Hi Atin,
please reply, is there any configurable time out parameter for brick process to go offline which we can increase?On Thu, Apr 21, 2016 at 12:34 PM, ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx> wrote:
AbhishekHi Atin,Please answer following doubts as well:
1 .If there is a temporary glitch in the network , will that affect the gluster brick process in anyway, Is there any timeout for the brick process to go offline in case of the glitch in the network.
2. Is there is any configurable time out parameter which we can increase ?
3.Brick and glusterd connected by unix domain socket.It is just a local socket then why it is disconnect in below logs:
1667 [2016-04-03 10:12:32.984331] I [MSGID: 106005]
[glusterd-handler.c:4908:__glusterd_brick_rpc_notify] 0-management:
Brick 10.32. 1.144:/opt/lvmdir/c2/brick has disconnected from
glusterd.
1668 [2016-04-03 10:12:32.984366] D [MSGID: 0]
[glusterd-utils.c:4872:glusterd_set_brick_status] 0-glusterd: Setting
brick 10.32.1. 144:/opt/lvmdir/c2/brick status to stopped
Regards,On Tue, Apr 19, 2016 at 1:12 PM, ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx> wrote:AbhishekRegards,Have more doubts here.Hi Atin,Thanks.
Brick and glusterd connected by unix domain socket.It is just a local socket then why it is disconnect in below logs:
1667 [2016-04-03 10:12:32.984331] I [MSGID: 106005]
[glusterd-handler.c:4908:__glusterd_brick_rpc_notify] 0-management:
Brick 10.32. 1.144:/opt/lvmdir/c2/brick has disconnected from
glusterd.
1668 [2016-04-03 10:12:32.984366] D [MSGID: 0]
[glusterd-utils.c:4872:glusterd_set_brick_status] 0-glusterd: Setting
brick 10.32.1. 144:/opt/lvmdir/c2/brick status to stopped
On Fri, Apr 15, 2016 at 9:14 AM, Atin Mukherjee <amukherj@xxxxxxxxxx> wrote:
On 04/14/2016 04:07 PM, ABHISHEK PALIWAL wrote:
>
>
> On Thu, Apr 14, 2016 at 2:33 PM, Atin Mukherjee <amukherj@xxxxxxxxxx
> <mailto:amukherj@xxxxxxxxxx>> wrote:
>
>
>
> On 04/05/2016 03:35 PM, ABHISHEK PALIWAL wrote:
> >
> >
> > On Tue, Apr 5, 2016 at 2:22 PM, Atin Mukherjee <amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>
So here is the culprit:> > <mailto:amukherj@xxxxxxxxxx <mailto:amukherj@xxxxxxxxxx>>> wrote:
> >
> >
> >
> > On 04/05/2016 01:04 PM, ABHISHEK PALIWAL wrote:
> > > Hi Team,
> > >
> > > We are using Gluster 3.7.6 and facing one problem in which
> brick is not
> > > comming online after restart the board.
> > >
> > > To understand our setup, please look the following steps:
> > > 1. We have two boards A and B on which Gluster volume is
> running in
> > > replicated mode having one brick on each board.
> > > 2. Gluster mount point is present on the Board A which is
> sharable
> > > between number of processes.
> > > 3. Till now our volume is in sync and everthing is working fine.
> > > 4. Now we have test case in which we'll stop the glusterd,
> reboot the
> > > Board B and when this board comes up, starts the glusterd
> again on it.
> > > 5. We repeated Steps 4 multiple times to check the
> reliability of system.
> > > 6. After the Step 4, sometimes system comes in working state
> (i.e. in
> > > sync) but sometime we faces that brick of Board B is present in
> > > “gluster volume status” command but not be online even
> waiting for
> > > more than a minute.
> > As I mentioned in another email thread until and unless the
> log shows
> > the evidence that there was a reboot nothing can be concluded.
> The last
> > log what you shared with us few days back didn't give any
> indication
> > that brick process wasn't running.
> >
> > How can we identify that the brick process is running in brick logs?
> >
> > > 7. When the Step 4 is executing at the same time on Board A some
> > > processes are started accessing the files from the Gluster
> mount point.
> > >
> > > As a solution to make this brick online, we found some
> existing issues
> > > in gluster mailing list giving suggestion to use “gluster
> volume start
> > > <vol_name> force” to make the brick 'offline' to 'online'.
> > >
> > > If we use “gluster volume start <vol_name> force” command.
> It will kill
> > > the existing volume process and started the new process then
> what will
> > > happen if other processes are accessing the same volume at
> the time when
> > > volume process is killed by this command internally. Will it
> impact any
> > > failure on these processes?
> > This is not true, volume start force will start the brick
> processes only
> > if they are not running. Running brick processes will not be
> > interrupted.
> >
> > we have tried and check the pid of process before force start and
> after
> > force start.
> > the pid has been changed after force start.
> >
> > Please find the logs at the time of failure attached once again with
> > log-level=debug.
