Re: Gluster install using Ganesha for NFS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,


Why change to storhaug ? and whats going to happen to the current setup if i want to update Gluster to 3.11 or beyond ?



--

Respectfully
Mahdi A. Mahdi



From: gluster-users-bounces@xxxxxxxxxxx <gluster-users-bounces@xxxxxxxxxxx> on behalf of Kaleb S. KEITHLEY <kkeithle@xxxxxxxxxx>
Sent: Thursday, July 6, 2017 8:31:34 PM
To: Anthony Valentine; Gluster Users
Subject: Re: Gluster install using Ganesha for NFS
 

After 3.10 you'd need to use storhaug.... Which.... doesn't work (yet).

You need to use 3.10 for now.

On 07/06/2017 12:53 PM, Anthony Valentine wrote:
> I'm running this on CentOS 7.3
>
> [root@glustertest1 ~]# cat /etc/redhat-release
> CentOS Linux release 7.3.1611 (Core)
>
>
> Here are the software versions I have installed.
>
> [root@glustertest1 ~]# rpm -qa | egrep -i "nfs|gluster|ganesha"
> glusterfs-api-3.11.0-0.1.rc0.el7.x86_64
> glusterfs-server-3.11.0-0.1.rc0.el7.x86_64
> glusterfs-libs-3.11.0-0.1.rc0.el7.x86_64
> nfs-ganesha-gluster-2.4.5-1.el7.x86_64
> nfs-ganesha-utils-2.4.5-1.el7.x86_64
> centos-release-gluster310-1.0-1.el7.centos.noarch
> nfs-utils-1.3.0-0.33.el7_3.x86_64
> glusterfs-3.11.0-0.1.rc0.el7.x86_64
> nfs-ganesha-2.4.5-1.el7.x86_64
> libnfsidmap-0.25-15.el7.x86_64
> glusterfs-client-xlators-3.11.0-0.1.rc0.el7.x86_64
> glusterfs-cli-3.11.0-0.1.rc0.el7.x86_64
> glusterfs-fuse-3.11.0-0.1.rc0.el7.x86_64
>
> -----Original Message-----
> From: Kaleb S. KEITHLEY [mailto:kkeithle@xxxxxxxxxx]
> Sent: Thursday, July 6, 2017 10:49 AM
> To: Anthony Valentine <anthony.valentine@xxxxxxxx>
> Subject: Re: Gluster install using Ganesha for NFS
>
> On 07/06/2017 12:42 PM, Anthony Valentine wrote:
>> Hello!
>>
>> I am attempting to setup a Gluster install using Ganesha for NFS using
>> the guide found here
>> http://blog.gluster.org/2015/10/linux-scale-out-nfsv4-using-nfs-ganesh
>> a-and-glusterfs-one-step-at-a-time/
>>
>>
>> The Gluster portion is working fine, however when I try to setup
>> Ganesha I have a problem.  The guide says to run 'gluster nfs-ganesha enable'
>> however when I do, I get the following error:
>>
>>                   [root@glustertest1 ~]# gluster nfs-ganesha enable
>>
>> unrecognized word: nfs-ganesha (position 0)
>>
>> Has this command changed?  If so, what is the new command?  If not,
>> why would I be getting this error?
>>
>> Is there a more recent guide that I should be following?
>
> It could use some updating but it's mostly accurate.
>
> What version of gluster? That command should work.
>
> --
>
> Kaleb
>
>
>
>

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux