Re: Comparison with other SDS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gandalf,

Can you provide more information about your setup?
How many nodes? What disk sizes? Are they VMs or physical machines? What is the speed of the network?
What OS are you running Lizard on , and finally how are the disks setup?

We use MooseFS, Nexenta, Gluster and Ceph here, and in our tests we see very little difference in speeds.
Some of these setups have advantages with many clients writing at once.

Thanks,

----- Mensagem original -----
De: "Gandalf Corvotempesta" <gandalf.corvotempesta@xxxxxxxxx>
Para: "gluster-users" <Gluster-users@xxxxxxxxxxx>
Enviadas: Segunda-feira, 14 de novembro de 2016 9:00:00
Assunto:  Comparison with other SDS

I did a very simple and stupid LizardFS installation this weekend.
Same configuration as gluster, same nodes, same disks. Both set with
replica 2, same ZFS filesystem on each disks/bricks

LizardFS installation took 10 minutes on all servers (1 client that
i've also used as master and 2 chunkservers), Gluster took less than 5
minutes from 0 to a working cluster. (just apt-get, gluster peer probe
and volume create)

Performances:
extracting this:
https://cdn.kernel.org/pub/linux/kernel/v4.x/testing/linux-4.9-rc5.tar.xz
took 45 minutes (forty-five minutes) on Gluster, 4 minutes (four
minutes) on LizardFS. It's not a typo. 45 minutes vs 4.

removing the whole directory tree: in Lizard less than 4 minutes, in
gluster i've stopped the process after about 20 minutes.

Both were configured with sharding (64M). LizardFS/MooseFS has this hardcoded.

Can this be related to the metadata server? I don't think so. Gluster
is able to know where a file is without asking to the brick servers.
In fact, gluster should be faster, as there isn't any query to make to
a metadata server when reading/writing.

Failures: LizardFS detect properly a missing/corrupted (like bitrot)
chunk but I was unable to understand it's recovery process. I've not
tried the bit-rot feature in gluster.

Can someone explain me why Lizard is 10 times faster than gluster?
This is not a flame, I would only like to know the technical
differences between these two software
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux