Hello Rafi,
Thanks for the reply please see my answers below
On Sat, Sep 3, 2016 at 12:07 AM, Mohammed Rafi K C <rkavunga@xxxxxxxxxx> wrote:
Hi Benjamin,
Can you tell us more about your work-load like the file size
Files are a range from 10GB test file generated from /dev/urandom, many 100MB folder separated files to smaller images and text files
This is a lab so typically there is no load, in the case of my testing this issue the only file being accessed was the 10GB test file.
, size of both hot and cold storage
Hot storage is a 315GB portion of a 512GB SSD
Cold storage is a replica made up of 3 bricks on two nodes. totaling 17TB
how the files are created (after attaching the tier or before attaching the tier)
I've experienced performance issues with files created before hot attachment, 10GB test file, and copying files to the volume after attachment (100MB files)
, how long have you been using the tier volume, etc.
At the moment I am not using the hot tier after discovering the performance loss. I originally turned on after learning of the feature a month or so ago. I feel like I may have actually had this issue since then because I have been troubleshooting a network throughalput issue since then that was contributing to a 4MB/s write to the volume. I recently resolved that issue and the 4MB/s write was still observed until I removed the hot tier.
Unfortunate timing on both issues.
Regards
Rafi KC
On 09/03/2016 09:16 AM, Benjamin Kingston wrote:
Hello all,
I've discovered an issue in my lab that went unnoticed until recently, or just came about with the latest Centos release.
When the SSD hot tier is enabled read from the volume is 2MB/s, after detaching AND committing, read of the same file is at 150MB/s to /dev/null
If I copy the file to the hot bricks directly the write is 150MB/s and read is 500MB/s on the first read, and then 4GB/s on the subsequent reads (filesystem RAM caching) to /dev/null
Just enabling tier storage takes the performance to ~10-20IOPS and 2-10MB/s even for local node mounted volume.
I don't see any major log issues and I detached and did a fix-layout, but it persists when re-enabling the tier.
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/ mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users