Hi,
I'm using gluster 3.7.5 and I'm trying to get port bonding working properly with the gluster protocol. I've bonded the NICs using round robin because I also bond it at the switch level with link aggregation. I've used this type of bonding without a problem with my other applications but for some reason gluster does not want to utilize all 3 NICs for writes but it does for reads... any of you come across this or know why? Here's the output of the traffic on the NICs you can see that RX is unbalanced but TX is completely balanced across the 3 NICs. I've tried both mounting via glusterfs or nfs, both result in the same imbalance. Am I missing some configuration?
root@e-gluster-01:~# ifconfig
bond0 Link encap:Ethernet
inet addr:xxxxxxxxxxxx Bcast:128.33.23.255 Mask:255.255.248.0
inet6 addr: fe80::46a8:42ff:fe43:8817/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:160972852 errors:0 dropped:0 overruns:0 frame:0
TX packets:122295229 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:152800624950 (142.3 GiB) TX bytes:138720356365 (129.1 GiB)
em1 Link encap:Ethernet
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:160793725 errors:0 dropped:0 overruns:0 frame:0
TX packets:40763142 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:152688146880 (142.2 GiB) TX bytes:46239971255 (43.0 GiB)
Interrupt:41
em2 Link encap:Ethernet
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:92451 errors:0 dropped:0 overruns:0 frame:0
TX packets:40750031 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9001370 (8.5 MiB) TX bytes:46216513162 (43.0 GiB)
Interrupt:45
em3 Link encap:Ethernet
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:86676 errors:0 dropped:0 overruns:0 frame:0
TX packets:40782056 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:103476700 (98.6 MiB) TX bytes:46263871948 (43.0 GiB)
Interrupt:40
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxxhttp://www.gluster.org/mailman/listinfo/gluster-users