> >
> > if you can give me the exact line where you are able to find out that
> > the brick process
> > is running in brick log file please give me the line number of
> that file.
>
> Here is the sequence at which glusterd and respective brick process is
> restarted.
>
> 1. glusterd restart trigger - line number 1014 in glusterd.log file:
>
> [2016-04-03 10:12:29.051735] I [MSGID: 100030] [glusterfsd.c:2318:main]
> 0-/usr/sbin/glusterd: Started running /usr/sbin/ glusterd
> version 3.7.6 (args: /usr/sbin/glusterd -p /var/run/glusterd.pid
> --log-level DEBUG)
>
> 2. brick start trigger - line number 190 in opt-lvmdir-c2-brick.log
>
> [2016-04-03 10:14:25.268833] I [MSGID: 100030] [glusterfsd.c:2318:main]
> 0-/usr/sbin/glusterfsd: Started running /usr/sbin/ glusterfsd
> version 3.7.6 (args: /usr/sbin/glusterfsd -s 10.32.1.144 --volfile-id
> c_glusterfs.10.32.1.144.opt-lvmdir-c2-brick -p /
> system/glusterd/vols/c_glusterfs/run/10.32.1.144-opt-lvmdir-c2-brick.pid
> -S /var/run/gluster/697c0e4a16ebc734cd06fd9150723005. socket
> --brick-name /opt/lvmdir/c2/brick -l
> /var/log/glusterfs/bricks/opt-lvmdir-c2-brick.log --xlator-option
> *-posix.glusterd- uuid=2d576ff8-0cea-4f75-9e34-a5674fbf7256
> --brick-port 49329 --xlator-option c_glusterfs-server.listen-port=49329)
>
> 3. The following log indicates that brick is up and is now started.
> Refer to line 16123 in glusterd.log
>
> [2016-04-03 10:14:25.336855] D [MSGID: 0]
> [glusterd-handler.c:4897:__glusterd_brick_rpc_notify] 0-management:
> Connected to 10.32.1.144:/opt/lvmdir/c2/brick
>
> This clearly indicates that the brick is up and running as after that I
> do not see any disconnect event been processed by glusterd for the brick
> process.
>
>
> Thanks for replying descriptively but please also clear some more doubts:
>
> 1. At this 10:14:25 moment of time brick is available because we have
> removed brick and added it again to make it online:
> following are the logs from cmd-history.log file of 000300
>
> [2016-04-03 10:14:21.446570] : volume status : SUCCESS
> [2016-04-03 10:14:21.665889] : volume remove-brick c_glusterfs replica
> 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
> [2016-04-03 10:14:21.764270] : peer detach 10.32.1.144 : SUCCESS
> [2016-04-03 10:14:23.060442] : peer probe 10.32.1.144 : SUCCESS
> [2016-04-03 10:14:25.649525] : volume add-brick c_glusterfs replica 2
> 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>
> and also 10:12:29 was the last reboot time before this failure. So I am
> totally agree what you said earlier.
>
> 2 .As you said at 10:12:29 glusterd restarted then why we are not
> getting 'brick start trigger' related logs
> like below between 10:12:29 to 10:14:25 time stamp which is something
> two minute of time interval.
1667 [2016-04-03 10:12:32.984331] I [MSGID: 106005]
[glusterd-handler.c:4908:__glusterd_brick_rpc_notify] 0-management:
Brick 10.32. 1.144:/opt/lvmdir/c2/brick has disconnected from
glusterd.
1668 [2016-04-03 10:12:32.984366] D [MSGID: 0]
[glusterd-utils.c:4872:glusterd_set_brick_status] 0-glusterd: Setting
brick 10.32.1. 144:/opt/lvmdir/c2/brick status to stopped
GlusterD received a disconnect event for this brick process and mark it
as stopped. This could happen due to two reasons. 1. brick process goes
down or 2. Network issue. In this case its the later I believe since the
brick process was running at that time. I'd request you to check this
from the N/W side.
