not
permitted)
[Operation not permitted]
Is there anyways to force self heal to stop? Any help
would be very
much appreciated :)
Exposing .shard to a normal mount is opening a can of worms. You
should probably look at mounting the volume with gfid
aux-mount where
you can access a file with
<path-to-mount>/.gfid/<gfid-string>to clear
locks on it.
Mount command: mount -t glusterfs -o aux-gfid-mount vm1:test
/mnt/testvol
A gfid string will have some hyphens like:
11118443-1894-4273-9340-4b212fa1c0e4
That said. Next disconnect on the brick where you successfully
did the
clear-locks will crash the brick. There was a bug in 3.8.x
series with
clear-locks which was fixed in 3.9.0 with a feature. The self-heal
deadlocks that you witnessed also is fixed in 3.10 version of the
release.
Thank you the answer. Could you please tell more about crash? What
will actually happen or is there a bug report about it? Just want
to make sure that we can do everything to secure data on bricks.
We will look into upgrade but we have to make sure that new
version works for us and of course get self healing working before
doing anything :)
Locks xlator/module maintains a list of locks that are granted to a client. Clear locks had an issue where it forgets to remove the lock from this list. So the connection list ends up pointing to data that is freed in that list after a clear lock. When a disconnect happens, all the locks that are granted to a client need to be unlocked. So the process starts traversing through this list and when it starts trying to access this freed data it leads to a crash. I found it while reviewing a feature patch sent by facebook folks to locks xlator (http://review.gluster.org/14816 ) for 3.9.0 and they also fixed this bug as well as part of that feature patch.
Br,
Samuli
3.8.x is EOLed, so I recommend you to upgrade to a supported
version
soon.
Best regards,
Samuli Heinonen
Samuli Heinonen
20 January 2018 at 21.57
Hi all!
One hypervisor on our virtualization environment
crashed and now
some of the VM images cannot be accessed. After
investigation we
found out that there was lots of images that still had
active lock
on crashed hypervisor. We were able to remove locks
from "regular
files", but it doesn't seem possible to remove locks
from shards.
We are running GlusterFS 3.8.15 on all nodes.
Here is part of statedump that shows shard having
active lock on
crashed node:
[xlator.features.locks.zone2-ssd1-vmstor1-locks.inode]
path=/.shard/75353c17-d6b8-485d-9baf-fd6c700e39a1.21
mandatory=0
inodelk-count=1
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:metad ata
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:self- heal
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0,
start=0, len=0,
pid = 3568, owner=14ce372c397f0000, client=0x7f3198388770,
connection-id
ovirt8z2.xxx-5652-2017/12/27-09:49:02:946825-zone2-ssd1-vmst or1-client-1-7-0,
granted at 2018-01-20 08:57:24
If we try to run clear-locks we get following error
message:
# gluster volume clear-locks zone2-ssd1-vmstor1
/.shard/75353c17-d6b8-485d-9baf-fd6c700e39a1.21 kind
all inode
Volume clear-locks unsuccessful
clear-locks getxattr command failed. Reason: Operation not
permitted
Gluster vol info if needed:
Volume Name: zone2-ssd1-vmstor1
Type: Replicate
Volume ID: b6319968-690b-4060-8fff-b212d2295208
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 2 = 2
Transport-type: rdma
Bricks:
Brick1: sto1z2.xxx:/ssd1/zone2-vmstor1/export
Brick2: sto2z2.xxx:/ssd1/zone2-vmstor1/export
Options Reconfigured:
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
performance.client-io-threads: off
storage.linux-aio: off
performance.readdir-ahead: on
client.event-threads: 16
server.event-threads: 16
performance.strict-write-ordering: off
performance.quick-read: off
performance.read-ahead: on
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: on
cluster.quorum-type: none
network.ping-timeout: 22
performance.write-behind: off
nfs.disable: on
features.shard: on
features.shard-block-size: 512MB
storage.owner-uid: 36
storage.owner-gid: 36
performance.io-thread-count: 64
performance.cache-size: 2048MB
performance.write-behind-window-size: 256MB
server.allow-insecure: on
cluster.ensure-durability: off
config.transport: rdma
server.outstanding-rpc-limit: 512
diagnostics.brick-log-level: INFO
Any recommendations how to advance from here?
Best regards,
Samuli Heinonen
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxxorg >
http://lists.gluster.org/mailman/listinfo/gluster-users <http://lists.gluster.org/mailman/listinfo/gluster-users >
[1]
_______________________________________________ Gluster-users@xxxxxxxxxxx <mailto:Gluster-users@gluster.
Gluster-users mailing listorg >
http://lists.gluster.org/mailman/listinfo/gluster-users
<http://lists.gluster.org/mailman/listinfo/gluster-users > [1]
--
Pranith
Links:
------
[1] http://lists.gluster.org/mailman/listinfo/gluster-users
<http://lists.gluster.org/mailman/listinfo/gluster-users >
--
Pranith
Samuli Heinonen <mailto:samppah@xxxxxxxxxxxxx>
21 January 2018 at 21.03
Hi again,
here is more information regarding issue described earlier
It looks like self healing is stuck. According to "heal statistics" crawl began at Sat Jan 20 12:56:19 2018 and it's still going on (It's around Sun Jan 21 20:30 when writing this). However glustershd.log says that last heal was completed at "2018-01-20 11:00:13.090697" (which is 13:00 UTC+2). Also "heal info" has been running now for over 16 hours without any information. In statedump I can see that storage nodes have locks on files and some of those are blocked. Ie. Here again it says that ovirt8z2 is having active lock even ovirt8z2 crashed after the lock was granted.:
[xlator.features.locks.zone2-ssd1-vmstor1-locks.inode] Best regards,
path=/.shard/3d55f8cc-cda9-489a-b0a3-fd0f43d67876.27
mandatory=0
inodelk-count=3
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:self- heal
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0, len=0, pid = 18446744073709551610, owner=d0c6d857a87f0000, client=0x7f885845efa0, connection-id=sto2z2.xxx-10975 -2018/01/20-10:56:14:649541- zone2-ssd1-vmstor1-client-0-0- 0, granted at 2018-01-20 10:59:52
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:metad ata
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0, len=0, pid = 3420, owner=d8b9372c397f0000, client=0x7f8858410be0, connection-id=ovirt8z2.xxx.com -5652-2017/12/27-09:49:02:9468 25-zone2-ssd1-vmstor1-client- 0-7-0, granted at 2018-01-20 08:57:23
inodelk.inodelk[1](BLOCKED)=type=WRITE, whence=0, start=0, len=0, pid = 18446744073709551610, owner=d0c6d857a87f0000, client=0x7f885845efa0, connection-id=sto2z2.xxx-10975 -2018/01/20-10:56:14:649541- zone2-ssd1-vmstor1-client-0-0- 0, blocked at 2018-01-20 10:59:52
I'd also like to add that volume had arbiter brick before crash happened. We decided to remove it because we thought that it was causing issues. However now I think that this was unnecessary. After the crash arbiter logs had lots of messages like this:
[2018-01-20 10:19:36.515717] I [MSGID: 115072] [server-rpc-fops.c:1640:server_setattr_cbk] 0-zone2-ssd1-vmstor1-server: 37374187: SETATTR <gfid:a52055bd-e2e9-42dd-92a3- e96b693bcafe> (a52055bd-e2e9-42dd-92a3-e96b6 93bcafe) ==> (Operation not permitted) [Operation not permitted]
Is there anyways to force self heal to stop? Any help would be very much appreciated :)
Samuli Heinonen
_______________________________________________ Samuli Heinonen <mailto:samppah@xxxxxxxxxxxxx>
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users
20 January 2018 at 21.57
Hi all!
One hypervisor on our virtualization environment crashed and now some of the VM images cannot be accessed. After investigation we found out that there was lots of images that still had active lock on crashed hypervisor. We were able to remove locks from "regular files", but it doesn't seem possible to remove locks from shards.
We are running GlusterFS 3.8.15 on all nodes.
Here is part of statedump that shows shard having active lock on crashed node:
[xlator.features.locks.zone2-ssd1-vmstor1-locks.inode]
path=/.shard/75353c17-d6b8-485d-9baf-fd6c700e39a1.21
mandatory=0
inodelk-count=1
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:metad ata
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:self- heal
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0, len=0, pid = 3568, owner=14ce372c397f0000, client=0x7f3198388770, connection-id ovirt8z2.xxx-5652-2017/12/27-0 9:49:02:946825-zone2-ssd1-vmst or1-client-1-7-0, granted at 2018-01-20 08:57:24
If we try to run clear-locks we get following error message:
# gluster volume clear-locks zone2-ssd1-vmstor1 /.shard/75353c17-d6b8-485d-9baf-fd6c700e39a1.21 kind all inode
Volume clear-locks unsuccessful
clear-locks getxattr command failed. Reason: Operation not permitted
Gluster vol info if needed:
Volume Name: zone2-ssd1-vmstor1
Type: Replicate
Volume ID: b6319968-690b-4060-8fff-b212d2295208
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 2 = 2
Transport-type: rdma
Bricks:
Brick1: sto1z2.xxx:/ssd1/zone2-vmstor1/export
Brick2: sto2z2.xxx:/ssd1/zone2-vmstor1/export
Options Reconfigured:
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
performance.client-io-threads: off
storage.linux-aio: off
performance.readdir-ahead: on
client.event-threads: 16
server.event-threads: 16
performance.strict-write-ordering: off
performance.quick-read: off
performance.read-ahead: on
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: on
cluster.quorum-type: none
network.ping-timeout: 22
performance.write-behind: off
nfs.disable: on
features.shard: on
features.shard-block-size: 512MB
storage.owner-uid: 36
storage.owner-gid: 36
performance.io-thread-count: 64
performance.cache-size: 2048MB
performance.write-behind-window-size: 256MB
server.allow-insecure: on
cluster.ensure-durability: off
config.transport: rdma
server.outstanding-rpc-limit: 512
diagnostics.brick-log-level: INFO
Any recommendations how to advance from here?
Best regards,
Samuli Heinonen
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users
--
Pranith
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-users
