Re: [ovirt-users] Hot to force glusterfs to use RDMA?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Arman,


On 03/03/2017 12:27 PM, Arman Khalatyan wrote:
Dear Deepak, thank you for the hints, which gluster are you using?
As you can see from my previous email that the RDMA connection tested with qperf. It is working as expected. In my case the clients are servers as well, they are hosts for the ovirt. Disabling selinux is nor recommended by ovirt, but i will give a try.

Gluster use IPoIB as mentioned by Deepak. So qperf with default options may not be a good choice to test IPoIB. Because it will fallback to any link available between the mentioned server and client. You can force this behavior, please refer the link [1].

In addition to that, Can you please provide your gluster version, glusterd logs and brick logs. Because since it complains about absence of the device, mostly it could be a set up issue. Otherwise it could have been a permission denied error, I'm not completely ruling out the possibility of selinux preventing the creation if IB channel. We had this issue in rhel which is fixed in 7.2 [2] .


[1] : https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Networking_Guide/sec-Testing_an_RDMA_network_after_IPoIB_is_configured.html
[2] : https://bugzilla.redhat.com/show_bug.cgi?id=1386620

Regards
Rafi KC



Am 03.03.2017 7:50 vorm. schrieb "Deepak Naidu" <dnaidu@xxxxxxxxxx>:

I have been testing glusterfs over RDMA & below is the command I use. Reading up the logs, it looks like your IB(InfiniBand) device is not being initialized. I am not sure if u have an issue on the client IB or the storage server IB. Also have you configured ur IB devices correctly. I am using IPoIB.

Can you check your firewall, disable selinux, I think, you might have checked it already ?

 

mount -t glusterfs -o transport=rdma storageN1:/vol0 /mnt/vol0

 

 

·         The below error seems if you have issue starting your volume. I had issue, when my transport was set to tcp,rdma. I had to force start my volume. If I had set it only to tcp on the volume, the volume would start easily.

 

[2017-03-02 11:49:47.829391] E [MSGID: 114022] [client.c:2530:client_init_rpc] 0-GluReplica-client-2: failed to initialize RPC
[2017-03-02 11:49:47.829413] E [MSGID: 101019] [xlator.c:433:xlator_init] 0-GluReplica-client-2: Initialization of volume 'GluReplica-client-2' failed, review your volfile again
[2017-03-02 11:49:47.829425] E [MSGID: 101066] [graph.c:324:glusterfs_graph_init] 0-GluReplica-client-2: initializing translator failed
[2017-03-02 11:49:47.829436] E [MSGID: 101176] [graph.c:673:glusterfs_graph_activate] 0-graph: init failed


 

·         The below error seems if you have issue with IB device. If not configured properly.

 

[2017-03-02 11:49:47.828996] W [MSGID: 103071] [rdma.c:4589:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]
[2017-03-02 11:49:47.829067] W [MSGID: 103055] [rdma.c:4896:init] 0-GluReplica-client-2: Failed to initialize IB Device
[2017-03-02 11:49:47.829080] W [rpc-transport.c:354:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed


 

 

--

Deepak

 

 

From: gluster-users-bounces@gluster.org [mailto:gluster-users-bounces@gluster.org] On Behalf Of Sahina Bose
Sent: Thursday, March 02, 2017 10:26 PM
To: Arman Khalatyan; gluster-users@xxxxxxxxxxx; Rafi Kavungal Chundattu Parambil
Cc: users
Subject: Re: [ovirt-users] Hot to force glusterfs to use RDMA?

 

[Adding gluster users to help with error]

[2017-03-02 11:49:47.828996] W [MSGID: 103071] [rdma.c:4589:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]

 

On Thu, Mar 2, 2017 at 5:36 PM, Arman Khalatyan <arm2arm@xxxxxxxxx> wrote:

BTW RDMA is working as expected:
root@clei26 ~]# qperf clei22.vib  tcp_bw tcp_lat
tcp_bw:
    bw  =  475 MB/sec
tcp_lat:
    latency  =  52.8 us
[root@clei26 ~]#

thank you beforehand.

Arman.

 

On Thu, Mar 2, 2017 at 12:54 PM, Arman Khalatyan <arm2arm@xxxxxxxxx> wrote:

just for reference:
 gluster volume info
 
Volume Name: GluReplica
Type: Replicate
Volume ID: ee686dfe-203a-4caa-a691-26353460cc48
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp,rdma
Bricks:
Brick1: 10.10.10.44:/zclei22/01/glu
Brick2: 10.10.10.42:/zclei21/01/glu
Brick3: 10.10.10.41:/zclei26/01/glu (arbiter)
Options Reconfigured:
network.ping-timeout: 30
server.allow-insecure: on
storage.owner-gid: 36
storage.owner-uid: 36
cluster.data-self-heal-algorithm: full
features.shard: on
cluster.server-quorum-type: server
cluster.quorum-type: auto
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
performance.readdir-ahead: on
nfs.disable: on



[root@clei21 ~]# gluster volume status
Status of volume: GluReplica
Gluster process                             TCP Port  RDMA Port  Online  Pid
------------------------------------------------------------------------------
Brick 10.10.10.44:/zclei22/01/glu           49158     49159      Y       15870
Brick 10.10.10.42:/zclei21/01/glu           49156     49157      Y       17473
Brick 10.10.10.41:/zclei26/01/glu           49153     49154      Y       18897
Self-heal Daemon on localhost               N/A       N/A        Y       17502
Self-heal Daemon on 10.10.10.41             N/A       N/A        Y       13353
Self-heal Daemon on 10.10.10.44             N/A       N/A        Y       32745
 
Task Status of Volume GluReplica
------------------------------------------------------------------------------
There are no active volume tasks

 

On Thu, Mar 2, 2017 at 12:52 PM, Arman Khalatyan <arm2arm@xxxxxxxxx> wrote:

I am not able to mount with RDMA over cli....

Are there some volfile parameters needs to be tuned?
/usr/bin/mount  -t glusterfs  -o backup-volfile-servers=10.10.10.44:10.10.10.42:10.10.10.41,transport=rdma 10.10.10.44:/GluReplica /mnt

[2017-03-02 11:49:47.795511] I [MSGID: 100030] [glusterfsd.c:2454:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.8.9 (args: /usr/sbin/glusterfs --volfile-server=10.10.10.44 --volfile-server=10.10.10.44 --volfile-server=10.10.10.42 --volfile-server=10.10.10.41 --volfile-server-transport=rdma --volfile-id=/GluReplica.rdma /mnt)
[2017-03-02 11:49:47.812699] I [MSGID: 101190] [event-epoll.c:628:event_dispatch_epoll_worker] 0-epoll: Started thread with index 1
[2017-03-02 11:49:47.825210] I [MSGID: 101190] [event-epoll.c:628:event_dispatch_epoll_worker] 0-epoll: Started thread with index 2
[2017-03-02 11:49:47.828996] W [MSGID: 103071] [rdma.c:4589:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm event channel creation failed [No such device]
[2017-03-02 11:49:47.829067] W [MSGID: 103055] [rdma.c:4896:init] 0-GluReplica-client-2: Failed to initialize IB Device
[2017-03-02 11:49:47.829080] W [rpc-transport.c:354:rpc_transport_load] 0-rpc-transport: 'rdma' initialization failed
[2017-03-02 11:49:47.829272] W [rpc-clnt.c:1070:rpc_clnt_connection_init] 0-GluReplica-client-2: loading of new rpc-transport failed
[2017-03-02 11:49:47.829325] I [MSGID: 101053] [mem-pool.c:641:mem_pool_destroy] 0-GluReplica-client-2: size=588 max=0 total=0
[2017-03-02 11:49:47.829371] I [MSGID: 101053] [mem-pool.c:641:mem_pool_destroy] 0-GluReplica-client-2: size=124 max=0 total=0
[2017-03-02 11:49:47.829391] E [MSGID: 114022] [client.c:2530:client_init_rpc] 0-GluReplica-client-2: failed to initialize RPC
[2017-03-02 11:49:47.829413] E [MSGID: 101019] [xlator.c:433:xlator_init] 0-GluReplica-client-2: Initialization of volume 'GluReplica-client-2' failed, review your volfile again
[2017-03-02 11:49:47.829425] E [MSGID: 101066] [graph.c:324:glusterfs_graph_init] 0-GluReplica-client-2: initializing translator failed
[2017-03-02 11:49:47.829436] E [MSGID: 101176] [graph.c:673:glusterfs_graph_activate] 0-graph: init failed
[2017-03-02 11:49:47.830003] W [glusterfsd.c:1327:cleanup_and_exit] (-->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x3c1) [0x7f524c9dbeb1] -->/usr/sbin/glusterfs(glusterfs_process_volfp+0x172) [0x7f524c9d65d2] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x7f524c9d5b4b] ) 0-: received signum (1), shutting down
[2017-03-02 11:49:47.830053] I [fuse-bridge.c:5794:fini] 0-fuse: Unmounting '/mnt'.
[2017-03-02 11:49:47.831014] W [glusterfsd.c:1327:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7dc5) [0x7f524b343dc5] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x7f524c9d5cd5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x7f524c9d5b4b] ) 0-: received signum (15), shutting down
[2017-03-02 11:49:47.831014] W [glusterfsd.c:1327:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7dc5) [0x7f524b343dc5] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x7f524c9d5cd5] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x7f524c9d5b4b] ) 0-: received signum (15), shutting down


 

On Thu, Mar 2, 2017 at 12:11 PM, Sahina Bose <sabose@xxxxxxxxxx> wrote:

You will need to pass additional mount options while creating the storage domain (transport=rdma)

Please let us know if this works.

 

On Thu, Mar 2, 2017 at 2:42 PM, Arman Khalatyan <arm2arm@xxxxxxxxx> wrote:

Hi,

Are there way to force the connections over RDMA only?

If I check host mounts I cannot see rdma mount option:
 mount -l| grep gluster
10.10.10.44:/GluReplica on /rhev/data-center/mnt/glusterSD/10.10.10.44:_GluReplica type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)

I have glusterized 3 nodes:

GluReplica
Volume ID:
ee686dfe-203a-4caa-a691-26353460cc48
Volume Type:
Replicate (Arbiter)
Replica Count:
2 + 1
Number of Bricks:
3
Transport Types:
TCP, RDMA
Maximum no of snapshots:
256
Capacity:
3.51 TiB total, 190.56 GiB used, 3.33 TiB free

 

_______________________________________________
Users mailing list
Users@xxxxxxxxx
http://lists.ovirt.org/mailman/listinfo/users

 

 

 

 

 


This email message is for the sole use of the intended recipient(s) and may contain confidential information.  Any unauthorized review, use, disclosure or distribution is prohibited.  If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.



_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux