Re: Issue in Adding/Removing the gluster node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gaurav,

Thanks for reply

1. Here, I removed the board manually here but this time it works fine

[2016-02-18 10:03:40.601472]  : volume remove-brick c_glusterfs replica 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
[2016-02-18 10:03:40.885973]  : peer detach 10.32.1.144 : SUCCESS   

Yes this time board is reachable but how? don't know because board is detached.

2. Here, I attached the board this time its works fine in add-bricks

2016-02-18 10:03:42.065038]  : peer probe 10.32.1.144 : SUCCESS   
[2016-02-18 10:03:44.563546]  : volume add-brick c_glusterfs replica 2 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS

3.Here, again I removed the board this time failed occur

[2016-02-18 10:37:02.816089]  : volume remove-brick c_glusterfs replica 1 10.32.1.144:/opt/lvmdir/c2/brick force : FAILED : Incorrect brick 10.32.1.144:/opt
/lvmdir/c2/brick for volume c_glusterfs

but here board is not reachable.

why this inconsistency is there while doing the same step multiple time.

Hope you are getting my point.

Regards,
Abhishek

On Fri, Feb 19, 2016 at 3:25 PM, Gaurav Garg <ggarg@xxxxxxxxxx> wrote:
Abhishek,

when sometime its working fine means 2nd board network connection is reachable to first node. you can conform this by executing same #gluster peer status command.

Thanks,
Gaurav

----- Original Message -----
From: "ABHISHEK PALIWAL" <abhishpaliwal@xxxxxxxxx>
To: "Gaurav Garg" <ggarg@xxxxxxxxxx>
Cc: gluster-users@xxxxxxxxxxx
Sent: Friday, February 19, 2016 3:12:22 PM
Subject: Re: Issue in Adding/Removing the gluster node

Hi Gaurav,

Yes, you are right actually I am force fully detaching the node from the
slave and when we removed the board it disconnected from the another board.

but my question is I am doing this process multiple time some time it works
fine but some time it gave these errors.


you can see the following logs from cmd_history.log file

[2016-02-18 10:03:34.497996]  : volume set c_glusterfs nfs.disable on :
SUCCESS
[2016-02-18 10:03:34.915036]  : volume start c_glusterfs force : SUCCESS
[2016-02-18 10:03:40.250326]  : volume status : SUCCESS
[2016-02-18 10:03:40.273275]  : volume status : SUCCESS
[2016-02-18 10:03:40.601472]  : volume remove-brick c_glusterfs replica 1
10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
[2016-02-18 10:03:40.885973]  : peer detach 10.32.1.144 : SUCCESS
[2016-02-18 10:03:42.065038]  : peer probe 10.32.1.144 : SUCCESS
[2016-02-18 10:03:44.563546]  : volume add-brick c_glusterfs replica 2
10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS
[2016-02-18 10:30:53.297415]  : volume status : SUCCESS
[2016-02-18 10:30:53.313096]  : volume status : SUCCESS
[2016-02-18 10:37:02.748714]  : volume status : SUCCESS
[2016-02-18 10:37:02.762091]  : volume status : SUCCESS
[2016-02-18 10:37:02.816089]  : volume remove-brick c_glusterfs replica 1
10.32.1.144:/opt/lvmdir/c2/brick force : FAILED : Incorrect brick
10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs


On Fri, Feb 19, 2016 at 3:05 PM, Gaurav Garg <ggarg@xxxxxxxxxx> wrote:

> Hi Abhishek,
>
> Seems your peer 10.32.1.144 have disconnected while doing remove brick.
> see the below logs in glusterd:
>
> [2016-02-18 10:37:02.816009] E [MSGID: 106256]
> [glusterd-brick-ops.c:1047:__glusterd_handle_remove_brick] 0-management:
> Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs
> [Invalid argument]
> [2016-02-18 10:37:02.816061] E [MSGID: 106265]
> [glusterd-brick-ops.c:1088:__glusterd_handle_remove_brick] 0-management:
> Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs
> The message "I [MSGID: 106004]
> [glusterd-handler.c:5065:__glusterd_peer_rpc_notify] 0-management: Peer
> <10.32.1.144> (<6adf57dc-c619-4e56-ae40-90e6aef75fe9>), in state <Peer in
> Cluster>, has disconnected from glusterd." repeated 25 times between
> [2016-02-18 10:35:43.131945] and [2016-02-18 10:36:58.160458]
>
>
>
> If you are facing the same issue now, could you paste your # gluster peer
> status     command output here.
>
> Thanks,
> ~Gaurav
>
> ----- Original Message -----
> From: "ABHISHEK PALIWAL" <abhishpaliwal@xxxxxxxxx>
> To: gluster-users@xxxxxxxxxxx
> Sent: Friday, February 19, 2016 2:46:35 PM
> Subject: Issue in Adding/Removing the gluster node
>
> Hi,
>
>
> I am working on two board setup connecting to each other. Gluster version
> 3.7.6 is running and added two bricks in replica 2 mode but when I manually
> removed (detach) the one board from the setup I am getting the following
> error.
>
> volume remove-brick c_glusterfs replica 1 10.32.1.144:/opt/lvmdir/c2/brick
> force : FAILED : Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for
> volume c_glusterfs
>
> Please find the logs file as an attachment.
>
>
> Regards,
> Abhishek
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users@xxxxxxxxxxx
> http://www.gluster.org/mailman/listinfo/gluster-users
>



--




Regards
Abhishek Paliwal



--




Regards
Abhishek Paliwal
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux