Pranith Kumar Karampuri kirjoitti 23.01.2018 09:34:
On Mon, Jan 22, 2018 at 12:33 AM, Samuli Heinonen
<samppah@xxxxxxxxxxxxx> wrote:
Hi again,
here is more information regarding issue described earlier
It looks like self healing is stuck. According to "heal statistics"
crawl began at Sat Jan 20 12:56:19 2018 and it's still going on
(It's around Sun Jan 21 20:30 when writing this). However
glustershd.log says that last heal was completed at "2018-01-20
11:00:13.090697" (which is 13:00 UTC+2). Also "heal info" has been
running now for over 16 hours without any information. In statedump
I can see that storage nodes have locks on files and some of those
are blocked. Ie. Here again it says that ovirt8z2 is having active
lock even ovirt8z2 crashed after the lock was granted.:
[xlator.features.locks.zone2-ssd1-vmstor1-locks.inode]
path=/.shard/3d55f8cc-cda9-489a-b0a3-fd0f43d67876.27
mandatory=0
inodelk-count=3
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:self-heal
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0, len=0, pid
= 18446744073709551610, owner=d0c6d857a87f0000,
client=0x7f885845efa0,
connection-id=sto2z2.xxx-10975-2018/01/20-10:56:14:649541-zone2-ssd1-vmstor1-client-0-0-0,
granted at 2018-01-20 10:59:52
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:metadata
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0, len=0, pid
= 3420, owner=d8b9372c397f0000, client=0x7f8858410be0,
connection-id=ovirt8z2.xxx.com-5652-2017/12/27-09:49:02:946825-zone2-ssd1-vmstor1-client-0-7-0,
granted at 2018-01-20 08:57:23
inodelk.inodelk[1](BLOCKED)=type=WRITE, whence=0, start=0, len=0,
pid = 18446744073709551610, owner=d0c6d857a87f0000,
client=0x7f885845efa0,
connection-id=sto2z2.xxx-10975-2018/01/20-10:56:14:649541-zone2-ssd1-vmstor1-client-0-0-0,
blocked at 2018-01-20 10:59:52
I'd also like to add that volume had arbiter brick before crash
happened. We decided to remove it because we thought that it was
causing issues. However now I think that this was unnecessary. After
the crash arbiter logs had lots of messages like this:
[2018-01-20 10:19:36.515717] I [MSGID: 115072]
[server-rpc-fops.c:1640:server_setattr_cbk]
0-zone2-ssd1-vmstor1-server: 37374187: SETATTR
<gfid:a52055bd-e2e9-42dd-92a3-e96b693bcafe>
(a52055bd-e2e9-42dd-92a3-e96b693bcafe) ==> (Operation not permitted)
[Operation not permitted]
Is there anyways to force self heal to stop? Any help would be very
much appreciated :)
Exposing .shard to a normal mount is opening a can of worms. You
should probably look at mounting the volume with gfid aux-mount where
you can access a file with <path-to-mount>/.gfid/<gfid-string>to clear
locks on it.
Mount command: mount -t glusterfs -o aux-gfid-mount vm1:test
/mnt/testvol
A gfid string will have some hyphens like:
11118443-1894-4273-9340-4b212fa1c0e4
That said. Next disconnect on the brick where you successfully did the
clear-locks will crash the brick. There was a bug in 3.8.x series with
clear-locks which was fixed in 3.9.0 with a feature. The self-heal
deadlocks that you witnessed also is fixed in 3.10 version of the
release.
Thank you the answer. Could you please tell more about crash? What will
actually happen or is there a bug report about it? Just want to make
sure that we can do everything to secure data on bricks. We will look
into upgrade but we have to make sure that new version works for us and
of course get self healing working before doing anything :)
Br,
Samuli
3.8.x is EOLed, so I recommend you to upgrade to a supported version
soon.
Best regards,
Samuli Heinonen
Samuli Heinonen
20 January 2018 at 21.57
Hi all!
One hypervisor on our virtualization environment crashed and now
some of the VM images cannot be accessed. After investigation we
found out that there was lots of images that still had active lock
on crashed hypervisor. We were able to remove locks from "regular
files", but it doesn't seem possible to remove locks from shards.
We are running GlusterFS 3.8.15 on all nodes.
Here is part of statedump that shows shard having active lock on
crashed node:
[xlator.features.locks.zone2-ssd1-vmstor1-locks.inode]
path=/.shard/75353c17-d6b8-485d-9baf-fd6c700e39a1.21
mandatory=0
inodelk-count=1
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:metadata
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0:self-heal
lock-dump.domain.domain=zone2-ssd1-vmstor1-replicate-0
inodelk.inodelk[0](ACTIVE)=type=WRITE, whence=0, start=0, len=0,
pid = 3568, owner=14ce372c397f0000, client=0x7f3198388770,
connection-id
ovirt8z2.xxx-5652-2017/12/27-09:49:02:946825-zone2-ssd1-vmstor1-client-1-7-0,
granted at 2018-01-20 08:57:24
If we try to run clear-locks we get following error message:
# gluster volume clear-locks zone2-ssd1-vmstor1
/.shard/75353c17-d6b8-485d-9baf-fd6c700e39a1.21 kind all inode
Volume clear-locks unsuccessful
clear-locks getxattr command failed. Reason: Operation not
permitted
Gluster vol info if needed:
Volume Name: zone2-ssd1-vmstor1
Type: Replicate
Volume ID: b6319968-690b-4060-8fff-b212d2295208
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 2 = 2
Transport-type: rdma
Bricks:
Brick1: sto1z2.xxx:/ssd1/zone2-vmstor1/export
Brick2: sto2z2.xxx:/ssd1/zone2-vmstor1/export
Options Reconfigured:
cluster.shd-wait-qlength: 10000
cluster.shd-max-threads: 8
cluster.locking-scheme: granular
performance.low-prio-threads: 32
cluster.data-self-heal-algorithm: full
performance.client-io-threads: off
storage.linux-aio: off
performance.readdir-ahead: on
client.event-threads: 16
server.event-threads: 16
performance.strict-write-ordering: off
performance.quick-read: off
performance.read-ahead: on
performance.io-cache: off
performance.stat-prefetch: off
cluster.eager-lock: enable
network.remote-dio: on
cluster.quorum-type: none
network.ping-timeout: 22
performance.write-behind: off
nfs.disable: on
features.shard: on
features.shard-block-size: 512MB
storage.owner-uid: 36
storage.owner-gid: 36
performance.io-thread-count: 64
performance.cache-size: 2048MB
performance.write-behind-window-size: 256MB
server.allow-insecure: on
cluster.ensure-durability: off
config.transport: rdma
server.outstanding-rpc-limit: 512
diagnostics.brick-log-level: INFO
Any recommendations how to advance from here?
Best regards,
Samuli Heinonen
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users [1]
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users [1]
--
Pranith
Links:
------
[1] http://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users
