>> As you can see from my previous email that the RDMA connection tested with qperf.
I think you have wrong command. Your testing TCP & not RDMA.
Also check if you have RDMA & IB modules loaded on your hosts.
root@clei26 ~]# qperf clei22.vib
tcp_bw tcp_lat
tcp_bw:
bw = 475 MB/sec
tcp_lat:
latency = 52.8 us
[root@clei26 ~]#
Please run below command to test RDMA
[root@storageN2 ~]# qperf storageN1
ud_lat ud_bw
ud_lat:
latency = 7.51 us
ud_bw:
send_bw = 9.21 GB/sec
recv_bw = 9.21 GB/sec
[root@sc-sdgx-202 ~]#
Read qperf man pages for more info.
* To run a TCP bandwidth and latency test:
qperf myserver tcp_bw tcp_lat
* To run a UDP latency test and then cause the server to terminate:
qperf myserver udp_lat quit
* To measure the RDMA UD latency and bandwidth:
qperf myserver ud_lat ud_bw
* To measure RDMA UC bi-directional bandwidth:
qperf myserver rc_bi_bw
* To get a range of TCP latencies with a message size from 1 to 64K
qperf myserver -oo msg_size:1:64K:*2 -vu tcp_lat
Check if you have RDMA & IB modules loaded
lsmod | grep -i ib
lsmod | grep -i rdma
--
Deepak
From: Arman Khalatyan [mailto:arm2arm@xxxxxxxxx]
Sent: Thursday, March 02, 2017 10:57 PM
To: Deepak Naidu
Cc: Rafi Kavungal Chundattu Parambil; gluster-users@xxxxxxxxxxx; users; Sahina Bose
Subject: RE: [Gluster-users] [ovirt-users] Hot to force glusterfs to use RDMA?
Dear Deepak, thank you for the hints, which gluster are you using?
As you can see from my previous email that the RDMA connection tested with qperf. It is working as expected. In my case the clients are servers as well, they are hosts for the ovirt. Disabling selinux is nor recommended by ovirt, but i
will give a try.
Am 03.03.2017 7:50 vorm. schrieb "Deepak Naidu" <dnaidu@xxxxxxxxxx>:
I have been testing glusterfs over RDMA & below is the command I use. Reading up the logs, it looks
like your IB(InfiniBand) device is not being initialized. I am not sure if u have an issue on the client IB or the storage server IB. Also have you configured ur IB devices correctly. I am using IPoIB.
Can you check your firewall, disable selinux, I think, you might have checked it already ?
mount -t glusterfs -o transport=rdma storageN1:/vol0 /mnt/vol0
·
The below error seems if you have issue starting your volume. I had issue, when my transport was set to tcp,rdma. I had to force start my volume. If I had set it only
to tcp on the volume, the volume would start easily.
[2017-03-02 11:49:47.829391] E [MSGID: 114022] [client.c:2530:client_init_rpc] 0-GluReplica-client-2: failed to initialize RPC
[2017-03-02 11:49:47.829413] E [MSGID: 101019] [xlator.c:433:xlator_init] 0-GluReplica-client-2: Initialization of volume 'GluReplica-client-2' failed, review your volfile again
[2017-03-02 11:49:47.829425] E [MSGID: 101066] [graph.c:324:glusterfs_graph_init] 0-GluReplica-client-2: initializing translator failed
[2017-03-02 11:49:47.829436] E [MSGID: 101176] [graph.c:673:glusterfs_graph_activate] 0-graph: init failed
·
The below error seems if you have issue with IB device. If not configured properly.
[2017-03-02 11:49:47.828996] W [MSGID: 103071] [rdma.c:4589:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed [No such
device]
[2017-03-02 11:49:47.829067] W [MSGID: 103055] [rdma.c:4896:init] 0-GluReplica-client-2: Failed to initialize IB Device
[2017-03-02 11:49:47.829080] W [rpc-transport.c:354:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed
--
Deepak
From:
gluster-users-bounces@xxxxxxxxxxx [mailto:gluster-users-bounces@xxxxxxxxxxx]
On Behalf Of Sahina Bose
Sent: Thursday, March 02, 2017 10:26 PM
To: Arman Khalatyan;
gluster-users@xxxxxxxxxxx; Rafi Kavungal Chundattu Parambil
Cc: users
Subject: Re: [Gluster-users] [ovirt-users] Hot to force glusterfs to use RDMA?
[Adding gluster users to help with error]
[2017-03-02 11:49:47.828996] W [MSGID: 103071] [rdma.c:4589:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]
On Thu, Mar 2, 2017 at 5:36 PM, Arman Khalatyan <arm2arm@xxxxxxxxx> wrote:
BTW RDMA is working as expected:
root@clei26 ~]# qperf clei22.vib tcp_bw tcp_lat
tcp_bw:
bw = 475 MB/sec
tcp_lat:
latency = 52.8 us
[root@clei26 ~]#
thank you beforehand.
Arman.
On Thu, Mar 2, 2017 at 12:54 PM, Arman Khalatyan <arm2arm@xxxxxxxxx> wrote:
just for reference:
gluster volume info
Volume Name: GluReplica
Type: Replicate
Volume ID: ee686dfe-203a-4caa-a691-26353460cc48
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp,rdma
Bricks:
Brick1: 10.10.10.44:/zclei22/01/glu
Brick2: 10.10.10.42:/zclei21/01/glu
Brick3: 10.10.10.41:/zclei26/01/glu (arbiter)
Options Reconfigured:
network.ping-timeout: 30
server.allow-insecure: on
storage.owner-gid: 36
storage.owner-uid: 36
cluster.data-self-heal-algorithm: full
features.shard: on
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
performance.readdir-ahead: on
nfs.disable: on
[root@clei21 ~]# gluster volume status
Status of volume: GluReplica
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick 10.10.10.44:/zclei22/01/glu 49158 49159 Y 15870
Brick 10.10.10.42:/zclei21/01/glu 49156 49157 Y 17473
Brick 10.10.10.41:/zclei26/01/glu 49153 49154 Y 18897
Self-heal Daemon on localhost N/A N/A Y 17502
Self-heal Daemon on 10.10.10.41 N/A N/A Y 13353
Self-heal Daemon on 10.10.10.44 N/A N/A Y 32745
Task Status of Volume GluReplica
------------------------------------------------------------------------------
There are no active volume tasks
On Thu, Mar 2, 2017 at 12:52 PM, Arman Khalatyan <arm2arm@xxxxxxxxx> wrote:
I am not able to mount with RDMA over cli....
Are there some volfile parameters needs to be tuned?
/usr/bin/mount -t glusterfs -o backup-volfile-servers=10.10.10.44:10.10.10.42:10.10.10.41,transport=rdma 10.10.10.44:/GluReplica /mnt
[2017-03-02 11:49:47.795511] I [MSGID: 100030] [glusterfsd.c:2454:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.8.9 (args: /usr/sbin/glusterfs --volfile-server=10.10.10.44 --volfile-server=10.10.10.44 --volfile-server=10.10.10.42
--volfile-server=10.10.10.41 --volfile-server-transport=rdma --volfile-id=/GluReplica.rdma /mnt)
[2017-03-02 11:49:47.812699] I [MSGID: 101190] [event-epoll.c:628:event_dispatch_epoll_worker] 0-epoll: Started thread with index 1
[2017-03-02 11:49:47.825210] I [MSGID: 101190] [event-epoll.c:628:event_dispatch_epoll_worker] 0-epoll: Started thread with index 2
[2017-03-02 11:49:47.828996] W [MSGID: 103071] [rdma.c:4589:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]
[2017-03-02 11:49:47.829067] W [MSGID: 103055] [rdma.c:4896:init] 0-GluReplica-client-2: Failed to initialize IB Device
[2017-03-02 11:49:47.829080] W [rpc-transport.c:354:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed
[2017-03-02 11:49:47.829272] W [rpc-clnt.c:1070:rpc_clnt_connection_init] 0-GluReplica-client-2: loading of new rpc-transport failed
[2017-03-02 11:49:47.829325] I [MSGID: 101053] [mem-pool.c:641:mem_pool_destroy] 0-GluReplica-client-2: size=588 max=0 total=0
[2017-03-02 11:49:47.829371] I [MSGID: 101053] [mem-pool.c:641:mem_pool_destroy] 0-GluReplica-client-2: size=124 max=0 total=0
[2017-03-02 11:49:47.829391] E [MSGID: 114022] [client.c:2530:client_init_rpc] 0-GluReplica-client-2: failed to initialize RPC
[2017-03-02 11:49:47.829413] E [MSGID: 101019] [xlator.c:433:xlator_init] 0-GluReplica-client-2: Initialization of volume 'GluReplica-client-2' failed, review your volfile again
[2017-03-02 11:49:47.829425] E [MSGID: 101066] [graph.c:324:glusterfs_graph_init] 0-GluReplica-client-2: initializing translator failed
[2017-03-02 11:49:47.829436] E [MSGID: 101176] [graph.c:673:glusterfs_graph_activate] 0-graph: init failed
[2017-03-02 11:49:47.830003] W [glusterfsd.c:1327:cleanup_and_exit] (-->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x3c1) [0x7f524c9dbeb1] -->/usr/sbin/glusterfs(glusterfs_process_volfp+0x172) [0x7f524c9d65d2] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x7f524c9d5b4b]
) 0-: received signum (1), shutting down
[2017-03-02 11:49:47.830053] I [fuse-bridge.c:5794:fini] 0-fuse: Unmounting '/mnt'.
[2017-03-02 11:49:47.831014] W [glusterfsd.c:1327:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7dc5) [0x7f524b343dc5] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x7f524c9d5cd5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x7f524c9d5b4b] ) 0-: received
signum (15), shutting down
[2017-03-02 11:49:47.831014] W [glusterfsd.c:1327:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7dc5) [0x7f524b343dc5] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x7f524c9d5cd5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x7f524c9d5b4b] ) 0-: received
signum (15), shutting down
On Thu, Mar 2, 2017 at 12:11 PM, Sahina Bose <sabose@xxxxxxxxxx> wrote:
You will need to pass additional mount options while creating the storage domain (transport=rdma)
Please let us know if this works.
Are there way to force the connections over RDMA only?
If I check host mounts I cannot see rdma mount option:
mount -l| grep gluster
10.10.10.44:/GluReplica on /rhev/data-center/mnt/glusterSD/10.10.10.44:_GluReplica type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)
I have glusterized 3 nodes:
GluReplica
Volume ID:
ee686dfe-203a-4caa-a691-26353460cc48
Volume Type:
Replicate (Arbiter)
Replica Count:
2 + 1
Number of Bricks:
3
Transport Types:
TCP, RDMA
Maximum no of snapshots:
256
Capacity:
3.51 TiB total, 190.56 GiB used, 3.33 TiB free
_______________________________________________
Users mailing list
Users@xxxxxxxxx
http://lists.ovirt.org/mailman/listinfo/users
This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact
the sender by reply email and destroy all copies of the original message.
|