> <mailto:Gluster-devel@xxxxxxxxxxx <mailto:Gluster-devel@xxxxxxxxxxx>>
>
> [2016-04-03 10:14:25.268833] I [MSGID: 100030] [glusterfsd.c:2318:main]
> 0-/usr/sbin/glusterfsd: Started running /usr/sbin/ glusterfsd
> version 3.7.6 (args: /usr/sbin/glusterfsd -s 10.32.1.144 --volfile-id
> c_glusterfs.10.32.1.144.opt-lvmdir-c2-brick -p /
> system/glusterd/vols/c_glusterfs/run/10.32.1.144-opt-lvmdir-c2-brick.pid
> -S /var/run/gluster/697c0e4a16ebc734cd06fd9150723005. socket
> --brick-name /opt/lvmdir/c2/brick -l
> /var/log/glusterfs/bricks/opt-lvmdir-c2-brick.log --xlator-option
> *-posix.glusterd- uuid=2d576ff8-0cea-4f75-9e34-a5674fbf7256
> --brick-port 49329 --xlator-option c_glusterfs-server.listen-port=49329)
>
> 3. We are continuously checking brick status in the above time duration
> using "gluster volume status" refer the cmd-history.log file from 000300
>
> In glusterd.log file we are also getting below logs
>
> [2016-04-03 10:12:31.771051] D [MSGID: 0]
> [glusterd-handler.c:4897:__glusterd_brick_rpc_notify] 0-management:
> Connected to 10.32.1.144:/opt/lvmdir/c2/brick
>
> [2016-04-03 10:12:32.981152] D [MSGID: 0]
> [glusterd-handler.c:4897:__glusterd_brick_rpc_notify] 0-management:
> Connected to 10.32.1.144:/opt/lvmdir/c2/brick
>
> two times b/w 10:12:29 and 10:14:25 and as you said these logs "
> clearly indicates that the brick is up and running as after" then why
> brick is not online in "gluster volume status" command
>
> [2016-04-03 10:12:33.990487] : volume status : SUCCESS
> [2016-04-03 10:12:34.007469] : volume status : SUCCESS
> [2016-04-03 10:12:35.095918] : volume status : SUCCESS
> [2016-04-03 10:12:35.126369] : volume status : SUCCESS
> [2016-04-03 10:12:36.224018] : volume status : SUCCESS
> [2016-04-03 10:12:36.251032] : volume status : SUCCESS
> [2016-04-03 10:12:37.352377] : volume status : SUCCESS
> [2016-04-03 10:12:37.374028] : volume status : SUCCESS
> [2016-04-03 10:12:38.446148] : volume status : SUCCESS
> [2016-04-03 10:12:38.468860] : volume status : SUCCESS
> [2016-04-03 10:12:39.534017] : volume status : SUCCESS
> [2016-04-03 10:12:39.553711] : volume status : SUCCESS
> [2016-04-03 10:12:40.616610] : volume status : SUCCESS
> [2016-04-03 10:12:40.636354] : volume status : SUCCESS
> ......
> ......
> ......
> [2016-04-03 10:14:21.446570] : volume status : SUCCESS
> [2016-04-03 10:14:21.665889] : volume remove-brick c_glusterfs replica
> 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
> [2016-04-03 10:14:21.764270] : peer detach 10.32.1.144 : SUCCESS
> [2016-04-03 10:14:23.060442] : peer probe 10.32.1.144 : SUCCESS
> [2016-04-03 10:14:25.649525] : volume add-brick c_glusterfs replica 2
> 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>
> In above logs we are continuously checking brick status but when we
> don't find brick status 'online' even after ~2 minutes then we removed
> it and add it again to make it online.
>
> [2016-04-03 10:14:21.665889] : volume remove-brick c_glusterfs replica
> 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
> [2016-04-03 10:14:21.764270] : peer detach 10.32.1.144 : SUCCESS
> [2016-04-03 10:14:23.060442] : peer probe 10.32.1.144 : SUCCESS
> [2016-04-03 10:14:25.649525] : volume add-brick c_glusterfs replica 2
> 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
>
> that is why in logs we are gettting "brick start trigger logs" at time
> stamp 10:14:25
>
> [2016-04-03 10:14:25.268833] I [MSGID: 100030] [glusterfsd.c:2318:main]
> 0-/usr/sbin/glusterfsd: Started running /usr/sbin/ glusterfsd
> version 3.7.6 (args: /usr/sbin/glusterfsd -s 10.32.1.144 --volfile-id
> c_glusterfs.10.32.1.144.opt-lvmdir-c2-brick -p /
> system/glusterd/vols/c_glusterfs/run/10.32.1.144-opt-lvmdir-c2-brick.pid
> -S /var/run/gluster/697c0e4a16ebc734cd06fd9150723005. socket
> --brick-name /opt/lvmdir/c2/brick -l
> /var/log/glusterfs/bricks/opt-lvmdir-c2-brick.log --xlator-option
> *-posix.glusterd- uuid=2d576ff8-0cea-4f75-9e34-a5674fbf7256
> --brick-port 49329 --xlator-option c_glusterfs-server.listen-port=49329)
>
>
> Regards,
> Abhishek
>
>
> Please note that all the logs referred and pasted are from 002500.
>
> ~Atin
> >
> > 002500 - Board B that brick is offline
> > 00300 - Board A logs
> >
> > >
> > > *Question : What could be contributing to brick offline?*
> > >
> > >
> > > --
> > >
> > > Regards
> > > Abhishek Paliwal
> > >
> > >
> > > _______________________________________________
> > > Gluster-devel mailing list
> > > Gluster-devel@xxxxxxxxxxx <mailto:Gluster-devel@xxxxxxxxxxx>
> > > http://www.gluster.org/mailman/listinfo/gluster-devel
> > >
> >
> >
> >
> >
>
>
>
>
> --
>
>
>
>
--
Regards
Abhishek Paliwal
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
