Re: [Gluster-devel] Gluster Brick Offline after reboot!!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Abhishek,

See the response inline.


On 05/04/2016 05:43 PM, ABHISHEK PALIWAL wrote:
> Hi Atin,
> 
> please reply, is there any configurable time out parameter for brick
> process to go offline which we can increase?
> 
> Regards,
> Abhishek
> 
> On Thu, Apr 21, 2016 at 12:34 PM, ABHISHEK PALIWAL
> <abhishpaliwal@xxxxxxxxx <mailto:abhishpaliwal@xxxxxxxxx>> wrote:
> 
>     Hi Atin,
> 
>     Please answer following doubts as well:
> 
>     1 .If there is a temporary glitch in the network , will that affect
>     the gluster brick process in anyway, Is there any timeout for the
>     brick process to go offline in case of the glitch in the network.
      If there is disconnection, GlusterD will receive it and mark the
brick as disconnected even if the brick process is online. So answer to
this question is both yes and no. From process perspective they are
still up but not to the other components/layers and that may impact the
operations (both mgmt & I/O given there is a disconnect between client
and brick processes too)
> 
>     2. Is there is any configurable time out parameter which we can
>     increase ?
I don't get this question. What time out are you talking about?
> 
>     3.Brick and glusterd connected by unix domain socket.It is just a
>     local socket then why it is disconnect in below logs:
      This is not true, its over TCP socket.
> 
>      1667 [2016-04-03 10:12:32.984331] I [MSGID: 106005]
>     [glusterd-handler.c:4908:__glusterd_brick_rpc_notify] 0-management:
>     Brick 10.32.       1.144:/opt/lvmdir/c2/brick has disconnected from
>     glusterd.
>      1668 [2016-04-03 10:12:32.984366] D [MSGID: 0]
>     [glusterd-utils.c:4872:glusterd_set_brick_status] 0-glusterd: Setting
>     brick 10.32.1.        144:/opt/lvmdir/c2/brick status to stopped
> 
>     Regards,
>     Abhishek
> 
> 
>     On Tue, Apr 19, 2016 at 1:12 PM, ABHISHEK PALIWAL
>     <abhishpaliwal@xxxxxxxxx <mailto:abhishpaliwal@xxxxxxxxx>> wrote:
> 
>         Hi Atin,
> 
>         Thanks.
> 
>         Have more doubts here.
> 
>         Brick and glusterd connected by unix domain socket.It is just a
>         local socket then why it is disconnect in below logs:
> 
>          1667 [2016-04-03 10:12:32.984331] I [MSGID: 106005]
>         [glusterd-handler.c:4908:__glusterd_brick_rpc_notify] 0-management:
>         Brick 10.32.       1.144:/opt/lvmdir/c2/brick has disconnected from
>         glusterd.
>          1668 [2016-04-03 10:12:32.984366] D [MSGID: 0]
>         [glusterd-utils.c:4872:glusterd_set_brick_status] 0-glusterd:
>         Setting
>         brick 10.32.1.        144:/opt/lvmdir/c2/brick status to stopped
> 
> 
>         Regards,
>         Abhishek
> 
> 
>         On Fri, Apr 15, 2016 at 9:14 AM, Atin Mukherjee
>         <amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>> wrote:
> 
> 
> 
>             On 04/14/2016 04:07 PM, ABHISHEK PALIWAL wrote:
>             >
>             >
>             > On Thu, Apr 14, 2016 at 2:33 PM, Atin Mukherjee <amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>             > <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>> wrote:
>             >
>             >
>             >
>             >     On 04/05/2016 03:35 PM, ABHISHEK PALIWAL wrote:
>             >     >
>             >     >
>             >     > On Tue, Apr 5, 2016 at 2:22 PM, Atin Mukherjee <amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
>             <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>
>             >     > <mailto:amukherj@xxxxxxxxxx
>             <mailto:amukherj@xxxxxxxxxx> <mailto:amukherj@xxxxxxxxxx
>             <mailto:amukherj@xxxxxxxxxx>>>> wrote:
>             >     >
>             >     >
>             >     >
>             >     >     On 04/05/2016 01:04 PM, ABHISHEK PALIWAL wrote:
>             >     >     > Hi Team,
>             >     >     >
>             >     >     > We are using Gluster 3.7.6 and facing one
>             problem in which
>             >     brick is not
>             >     >     > comming online after restart the board.
>             >     >     >
>             >     >     > To understand our setup, please look the
>             following steps:
>             >     >     > 1. We have two boards A and B on which Gluster
>             volume is
>             >     running in
>             >     >     > replicated mode having one brick on each board.
>             >     >     > 2. Gluster mount point is present on the Board
>             A which is
>             >     sharable
>             >     >     > between number of processes.
>             >     >     > 3. Till now our volume is in sync and
>             everthing is working fine.
>             >     >     > 4. Now we have test case in which we'll stop
>             the glusterd,
>             >     reboot the
>             >     >     > Board B and when this board comes up, starts
>             the glusterd
>             >     again on it.
>             >     >     > 5. We repeated Steps 4 multiple times to check the
>             >     reliability of system.
>             >     >     > 6. After the Step 4, sometimes system comes in
>             working state
>             >     (i.e. in
>             >     >     > sync) but sometime we faces that brick of
>             Board B is present in
>             >     >     >     “gluster volume status” command but not be
>             online even
>             >     waiting for
>             >     >     > more than a minute.
>             >     >     As I mentioned in another email thread until and
>             unless the
>             >     log shows
>             >     >     the evidence that there was a reboot nothing can
>             be concluded.
>             >     The last
>             >     >     log what you shared with us few days back didn't
>             give any
>             >     indication
>             >     >     that brick process wasn't running.
>             >     >
>             >     > How can we identify that the brick process is
>             running in brick logs?
>             >     >
>             >     >     > 7. When the Step 4 is executing at the same
>             time on Board A some
>             >     >     > processes are started accessing the files from
>             the Gluster
>             >     mount point.
>             >     >     >
>             >     >     > As a solution to make this brick online, we
>             found some
>             >     existing issues
>             >     >     > in gluster mailing list giving suggestion to
>             use “gluster
>             >     volume start
>             >     >     > <vol_name> force” to make the brick 'offline'
>             to 'online'.
>             >     >     >
>             >     >     > If we use “gluster volume start <vol_name>
>             force” command.
>             >     It will kill
>             >     >     > the existing volume process and started the
>             new process then
>             >     what will
>             >     >     > happen if other processes are accessing the
>             same volume at
>             >     the time when
>             >     >     > volume process is killed by this command
>             internally. Will it
>             >     impact any
>             >     >     > failure on these processes?
>             >     >     This is not true, volume start force will start
>             the brick
>             >     processes only
>             >     >     if they are not running. Running brick processes
>             will not be
>             >     >     interrupted.
>             >     >
>             >     > we have tried and check the pid of process before
>             force start and
>             >     after
>             >     > force start.
>             >     > the pid has been changed after force start.
>             >     >
>             >     > Please find the logs at the time of failure attached
>             once again with
>             >     > log-level=debug.
>             >     >
>             >     > if you can give me the exact line where you are able
>             to find out that
>             >     > the brick process
>             >     > is running in brick log file please give me the line
>             number of
>             >     that file.
>             >
>             >     Here is the sequence at which glusterd and respective
>             brick process is
>             >     restarted.
>             >
>             >     1. glusterd restart trigger - line number 1014 in
>             glusterd.log file:
>             >
>             >     [2016-04-03 10:12:29.051735] I [MSGID: 100030]
>             [glusterfsd.c:2318:main]
>             >     0-/usr/sbin/glusterd: Started running /usr/sbin/     
>                     glusterd
>             >     version 3.7.6 (args: /usr/sbin/glusterd -p
>             /var/run/glusterd.pid
>             >     --log-level DEBUG)
>             >
>             >     2. brick start trigger - line number 190 in
>             opt-lvmdir-c2-brick.log
>             >
>             >     [2016-04-03 10:14:25.268833] I [MSGID: 100030]
>             [glusterfsd.c:2318:main]
>             >     0-/usr/sbin/glusterfsd: Started running /usr/sbin/   
>                     glusterfsd
>             >     version 3.7.6 (args: /usr/sbin/glusterfsd -s
>             10.32.1.144 --volfile-id
>             >     c_glusterfs.10.32.1.144.opt-lvmdir-c2-brick -p /
>             >   
>              system/glusterd/vols/c_glusterfs/run/10.32.1.144-opt-lvmdir-c2-brick.pid
>             >     -S /var/run/gluster/697c0e4a16ebc734cd06fd9150723005. 
>                   socket
>             >     --brick-name /opt/lvmdir/c2/brick -l
>             >     /var/log/glusterfs/bricks/opt-lvmdir-c2-brick.log
>             --xlator-option
>             >     *-posix.glusterd-     
>              uuid=2d576ff8-0cea-4f75-9e34-a5674fbf7256
>             >     --brick-port 49329 --xlator-option
>             c_glusterfs-server.listen-port=49329)
>             >
>             >     3. The following log indicates that brick is up and is
>             now started.
>             >     Refer to line 16123 in glusterd.log
>             >
>             >     [2016-04-03 10:14:25.336855] D [MSGID: 0]
>             >     [glusterd-handler.c:4897:__glusterd_brick_rpc_notify]
>             0-management:
>             >     Connected to 10.32.1.144:/opt/lvmdir/c2/brick
>             >
>             >     This clearly indicates that the brick is up and
>             running as after that I
>             >     do not see any disconnect event been processed by
>             glusterd for the brick
>             >     process.
>             >
>             >
>             > Thanks for replying descriptively but please also clear
>             some more doubts:
>             >
>             > 1. At this 10:14:25 moment of time brick is available
>             because we have
>             > removed brick and added it again to make it online:
>             > following are the logs from cmd-history.log file of 000300
>             >
>             > [2016-04-03 10:14:21.446570]  : volume status : SUCCESS
>             > [2016-04-03 10:14:21.665889]  : volume remove-brick
>             c_glusterfs replica
>             > 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>             > [2016-04-03 10:14:21.764270]  : peer detach 10.32.1.144 :
>             SUCCESS
>             > [2016-04-03 10:14:23.060442]  : peer probe 10.32.1.144 :
>             SUCCESS
>             > [2016-04-03 10:14:25.649525]  : volume add-brick
>             c_glusterfs replica 2
>             > 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>             >
>             > and also 10:12:29 was the last reboot time before this
>             failure. So I am
>             > totally agree what you said earlier.
>             >
>             > 2 .As you said at 10:12:29 glusterd restarted then why we
>             are not
>             > getting 'brick start trigger' related logs
>             >  like below between 10:12:29 to 10:14:25 time stamp which
>             is something
>             > two minute of time interval.
>             So here is the culprit:
> 
>              1667 [2016-04-03 10:12:32.984331] I [MSGID: 106005]
>             [glusterd-handler.c:4908:__glusterd_brick_rpc_notify]
>             0-management:
>             Brick 10.32.       1.144:/opt/lvmdir/c2/brick has
>             disconnected from
>             glusterd.
>              1668 [2016-04-03 10:12:32.984366] D [MSGID: 0]
>             [glusterd-utils.c:4872:glusterd_set_brick_status]
>             0-glusterd: Setting
>             brick 10.32.1.        144:/opt/lvmdir/c2/brick status to stopped
> 
> 
>             GlusterD received a disconnect event for this brick process
>             and mark it
>             as stopped. This could happen due to two reasons. 1. brick
>             process goes
>             down or 2. Network issue. In this case its the later I
>             believe since the
>             brick process was running at that time. I'd request you to
>             check this
>             from the N/W side.
> 
> 
>             >
>             > [2016-04-03 10:14:25.268833] I [MSGID: 100030]
>             [glusterfsd.c:2318:main]
>             > 0-/usr/sbin/glusterfsd: Started running /usr/sbin/       
>                 glusterfsd
>             > version 3.7.6 (args: /usr/sbin/glusterfsd -s 10.32.1.144
>             --volfile-id
>             > c_glusterfs.10.32.1.144.opt-lvmdir-c2-brick -p /
>             >
>             system/glusterd/vols/c_glusterfs/run/10.32.1.144-opt-lvmdir-c2-brick.pid
>             > -S /var/run/gluster/697c0e4a16ebc734cd06fd9150723005.     
>               socket
>             > --brick-name /opt/lvmdir/c2/brick -l
>             > /var/log/glusterfs/bricks/opt-lvmdir-c2-brick.log
>             --xlator-option
>             > *-posix.glusterd-     
>              uuid=2d576ff8-0cea-4f75-9e34-a5674fbf7256
>             > --brick-port 49329 --xlator-option
>             c_glusterfs-server.listen-port=49329)
>             >
>             > 3. We are continuously checking brick status in the above
>             time duration
>             > using  "gluster volume status" refer the cmd-history.log
>             file from 000300
>             >
>             > In glusterd.log file we are also getting below logs
>             >
>             > [2016-04-03 10:12:31.771051] D [MSGID: 0]
>             > [glusterd-handler.c:4897:__glusterd_brick_rpc_notify]
>             0-management:
>             > Connected to 10.32.1.144:/opt/lvmdir/c2/brick
>             >
>             > [2016-04-03 10:12:32.981152] D [MSGID: 0]
>             > [glusterd-handler.c:4897:__glusterd_brick_rpc_notify]
>             0-management:
>             > Connected to 10.32.1.144:/opt/lvmdir/c2/brick
>             >
>             > two times b/w 10:12:29 and 10:14:25 and as you said these
>             logs  "
>             > clearly indicates that the brick is up and running as
>             after" then why
>             > brick is not online in "gluster volume status" command
>             >
>             > [2016-04-03 10:12:33.990487]  : volume status : SUCCESS
>             > [2016-04-03 10:12:34.007469]  : volume status : SUCCESS
>             > [2016-04-03 10:12:35.095918]  : volume status : SUCCESS
>             > [2016-04-03 10:12:35.126369]  : volume status : SUCCESS
>             > [2016-04-03 10:12:36.224018]  : volume status : SUCCESS
>             > [2016-04-03 10:12:36.251032]  : volume status : SUCCESS
>             > [2016-04-03 10:12:37.352377]  : volume status : SUCCESS
>             > [2016-04-03 10:12:37.374028]  : volume status : SUCCESS
>             > [2016-04-03 10:12:38.446148]  : volume status : SUCCESS
>             > [2016-04-03 10:12:38.468860]  : volume status : SUCCESS
>             > [2016-04-03 10:12:39.534017]  : volume status : SUCCESS
>             > [2016-04-03 10:12:39.553711]  : volume status : SUCCESS
>             > [2016-04-03 10:12:40.616610]  : volume status : SUCCESS
>             > [2016-04-03 10:12:40.636354]  : volume status : SUCCESS
>             > ......
>             > ......
>             > ......
>             > [2016-04-03 10:14:21.446570]  : volume status : SUCCESS
>             > [2016-04-03 10:14:21.665889]  : volume remove-brick
>             c_glusterfs replica
>             > 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>             > [2016-04-03 10:14:21.764270]  : peer detach 10.32.1.144 :
>             SUCCESS
>             > [2016-04-03 10:14:23.060442]  : peer probe 10.32.1.144 :
>             SUCCESS
>             > [2016-04-03 10:14:25.649525]  : volume add-brick
>             c_glusterfs replica 2
>             > 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>             >
>             > In above logs we are continuously checking brick status
>             but when we
>             > don't find brick status 'online' even after ~2 minutes
>             then we removed
>             > it and add it again to make it online.
>             >
>             > [2016-04-03 10:14:21.665889]  : volume remove-brick
>             c_glusterfs replica
>             > 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>             > [2016-04-03 10:14:21.764270]  : peer detach 10.32.1.144 :
>             SUCCESS
>             > [2016-04-03 10:14:23.060442]  : peer probe 10.32.1.144 :
>             SUCCESS
>             > [2016-04-03 10:14:25.649525]  : volume add-brick
>             c_glusterfs replica 2
>             > 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>             >
>             > that is why in logs we are gettting "brick start trigger
>             logs" at time
>             > stamp 10:14:25
>             >
>             > [2016-04-03 10:14:25.268833] I [MSGID: 100030]
>             [glusterfsd.c:2318:main]
>             > 0-/usr/sbin/glusterfsd: Started running /usr/sbin/       
>                 glusterfsd
>             > version 3.7.6 (args: /usr/sbin/glusterfsd -s 10.32.1.144
>             --volfile-id
>             > c_glusterfs.10.32.1.144.opt-lvmdir-c2-brick -p /
>             >
>             system/glusterd/vols/c_glusterfs/run/10.32.1.144-opt-lvmdir-c2-brick.pid
>             > -S /var/run/gluster/697c0e4a16ebc734cd06fd9150723005.     
>               socket
>             > --brick-name /opt/lvmdir/c2/brick -l
>             > /var/log/glusterfs/bricks/opt-lvmdir-c2-brick.log
>             --xlator-option
>             > *-posix.glusterd-     
>              uuid=2d576ff8-0cea-4f75-9e34-a5674fbf7256
>             > --brick-port 49329 --xlator-option
>             c_glusterfs-server.listen-port=49329)
>             >
>             >
>             > Regards,
>             > Abhishek
>             >
>             >
>             >     Please note that all the logs referred and pasted are
>             from 002500.
>             >
>             >     ~Atin
>             >     >
>             >     > 002500 - Board B that brick is offline
>             >     > 00300 - Board A logs
>             >     >
>             >     >     >
>             >     >     > *Question : What could be contributing to
>             brick offline?*
>             >     >     >
>             >     >     >
>             >     >     > --
>             >     >     >
>             >     >     > Regards
>             >     >     > Abhishek Paliwal
>             >     >     >
>             >     >     >
>             >     >     > _______________________________________________
>             >     >     > Gluster-devel mailing list
>             >     >     > Gluster-devel@xxxxxxxxxxx
>             <mailto:Gluster-devel@xxxxxxxxxxx>
>             <mailto:Gluster-devel@xxxxxxxxxxx
>             <mailto:Gluster-devel@xxxxxxxxxxx>>
>             >     <mailto:Gluster-devel@xxxxxxxxxxx
>             <mailto:Gluster-devel@xxxxxxxxxxx>
>             <mailto:Gluster-devel@xxxxxxxxxxx
>             <mailto:Gluster-devel@xxxxxxxxxxx>>>
>             >     >     >
>             http://www.gluster.org/mailman/listinfo/gluster-devel
>             >     >     >
>             >     >
>             >     >
>             >     >
>             >     >
>             >
>             >
>             >
>             >
>             > --
>             >
>             >
>             >
>             >
> 
> 
> 
> 
> 
> 
> -- 
> 
> 
> 
> 
> Regards
> Abhishek Paliwal
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users




[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux