Re: [Gluster-devel] Being Gluster NFS off

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Just to clarify my patch only takes care of introducing the required changes in 3.9 and not in 3.8. A seperate patch needs to be sent out to ensure nfs service comes up for the volumes which were created pre upgrade to 3.8 and have default configuration.

On Monday 10 October 2016, Jiffin Tony Thottan <jthottan@xxxxxxxxxx> wrote:
Hi all,

I am trying to list out  glusterd issues with the 3.8 feature "Gluster NFS being off by default".

As per current implementation,

1.) On a freshly installed setup with 3.8/3.9, if u create a volume, then Gluster NFS won't

     come by default and in the vol info we can see " nfs.disable on"

2.) For existing volumes(created in 3.7 or below), there are two possibilities

a.) if there are only volumes with default configuration, Gluster NFS won't come up and in

     vol info "nfs.disable on" won't displayed. In volume status command pid of Gluster NFS

    will be N/A.

b.) if there is a volume with explicit "nfs.disable off" set , then after upgrade Gluster NFS will

come and export all the existing volumes and vol info will have similar value as a.)

Currently three bugs[1,2,3] have opened to address these issues.

As per 3.8 release note, gluster nfs should be up for all existing volumes with default

configuration. We are planning to change this behavior from 3.9 onwards and Atin send out a patch[4]

With his patch after upgrade all the existing volumes with default configuration will have

nfs.disable value set to on explicitly in the vol info. So Gluster NFS won't export that volume at all

and gluster v status does not display status of Gluster NFS server.

This patch also solves bugs 2 and 3 as well

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1383006 - gluster nfs not coming for existing volumes on 3.8

[2] https://bugzilla.redhat.com/show_bug.cgi?id=1383005 - getting n/a entry in volume status command

[3] https://bugzilla.redhat.com/show_bug.cgi?id=1379223 - nfs.disable: on" is not showing in Vol info by default
                              for the 3.7.x volumes after updating to 3.9.0

[4] http://review.gluster.org/#/c/15568/

Regards,
Jiffin

_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-devel


--
--Atin
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux