On Sun, Jul 2, 2017 at 5:38 AM, Mike DePaulo <mikedep333@xxxxxxxxx> wrote:
Hi everyone,
I have ovirt 4.1.1/4.1.2 running on 3 hosts with a gluster hosted engine.
I was working on setting up a network for gluster storage and
migration. The addresses for it will be 10.0.20.x, rather than
192.168.1.x for the management network. However, I switched gluster
storage and migration back over to the management network.
I updated and rebooted one of my hosts (death-star, 10.0.20.52) and on
reboot, the glusterd service would start, but wouldn't seem to work.
The engine webgui reported that its bricks were down, and commands
like this would fail:
[root@death-star glusterfs]# gluster pool list
pool list: failed
[root@death-star glusterfs]# gluster peer status
peer status: failed
Upon further investigation, I had under /var/lib/glusterd/peers/ the 2
existing UUID files, plus a new 3rd one:
[root@death-star peers]# cat 10.0.20.53
uuid=00000000-0000-0000-0000-000000000000
state=0
hostname1=10.0.20.53
[Adding gluster-users]
How did you add this peer "10.0.20.53"? Is this another interface for an existing peer?
I moved that file out of there, restarted glusterd, and now gluster is
working again.
I am guessing that this is a bug. Let me know if I should attach other
log files; I am not sure which ones.
And yes, 10.0.20.53 is the IP of one of the other hosts.
-Mike
_______________________________________________
Users mailing list
Users@xxxxxxxxx
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-users
